References
- ASTM C1138M-12, 2012. Standard Test Method for Abrasion Resistance of Concrete (Underwater Method). ASTM International, West Conshohocken, PA.
- Cheng, N.S., Law, A.W.K., 2003. Exponential formula for computing effective viscosity. Powder Technol., 129, 156-160.
- Clark, H. McI, 2002. Particle velocity and size effects in laboratory slurry erosion measurements OR... do you know what your particles are doing? Tribol. Int., 35, 617-624.
- Cooke, R., 1996. Pipeline material evaluation for the Mina Grande hydrohoist system. In: Proc. 13th Int. Conf. on Hydrotransport, Johannesburg, South Africa, pp. 455-477.
- Dalfré Filho, J.G., Genovez, A.I.B., Paulon, W.A., 2000. Wear in hydraulic structures and concrete resistance to water-solid mixture. Ingeniería Estructural, 8, 20, 18-22. (In Portuguese.)
- Dandapat, R., Deb, A., 2016. A probability based model for the erosive wear of concrete by sediment bearing water. Wear, 350-351, 165-181.
- Fokema, M.D., Kresta, S.M., Wood, P.E., 1994. Importance of using the correct impeller boundary conditions for CFD simulations of stirred tanks. Can. J. Chem. Eng., 72, 177-183.
- Gnanavelu, A., Kapur, N., Neville, A., Flores, J.F., Ghorbani, N., 2011. A numerical investigation of a geometry independent integrated method to predict erosion rates in slurry erosion. Wear, 271, 712-719.
- Graham, J.R., 1998. Erosion of concrete in hydraulic structures. Reported by ACI Committee 210, ACI manual practice, Part 1.
- Horszczaruk, E.K., 2000. Abrasion-erosion of concrete. Arch. Civ. Eng., 46, 585-609.
- Horszczaruk, E.K., 2004. The model of abrasive wear of concrete in hydraulic structures. Wear, 256, 787-796.
- Horszczaruk, E.K., 2005. Abrasion resistance of high-strength concrete in hydraulic structures. Wear, 259, 62-69.
- Horszczaruk, E.K, 2008. Mathematical model of abrasive wear of high performance concrete. Wear, 264, 113-118.
- Horszczaruk, E.K., 2009. Hydro-abrasive erosion of high performance fiber-reinforced concrete. Wear, 267, 1-4, 110-115.
- Jirout, T., Rieger, F., 2011. Impeller design for mixing of suspensions. Chem. Eng. Res. Des., 89, 1144-1151.
- Kumar, R.G.B., Sharma, U.K., 2014. Abrasion resistance of concrete containing marginal aggregates. Construction and Building Materials, 66, 712-722.
- Launder, B.E., Spalding, D.B., 1972. Mathematical Models of Turbulence. Academic Press, London.
- Launder, B.E., Spalding, D.B., 1974. The numerical computation of turbulent flows. Comput. Meth. Appl. Mech. Eng., 3, 269-289.10.1016/0045-7825(74)90029-2
- Liu, Y.W, Yen, T., Hsu, T.H., 2006. Abrasion erosion of concrete by water-borne sand. Cem. Concr. Res., 36, 1814-1820.
- Liu, Y.W, Cho, S.W., Hsu, T.H., 2012. Impact abrasion of hydraulic structures concrete. J. Mar. Sci. Tech.-Japan, 20, 3, 253-258.
- Mak, A.T.C., 1992. Solid-liquid mixing in mechanically-agitated vessels. PhD Thesis. University College, London UK.
- Mansouri, A., Arabnejad, H., Shirazi, S.A., McLaury, B.S., 2015. A combined CFD/experimental methodology for erosion prediction. Wear, 332-333, 1090-1097.
- Messa, G.V., Malavasi, S., 2014a. Computational investigation of liquid-solid slurry flow through an expansion in a rectangular duct. J. Hydrol. Hydromech., 62, 234-240.
- Messa, G.V., Malavasi, S., 2014b. Numerical prediction of particle distribution of solid-liquid slurries in straight pipies and bends. Eng. Appl. Comput. Fluid Mech., 8, 3, 356-372.
- Messa, G.V., Malavasi, S., 2015. Improvements in the numerical prediction of fully-suspended slurry flow in horizontal pipes. Powder Technol., 270, 358-367.
- Messa, G.V., Malavasi, S., 2017. The effect of sub-models and parameterizations in the simulation of abrasive jet impingement tests. Wear, 370-371, 59-72.
- Messa, G.V., Malin, M., Malavasi S., 2013. Numerical prediction of pressure gradient of slurry flows in horizontal pipes. In: Proc. ASME Pressure Vessels and Piping PVP2013 Conf. (Paris, France). Paper No. PVP2013-97460.
- Messa, G.V., Malin, M., Malavasi S., 2014. Numerical prediction of fully-suspended slurry flow in horizontal pipes. Powder Technol., 256, 61-70.
- Mohebi, R., Behfarnia, K., Shojaei, M., 2015. Abrasion resistance of alkali-activated slag concrete designed by Taguchi method. Constr. Build. Mater., 98, 792-798.
- NBR 5738, 2003. Moulding and cure of concrete cylindrical and prismatic test pieces. ABNT-Brazilian Association for Technical Standards, Rio de Janeiro, Brazil.
- Parsi, M., Najmi, K., Najafifard, F., Hassani, S., McLaury, B.S., Shirazi, S.A., 2014. A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications. J. Nat. Gas Sci. Eng., 21, 850-873.10.1016/j.jngse.2014.10.001
- Picardi, R., Zhao, L., Battaglia, F., 2016. On the ideal grid resolution for two-dimensional eulerian modeling of gas-liquid flows. ASME J. Fluids Eng., 138, No. 114503.
- Shiller, L., Naumann, A., 1935. A drag coefficient correlation. Z. Ver. Dtsch. Ing., 77, 318-320.
- Spalding, D.B., 1972. A novel finite-difference formulation for differential expresions involving both first and second derivatives. Int. J. Numer. Methods Eng., 4, 551-559.10.1002/nme.1620040409
- Spalding, D.B., 1980. Numerical computation of multi-phase fluid flow and heat transfer. In: Taylor, C., Morgan, K. (Eds.): Recent Advances in Numerical Methods in Fluids. Pineridge Press Limited, Swansea.
- Yen, T.Y., Hsu, T.H., Liu, Y.W., Chen, S.H., 2007. Influence of class F fly ash on the abrasion-erosion resistance of high-strength concrete. Constr. Build. Mater., 21, 2007, 458-463.10.1016/j.conbuildmat.2005.06.051
- Zwietering, T.N., 1958. Suspending of solid particles in liquid by agitators. Chem. Eng. Sci., 8, 244-253.