Have a personal or library account? Click to login
The Limit Deposit Velocity model, a new approach Cover

The Limit Deposit Velocity model, a new approach

Journal of Hydrology and Hydromechanics
Volume 63 (2015): Issue 4 (December 2015)
By: Sape A. Miedema and  Robert C. Ramsdell  
Open Access
|Oct 2015

References

  1. Azamathulla, H.M., Ahmad, Z., 2013. Estimation of critical velocity for slurry transport through pipeline using adaptive neuro-fuzzy interference system and gene-expression programming. Journal of Pipeline Systems Engineering and Practice, 131–137.10.1061/(ASCE)PS.1949-1204.0000123
    Search in Google Scholar
  2. Berg, C.H., 1998. Pipelines as transportation systems. In: Proceedings of the European Mining Course. IHC-MTI, Kinderdijk, the Netherlands.
    Search in Google Scholar
  3. Charles, M.E., 1970. Transport of solids by pipeline. Hydrotransport 1. BHRA, Cranfield.
    Search in Google Scholar
  4. Davies, J.T., 1987. Calculation of critical velocities to maintain solids in suspension in horizontal pipes. Chemical Engineering Science, 42, 7, 1667–1670.10.1016/0009-2509(87)80171-9
    Search in Google Scholar
  5. Durand, R., 1953. Basic Relationships of the Transportation of Solids in Pipes - Experimental Research. In: Proceedings of the International Association of Hydraulic Research. Minneapolis.
    Search in Google Scholar
  6. Durand, R., Condolios, E., 1952. Etude experimentale du refoulement des materieaux en conduites en particulier des produits de dragage et des schlamms. [Experimental study of the discharge pipes materieaux especially products of dredging and slurries]. Deuxiemes Journees de l'Hydraulique, 27–55. (In French.)
    Search in Google Scholar
  7. Fuhrboter, A., 1961. Über die Förderung von Sand-Wasser-Gemischen in Rohrleitungen. [On the advances of sand - water mixtures in pipelines]. Mitteilungen des Franzius-Instituts, H. 19.(In German.)
    Search in Google Scholar
  8. Garcia, M.H., 2008. Sedimentation Engineering (Vol. 110). ASCE Manuals & Reports on Engineering Practise No. 110.
    Search in Google Scholar
  9. Gibert, R., 1960. Transport hydraulique et refoulement des mixtures en conduites. [Hydraulic transport and discharge pipes of mixtures]. Annales des Ponts et Chausees, 130, 3, 307–374, 130, 4, 437–494. (In French.)
    Search in Google Scholar
  10. Gillies, R.G., 1993. Pipeline flow of coarse particles, PhD Thesis. University of Saskatchewan, Saskatoon.
    Search in Google Scholar
  11. Gogus, M., Kokpinar, M.A., 1993. Determination of critical flow velocity in slurry transporting pipeline systems. In: Proceeding of the 12th International Conference on Slurry Handling and Pipeline Transport. British Hydraulic Research Group, Bedfordshire, UK, pp. 743–757.
    Search in Google Scholar
  12. Graf, W.H., Robinson, M., Yucel, O., 1970. The critical deposit velocity for solid-liquid mixtures. Hydrotransport 1. BHRA, Cranfield, UK, pp. H5-77–H5-88.
    Search in Google Scholar
  13. Hepy, F.M., Ahmad, Z., Kansal, M.L., 2008. Critical velocity for slurry transport through pipeline. Dam Engineering, 19, 3, 169–184.
    Search in Google Scholar
  14. Jufin, A.P., Lopatin, N.A., 1966. O projekte TUiN na gidrotransport zernistych materialov po stalnym truboprovodam. [TUiN project on hydrotransport of grain materials in steel tubes]. Gidrotechniceskoe Strojitelstvo, 9, 49–52. (In Russian.)
    Search in Google Scholar
  15. Kokpinar, M.A., Gogus, M., 2001. Critical velocity in slurry transport in horizontal pipelines. Journal of Hydraulic Engineering, 127, 9, 763–771.10.1061/(ASCE)0733-9429(2001)127:9(763)
    Search in Google Scholar
  16. Lahiri, S.K., 2009. Study on slurry flow modelling in pipeline. National Institute of Technology, Durgapur, India.
    Search in Google Scholar
  17. Miedema, S.A., 2012a. Constructing the Shields Curve: Part A Fundamentals of the Sliding, Rolling and Lifting Mechanisms for the Entrainment of Particles. Journal of Dredging Engineering, 12., 1–49.
