References
- [1] P. S. Safronov, I. V. Bondarenko, O. F. Bondarenko, V. M. Sydorets, and D. V. Kucherenko, “Increase of Electromagnetic Compatibility of Power Supplies for Resistance Welding,” Technical Electrodynamics, no. 5, pp. 89–91, 2014. (in Ukrainian).
- [2] Yu. E. Paerand, Yu. V. Bondarenko, and A. F. Bondarenko, “The reshapers of current impulses for the contact welding,” Tekhnologiya i konstruirovaniye v elektronnoy apparature, no. 3, pp. 25–30, 2008. (in Russian). [Online]. Available: www.tkea.com.ua/tkea/2008/3_2008/st_06.htm
- [3] M. Salem, “Control and Power Supply for Resistance Spot Welding (RSW),” 2011. [Online]. Available: http://ir.lib.uwo.ca/etd/130/
- [4] O. F. Bondarenko, P. S. Safronov, I. V. Bondarenko, and V. M. Sydorets, “Direct energy and energy storage circuit topologies of DC power supplies for micro resistance welding,” 2014 IEEE 34th International Scientific Conference on Electronics and Nanotechnology (ELNANO), Apr. 2014, pp. 468–471. https://doi.org/10.1109/elnano.2014.687343110.1109/elnano.2014.6873431
- [5] C. A. Gallo, F. L. Tofoli, and J. A. Correa Pinto, “Two-Stage Isolated Switch-Mode Power Supply With High Efficiency and High Input Power Factor,” IEEE Transactions on Industrial Electronics, vol. 57, no. 11, pp. 3754–3766, Nov. 2010. https://doi.org/10.1109/tie.2010.204173510.1109/TIE.2010.2041735
- [6] H. Wang, S. Dusmez, and A. Khaligh, “Design considerations for a level-2 on-board PEV charger based on interleaved boost PFC and LLC resonant converters,” 2013 IEEE Transportation Electrification Conference and Expo (ITEC), Jun. 2013, pp. 1–8. https://doi.org/10.1109/itec.2013.657450810.1109/ITEC.2013.6574508
- [7] O. F. Bondarenko, I. V. Bondarenko, P. S. Safronov, and V. M. Sydorets, “Effective circuit topology of DC power supply for micro resistance welding,” 2014 IEEE International Conference on Intelligent Energy and Power Systems (IEPS), Jun. 2014, pp. 68–70. https://doi.org/10.1109/ieps.2014.687420410.1109/IEPS.2014.6874204
- [8] D. Kuzin, T. Khyzhniak, and O. Bondarenko, “Power quality improvement in single-phase power supplies for resistance welding,” 2016 International Conference on Electronics and Information Technology (EIT), May 2016. pp. 30–34. https://doi.org/10.1109/iceait.2016.7500985
- [9] I. V. Bondarenko, “Multicell-type Transistor Converter with Combined Continuous and Pulse Control for Micro Resistance Welding,” PhD thesis, Kyiv, p. 148, 2012. (in Ukrainian).
- [10] B. Singh, B. N. Singh, A. Chandra, K. Al-Haddad, A. Pandey, and D. P. Kothari, “A review of single-phase improved power quality ac~dc converters,” IEEE Transactions on Industrial Electronics, vol. 50, no. 5, pp. 962–981, Oct. 2003. https://doi.org/10.1109/tie.2003.817609
- [11] Product Comparison Matrix – Doc. 3000489.2, Maxwell Technologies Inc. [Online]. Available: http://www.maxwell.com/images/documents/Product_Comparison_Matrix_3000489_2.pdf
- [12] J. Dunia and B. M. M. Mwinyiwiwa, “Performance Comparison between CUK and SEPIC Converters for Maximum Power Point Tracking Using Incremental Conductance Technique in Solar Power Applications,” International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, vol. 7, no. 12, pp. 1638–1643, 2013. [Online]. Available: scholar.waset.org/1999.5/9996707.
- [13] D. S. L. Simonetti, J. Sebastian, F. S. dos Reis, and J. Uceda, “Design criteria for SEPIC and Cuk converters as power factor preregulators in discontinuous conduction mode,” Proceedings of the 1992 International Conference on Industrial Electronics, Control, Instrumentation, and Automation, pp. 283–288. https://doi.org/10.1109/iecon.1992.25461910.1109/iecon.1992.254619
- [14] C. H. Chan and M. H. Pong, “Input current analysis of interleaved boost converters operating in discontinuous-inductor-curent mode,” PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972, vol. 1, pp. 392–398. https://doi.org/10.1109/pesc.1997.61675410.1109/PESC.1997.616754
- [15] H. Nguyen, “Design, Analysis and Implementation of Multiphase Synchronous Buck DC-DC Converter for Transportable Processor,” M.S. thesis, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, 2004, p. 98.
- [16] A. Kolpakov, “Features of thermal calculation of pulse power links,” Komponenty i tehnologii, no. 1, 2002. (in Russian). [Online]. Available: http://www.kit-e.ru/assets/files/pdf/2002_01_46.pdf