References
- 1. ČSN EN ISO 9227, Korozní zkoušky v umělých atmosférách – Zkoušky solnou mlhou, Český normalizační institut, 2007.
- 2. Test method D17 2028, Corrosion test by automatic change of phases of salt spray, drying and humidity (ECC1), Standardisation of Renault Automobiles, DMI / Service 65810, 2007.
- 3. T. Prošek, M. Kouřil, M. Dubus, M. Taube, V. Hubert, B. Scheffel, Y. Degres, M. Jouannic, D. Thierry, Real-time monitoring of indoor air corrosivity in cultural heritage institutions with metallic electrical resistance sensors, Studies in Conservation2013, 58, 117–128.10.1179/2047058412Y.0000000080
- 4. SEP 1850, Zyklische Korrosionsprüfung von Werkstoffen und Bauteilen im Automobilbaum / Cyclic corrosion testing of materials and components in automotive construction, 1st Edition, Stahlinstitut VDEh, August 2012.
- 5. T. Prošek, N. Le Bozec, D. Thierry, Application of automated corrosion sensors for monitoring the rate of corrosion during accelerated corrosion tests, Materials and Corrosion2014, 65, 448–456.10.1002/maco.201206655
- 6. N. LeBozec, N. Blandin, D. Thierry, Accelerated corrosion tests in the automotive industry: A comparison of the performance towards cosmetic corrosion, Materials and Corrosion2008, 59, 889–894.10.1002/maco.200804168
- 7. J. Stoulil, T. Prošek, A. Nazarov, J. Oswald, P. Kříž, D. Thierry: Electrochemical properties of corrosion products on Zn-Al-Mg based coatings, Materials and Corrosion2015, 66, 777–782.10.1002/maco.201408058
- 8. T. Prošek, D. Persson, J. Stoulil, D. Thierry, Composition of corrosion products formed on Zn–Mg, Zn–Al and Zn–Al–Mg coatings in model atmospheric conditions, Corrosion Science2014, 86, 231–238.10.1016/j.corsci.2014.05.016
- 9. N. LeBozec, D. Thierry, P.-E. Augustsson, M. Zapponi, D. Francis, M. Grogna, D. Koberg, L. Opdam, New cyclic test for building coil coated materials, sborník z konference Galvatech 2013, Peking, Čína, příspěvek W019.
- 10. T. Prošek, N. Larché, M. Vlot, F. Goodwin, D. Thierry, Corrosion performance of Zn–Al–Mg coatings in open and confined zones in conditions simulating automotive applications, Materials and Corrosion2010, 60, 412–420.10.1002/maco.200905425
- 11. T. Koll, F. Beier, T. Boddeker, M. Hinkel, C. Fritzsche, S. Schulz, Performance of a ZM-coating with 1.6% Mg and 1.6% Al in the autobody process chain, SCT 2014, Future trends in steel development, processing technologies and applications, pp. 530–537, Verlag Stahleisen GmbH: Dusseldorf, Německo, 2014.
- 12. C. Schwerdt, M. Riemer, S. Kohler, B. Schuhmacher, M. Steinhorst, A. Zwick, sborník konference Galvatech‚ 04, Chicago, USA, pp. 783–793, 2004.
- 13. M. Vlot, R. Bleeker, T. Maalman, E. van Perlstein, Magi-ZincTM, A new generation of hot-dip galvanised products, sborník konference Galvanized Steel Sheet Forum 2006, Düsseldorf, Německo.