    Search in Google Scholar
  18. Miedema, S.A., 2012b. Constructing the Shields Curve: Part B Sensitivity Analysis, Exposure & Protrusion Levels, Settling Velocity, Shear Stress & Friction Miedema, S.A., 2014 Velocity, Erosion Flux and Laminar Main Flow. Journal of Dredging Engineering, 12, 50–92.
    Search in Google Scholar
  19. Miedema, S.A., 2014. An analytical approach to explain the Fuhrboter equation. Maritime Engineering, 167, 2, 1–14.10.1680/maen.13.00023
    Search in Google Scholar
  20. Miedema, S.A., 2015a. A head loss model for homogeneous slurry transport. Journal of Hydrology and Hydromechanics, 1, 1–12.10.1515/johh-2015-0005
    Search in Google Scholar
  21. Miedema, S.A., 2015b. Head loss model for slurry transport in the heterogeneous regime. Journal of Ocean Engineering, 12., 50–92.
    Search in Google Scholar
  22. Miedema, S.A., 2015c. The Slip Ratio or Holdup Function in Slurry Transport. Dredging Summit and Expo 2015. WEDA, Houston, Texas, USA, p. 12.
    Search in Google Scholar
  23. Miedema, S.A., Matousek, V., 2014. An explicit formulation of bed friction factor for sheet flow. In: Proc. 15th International Freight Pipeline Society Symposium, IFPS, Prague, Czech Republic, p. 17.
    Search in Google Scholar
  24. Miedema, S.A., Ramsdell, R.C., 2013. A head loss model for slurry transport based on energy considerations. In: Proc. XX World Dredging Conference, WODA, Brussels, Belgium, p. 14.
    Search in Google Scholar
  25. Miedema, S.A., Ramsdell, R.C., 2014a. An analysis of the hydrostatic approach of wilson for the friction of a sliding bed. WEDA/TAMU. WEDA, Toronto, Canada, p. 21.
    Search in Google Scholar
  26. Miedema, S.A., Ramsdell, R.C., 2014b. The Delft Head Loss & Limit Deposit Velocity Model. In: Hydrotransport, BHR Group, Denver, USA, p. 15.
    Search in Google Scholar
  27. Newitt, D.M., Richardson, M.C., Abbott, M., Turtle, R.B., 1955. Hydraulic conveying of solids in horizontal pipes. Transactions of the Institution of Chemical Engineers, 33, 93–110.
    Search in Google Scholar
  28. Oroskar, A.R., Turian, R.M., 1980. The hold up in pipeline flow of slurries. AIChE, 26, 550–558.10.1002/aic.690260405
    Search in Google Scholar
  29. Parzonka, W., Kenchington, J.M., Charles, M.E., 1981. Hydrotransport of solids in horizontal pipes: Effects of solids concentration and particle size on the deposit velocity. Canadian Journal of Chemical Engineering, 59, 291–296.10.1002/cjce.5450590305
    Search in Google Scholar
  30. Poloski, A.P., Etchells, A.W., Chun, J., Adkins, H.E., Casella, A.M., Minette, M.J., Yokuda, S., 2010. A pipeline transport correlation for slurries with small but dense particles. Canadian Journal of Chemical Engineering, 88, 182–189.10.1002/cjce.20260
    Search in Google Scholar
  31. Ramsdell, R.C., Miedema, S.A., 2013. An overview of flow regimes describing slurry transport. In: WODCON XX, WODA, Brussels, Belgium, p. 15.
    Search in Google Scholar
  32. Sanders, R.S., Sun, R., Gillies, R.G., McKibben, M., Litzenberger, C., Shook, C.A., 2004. Deposition velocities for particles of intermediate size in turbulent flows. In: Hydrotransport 16, BHR Group, Santiago, Chile, pp. 429– 442.
    Search in Google Scholar
  33. Schiller, R.E., Herbich, J.B., 1991. Sediment Transport in Pipes. Handbook of Dredging. McGraw-Hill, New York.
    Search in Google Scholar
  34. Shook, C.A., Gillies, R.G., Sanders, R.S., 2002. Pipeline Hydrotransport with Application in the Oil Sand Industry. SRC Publication 11508-1E02, Saskatchewan Research Council, Saskatoon, Canada.
    Search in Google Scholar
  35. Souza Pinto, T.C., Moraes Junior, D., Slatter, P.T., Leal Filho, L.S., 2014. Modelling the critical velocity for heterogeneous flow of mineral slurries. International Journal of Multiphase Flow, 65, 31–37.10.1016/j.ijmultiphaseflow.2014.05.013
    Search in Google Scholar
  36. Thomas, A.D., 1979. Predicting the deposit velocity for horizontal turbulent pipe flow of slurries. International Journal of Multiphase Flow, 5, 113–129.10.1016/0301-9322(79)90040-5
