References
- [1] M. Wilch, V. S. Pappala, S. N. Singh and I. Erlich, “Reactive Power Generation by DFIG Based Wind Farms with AC Grid Connection”, IEEE Power Tech, Lausanne, July 2007, 626-632.
- [2] A. Ashraf, “On Reactive Power Compensation of Wind Farms Impact of Wind Farm Controller Delays”, Master of Science Thesis in Electric Power Engineering, Department of Energy and Environment, Division of Electric Power Engineering, Chalmers University of Technology, Gothenburg, Sweden, June 2012.
- [3] M. P. Kazmierkowski, R. Krishnan and F. Blaabjerg, “Control in Power Electronics - Selected Problems”, New York, Academic, 2002.
- [4] G. Fandi, J. Svec and Z. Muller, “The Converter Choice and its Control Circuit Design for Synchronous Generators”, 14th International Scientific Conference on Electric Power Engineering (EPE), Kouty nad Desnou, May 2013, 697-701.
- [5] F. D. Gonzialez, M. Martinez-Rojas, A. Sumper, O. Gomis-Bellmunt and L. Trilla, “Strategies for Reactive Power Control in Wind Farms with STATCOM”, EPE Wind Energy Chapter Symposium, 2010, 1-10,.
- [6] S. M. Yousuf and S. Arthi, “Reactive Power Improvement in Wind Farm by Using UPQC”, International Journal of Science and Research (IJSR) 3 no, 4 (April 2014), 403-408.
- [7] M. Milligan, K. Porter, E. Demeo, P. Denholm, H. Holttinen, B. Kirby, N. Miller, A. Mills, M. O’malley, M. Schuerger and L. Soder, “Wind Power Myths Debunked”, IEEE Power and Energy Magazine, 7 no. 6 (November/December 2009), 89-99.10.1109/MPE.2009.934268
- [8] F. Blaabjerg, M. Liserre and K. Ma, “Power Electronics Converters for Wind Turbine Systems”, IEEE Transactions on Industry Applications, 48 no. 2 (March/April 2012), 708-719.
- [9] G. Fandi, F. O. Igbinovia, Z. Muller, J. Svec and J. Tlusty, “Using Renewable MV Wind Energy Resource to Supply Reactive Power in MV Distribution Network”, IEEE16th International Scientific Conference on Electric Power Engineering (EPE), Kouty nad Desnou, May 2015, 169-173,.
- [10] G. Fandi, F. O. Igbinovia, J. Svec, Z. Muller and J. Tlusty, “Advantageous Positioning of Wind Turbine Generating System in MV Distribution Network”, IEEE17th International Scientific Conference on Electric Power Engineering (EPE), Prague, May 2016.
- [11] M. Liserre, R. Cardenas, M. Molinas and J. Rodriguez, “Overview of multi-MW wind turbines and wind parks”, IEEE Transactions on Industrial Electronics, 58 no. 4 (April 2011), 1081-1095.10.1109/TIE.2010.2103910
- [12] F. Janicek, M. Mucha, K. Cesnek and J. Kovacik, “Controlled Switching of the T402 Transformer in the Krizovany 400kV Substation”, Journal of Electrical Engineering, 61 no. 1 (January 2010), 11-19.
- [13] J. Snajdr, J. Sedlacek and Z. Vostracky, “Application of A Line Ampacity Model and Its Use in Transmission Lines Operations”, Journal of Electrical Engineering, 65 no. 4 (2014), 221-227.
- [14] P. T. Orsgov, “Ripple Control Signal Using for Earth Fault Location in MV Networks”, Journal of Electrical Engineering, 56 no. 11-12 (2005), 313-321.
- [15] M. Kolcun and J. Szkutnik, “The Methodology for Optimization of Energy Distribution Network”, Journal of Electrical Engineering, 60 no. 4 (July 2009) 219-222.
- [16] Z. Chen, J. M. Guerrero and F. Blaabjerg, “A Review of the State of the Art of Power Electronics for Wind Turbines”, IEEE Transactions on Power Electronics, 24 no. 8 (August 2009), 1859-1875.
- [17] A. D. Hansen, F. Iov, F. Blaabjerg and L. H. Hansen, “Review of Contemporary Wind Turbine Concepts and Their Market Penetration”, Wind Engineering, 28 no. 3 (May 2004), 247-263.
- [18] F. Blaabjerg and K. Ma, “Future on Power Electronics for Wind Turbine Systems”, IEEE Journal of Emerging and Selected Topics in Power Electronics, 1 no. 3 (September 2013), 139-152.