Analysis of the galvanised steel sheets resistance to corrosion after plastic deformation

Evin, E.; Tomáš, M.; Graban, J.; Tóth, M.

doi:10.1515/kom-2016-0018

Abstract

Nowadays, number of customer and environmental requirements are laid to the automotive industry. These are related to safety increase, the weight and emission reduction as well as the life-time improvement. The article presents the way to improve the corrosion resistance of the car-body components when coated steel sheets are used based on Zn-Al-Mg coatings. Thus, the life-time of the car-body is improved. Samples with conventional Zn coating and samples with advanced Zn-Al-Mg coatings were deformed by stretching and 3-point bending to 90° and 180° tests. Consequently, the samples were exposed to salt spray in the corrosion chamber. Time to red corrosion appearance and adequate percentage of corroded surface was evaluated. The results showed the better corrosion protection of Zn-Al-Mg coatings when compared to the conventional Zn coating.

References

1. Hagarová M. Povrchové úpravy v automobilovom priemysle. 1st ed. 2013. 104 p. ISBN 978-80-553-1566-9.
Search in Google Scholar Back to article
2. Chovancová M. et al. Základy korózie a povrchovej úpravy materiálov. 1st ed. 2010. ISBN 978-80-227-3378-6.
Search in Google Scholar Back to article
3. Graban J. et al. Hodnotenie koróznej odolnosti pozinkovaných plechov s tenkými organickými povlakmi s protiotlačkovými vlastnosťami. Metal 2008: Sborník přednášek ze 17. mezinárodní konference metalurgie a materiálů, 13.-15. 5. 2008, Červený zámek, Hradec nad Moravicí, Česká republika. TANGER spol. s r.o. 2008. ISBN 978-80-254-1987-8
Search in Google Scholar Back to article
4. Kolnerová, M., Solfronk, P. Morfológie plechů se zinkovým povlakem používaných v automobilovém průmyslu. Metal 2001: Sborník přednášek 10. mezinárodní konference metalurgie a materiálů, 15.-17. 5. 2001, Hotel ATOM, Ostrava, Česká republika. TANGER spol. s r.o. 2001.
Search in Google Scholar Back to article
5. Evin E., Kollárová M. Tribologické vlastnosti pozinkovaných plechov pre karosérie áut. Chemické listy 2011, 105, s465-s467.
Search in Google Scholar Back to article
6. Evin E., et al. Some Tribological aspects of Fe-Zn Coated steel sheets at Stamping Processes. Acta Metallurgica Slovaca 2014, 2, 189-199.10.12776/ams.v20i2.298
Search in Google Scholar Back to article
7. Tanaka S., Honda K., Takahashi A. Proc. 5th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Verlag Stahleisen GmbH, Dusseldorf, 2001, p. 153.
Search in Google Scholar Back to article
8. Tsujimura T., Komatsu A., Andoh A., Proc. 5th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Verlag Stahleisen GmbH, Dusseldorf, 2001, p 145.
Search in Google Scholar Back to article
9. Graban J. et al. Hodnotenie koróznej odolnosti pozinkovaných plechov s tenkými organickými povlakmi s protiotlačkovými vlastnosťami. Metal 2013: Sborník přednášek ze 17. mezinárodní konference metalurgie a materiálů, 13.-15. 5. 2008, Červený zámek, Hradec nad Moravicí, Česká republika. TANGER spol. s r.o. 2008. ISBN 978-80-254-1987-8
Search in Google Scholar Back to article
10. Schrek A. Deformation properties of tailor-welded blank made of dual phase steels. Acta Mechanica et Automatica 2016, 10-1, 38-4210.1515/ama-2016-0007
Search in Google Scholar Back to article
11. Rouet N. Galvanized steel sheet in an automotive sector as a barometer of Zinc market growth. Metal Bulletin -18th Zinc & its Markets Seminar, Lisbon October 23rd, 2014
Search in Google Scholar Back to article
12. Kolnerová, M., Sobotka, J., Solfronk, P., Doubek, P.: Properties of Metal Sheets Surfaces by Manufacturing of Car Body Stampings. Metal 2007: Sborník přednášek 16. mezinárodní konference metalurgie a materiálů, 15.-17. 5. 2001, Hradec nad Moravici, Ostrava, Česká republika. TANGER spol. s r.o. 2007
Search in Google Scholar Back to article
13. Newman R. Corrosion in sulphuric acid, Journal of Corrosion 2010, 43, 2505-2512
Search in Google Scholar Back to article
14. Schürz, S., Fleischanderl, M., Mori, G., Stellnberger, K.- H., & Luckeneder, G. H. Corrosion Behavior of Zn-Al-Mg Coated Steel In Different Environments, CORROSION 2011, 13-17 March, Houston, Texas, NACE International, 2011
Search in Google Scholar Back to article

Analysis of the galvanised steel sheets resistance to corrosion after plastic deformation

Abstract

Paradigm

My account