    Search in Google Scholar
  37. Thomas, A.D., 2014. Slurries of most interest to the mining industry flow homogeneously and the deposit velocity is the key parameter. In: HydroTransport 19, BHR Group, Denver, Colorado, USA, pp. 239–252.
    Search in Google Scholar
  38. Thomas, D.G., 1962. Transport characteristics of suspensions: Part VI. Minimum velocity for large particle size suspensions in round horizontal pipes. A.I.Ch.E. Journal, 8, 3, 373–378.10.1002/aic.690080323
    Search in Google Scholar
  39. Thomas, D.G., 1965. Transport characteristics of suspensions: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles. Journal of Colloidal Sciences, 20, 267–277.10.1016/0095-8522(65)90016-4
    Search in Google Scholar
  40. Turian, R.M., Hsu, F. L., Ma, T.W., 1987. Estimation of the critical velocity in pipeline flow of slurries. Powder Technology, 51, 35–47.10.1016/0032-5910(87)80038-4
    Search in Google Scholar
  41. Wasp, E.J., Slatter, P.T., 2004. Deposition velocities for small particles in large pipes. In: Proc. 12th International Conference on Transport & Sedimentation of Solid Particles, Prague, Czech Republic, pp. 20–24.
    Search in Google Scholar
  42. Wasp, E.J., Kenny, J.P., Aude, T.C., Seiter, R.H., Jacques, R.B., 1970. Deposition velocities transition velocities and spatial distribution of solids in slurry pipelines. In: Hydro Transport 1, paper H42, BHRA Fluid Engineering, Coventry, pp. 53–76.
    Search in Google Scholar
  43. Wasp, E.J., Kenny, J.P., Gandhi, R.L., 1977. Solid liquid flow slurry pipeline transportation. Transactions Technical Publications.
    Search in Google Scholar
  44. Wilson, K.C., 1979. Deposition limit nomograms for particles of various densities in pipeline flow. In: Hydrotransport 6, BHRA, Canterbury, UK, p. 12.
    Search in Google Scholar
  45. Wilson, K.C., Judge, D.G., 1976. New techniques for the scale-up of pilot plant results to coal slurry pipelines. In: Proceedings International Symposium on Freight Pipelines, University of Pensylvania, Washington DC, USA, pp. 1–29.
    Search in Google Scholar
  46. Wilson, K.C., Judge, D.G., 1977. Application of analytical model to stationary deposit limit in sand water slurries. In: Dredging Technology, BHRA Fluid Engineering, College Station, Texas, USA, pp. J1 1–12.
    Search in Google Scholar
  47. Wilson, K.C., Addie, G.R., Clift, R., 1992. Slurry Transport using Centrifugal Pumps. Elsevier Applied Sciences, New York.
    Search in Google Scholar
  48. Wilson, W.E., 1942. Mechanics of flow with non colloidal inert solids. Transactions ASCE, 107, 1576–1594.10.1061/TACEAT.0005556
    Search in Google Scholar
  49. Yagi, T., Okude, T., Miyazaki, S., Koreishi, A., 1972. An Analysis of the Hydraulic Transport of Solids in Horizontal Pipes. Nagase, Yokosuka, Japan. Report of the Port & Harbour Research Institute, Vol. 11, No. 3.
    Search in Google Scholar
  50. Zandi, I., Govatos, G., 1967. Heterogeneous flow of solids in pipelines. Proc. ACSE, J. Hydraul. Div., 93(HY3), 145–159.10.1061/JYCEAJ.0001608
    Search in Google Scholar
DOI: https://doi.org/10.1515/johh-2015-0034 | Journal eISSN: 1338-4333 | Journal ISSN: 0042-790X
Journal RSS Feed
Language: English
Page range: 273 - 286
Submitted on: Nov 11, 2014
Accepted on: Jun 15, 2015
Published on: Oct 20, 2015
Published by: Slovak Academy of Sciences, Institute of Hydrology; Institute of Hydrodynamics, Czech Academy of Sciences, Prague
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Critical velocity,
Limit Deposit Velocity,
Slurry transport,
Newtonian fluid
Related subjects:
Engineering,
Introductions and overviews,
Engineering, other

© 2015 Sape A. Miedema, Robert C. Ramsdell, published by Slovak Academy of Sciences, Institute of Hydrology; Institute of Hydrodynamics, Czech Academy of Sciences, Prague
This work is licensed under the Creative Commons Attribution 4.0 License.

Volume 63 (2015): Issue 4 (December 2015)Next article