References
- [1] E. S. Hamdi, Design of Small Electrical Machines, John Wiley & Sons, New York 1994, pp. 115–155.
- [2] K. Makowski and M. J. Wilk, “Optimization of a Single-Phase Capacitor Induction Motor by Applying a Surrogate Field-Circuit Model”, COMPEL, vol. 33, no. 6, pp. 1891–1903, 2014.10.1108/COMPEL-11-2013-0359
- [3] L. Petkovska and G. Cvetkovski, “FEM based Assessment of Capacitor Sizing Characteristics of a Single-Phase Induction Motor”, Prezglad Elektrotechniczny, vol. 86, no. 12, pp. 113–116, 2010.
- [4] S. Sobhani, H. Yaghobi and M. Samakoosh, “Optimize Efficency and Torque Single-Phase Induction Motor by Adjusting the Design Parameters”, 12-th International conference Enviroment and Electrical Engineering, Wroclaw, pp. 237–241, 2013.
- [5] S. Subramanian and R. Bhuvaneswani, “Optimal Design of Single-Phase Induction Motor using Particle Swam Optimization”, COMPEL, vol. 26, no. 2, pp. 418–430, 2007.10.1108/03321640710727773
- [6] I. Boldea, S.A. Nasar, The Induction Machines Design Handbook, Boca Raton, CRC Press, 2010, pp. 791–811, pp. 805–807.
- [7] W. H. Yeadon, A.W. Yeadon, Handbook of Small Electric Motors, New York, McGraww-Hill, 2003, pp. 6-1–6-45.
- [8] I. E. Davidson, “Performance Calculation of a Shaded-Pole Single Sided Linear Induction Motor Using Symmetrical Components and Finite Element Method”, Journal Electromotion, vol. 4, no. 4, pp. 139–145, 1997.
- [9] M. Popescu, T. J. Miller, M. McGilp, G. Strappazzon, N. Traivillin and R. Santarossa, “Asynchronous Performance Analysis of a Single-Phase Capacitor-Start, Capacitor-Run Permanent Magnet Motor”, IEEE Transactions on Energy Conversion, vol. 20, no. 1, pp. 142–150, 2005.
- [10] E. F. Fuchs, A. J. Vandenput, J. Holl and C. White, “Design Analysis of Capacitor-Start, Capacitor-Run Single-Phase Induction Motor”, IEEE Transactions on Energy Conversion, vol. 5, no. 2, pp. 327–336, 1990.
- [11] N. A. Ahmed, “Three Phase Induction Motor Operating from a Single Phase-Supply with Electronically Controlled Capacitor”, Electric Power Systems Research, vol. 73, no. 2, pp. 121–128, 2005.
- [12] A. Leicht and K. Makowski, “Analysis of a Single-Phase Capacitor Motor Operating at Two Frequencies, Archives of Electrical Engineering, vol. 61, no. 2, pp. 251–266, 2012.
- [13] T. Bäck, Evolutionary Algorithms Theory and Pracice, Oxford Univeristy Press, Oxford, 1996.
- [14] D. B. Fogel, Evolutionary Computation: Toward a New Philosophy of Machine Intelligence, Piscataway, NJ, 1995.
- [15] S. Dong-Joon, Ch. Dong-Hyeok, Ch. Jang-Sung and J. Hyun-Kyo, “Efficiency Optimization of Interior Permanent Magnet Synchronous Motor Using Genetic Algorithms”, IEEE Transactions on Magnetics, vol. 33, no. 2, pp. 1880–1883, 1997.
- [16] Keun-young, Yoon and Byung-il Kwon, “Efficiency Improvement for Concentrated Flux IPM Motors for Washing Machines”, Journal of Electrical Engineering Technology, vol. 9, no. 4, pp. 1277–1282, 2014.
- [17] H. Saavedra, J. R. Riba and L. Romeral, “Multi-Objective Optimal Design of a Five-Phase Fault-Tolerant Axial Flux PM Motor”, Advances Electrical and Computer Engineering, vol. 15, no. 1, pp. 69–76, 2015.
- [18] V. Sarac, L. Petkovska, M. Cundev and G. Cvetkovski, “Comparison between two Target Functions for Optimization of Single-Phase Shaded Pole Motor using Method of Genetic Algorithms”, Journal of Materials Processing Technology, vol. 161, no. 1-2, pp. 89–95, 2005.
- [19] R. Campenau and M. Cernat, “Two Speed Single Phase Induction Motor with Electronically Controled Capacitance”, Advances Electrical and Computer Engineering, vol. 14, no. 3, pp. 137–140, 2014.
- [20] The MATLAB compiler user’s guide, Mathworks Handbook, Mathworks, 2005.
- [21] K. Makowski and J. M. Wilk, “Determination of Dynamic Characteristics of the Single Phase Capacitor Induction Motor”, Prezglad Electrotechniczny, vol. 87, no. 5, pp. 231–237, 2011.
- [22] K. Makowski and M. J. Wilk, “Experimental Verification of Field-Circuit Model of a Single-Phase Capacitor Induction Motor”, Prezglad Electrotechniczny, vol. 88, no. 7b, pp. 116–118, 2012.
- [23] S. Masic, J. Corda and S. Smaka, “Computation of Static, Steady-State and Dynamic Characteristics of Switched Reluctance Motor”, Automatika, vol. 43, no. 3-4, pp. 109–117, 2002.
- [24] E. Hüner, M. C. Aküner and U. Demir, “A New Approach Application and Design of Toroidal Axial-Flux Permanent Magnet Open-Slotted NN type”, Tehnički vjesnik, vol. 22, no. 5, pp. 1193–1198, 2015.
- [25] T. Vaimann, A. Belachen and A. Kallase, “Changing the Magnetic Flux Density Distribution a Squirrel-Cage Induction Motor with Broken Bars”, Elektronika ir Elektrotechnika, vol. 20, no. 7, pp. 11–14, 2014.
- [26] Y. Sun and D. Y. Lee, “Numerical Analysis of Single Phase Induction Motors by using Circuit Equations Coupled with Magnetic Field Distribution”, Journal of Magnetic, vol. 18, no. 3, pp. 255–259, 2013.
- [27] V. Hrabovcova and P. Rafajdus, “Radial Magnetic Forces of Single Phase Permanent Split-Capacitor Motor”, Journal of Electrical Engineering, vol. 57, no. 4, pp. 185–192, 2006.