CNC Machining Of The Complex Copper Electrodes

Ioan Alexandru Popan; Nicolae Balc; Alina Popan

doi:10.1515/aucts-2015-0045

.blurhash-client-img { display: none !important; }

CNC Machining Of The Complex Copper Electrodes

Acta Universitatis Cibiniensis. Technical Series

Volume 66 (2015): Issue 1 (July 2015)

By: Ioan Alexandru Popan, Nicolae Balc and Alina Popan

Open Access

|Sep 2015

Abstract

This paper presents the machining process of the complex copper electrodes. Machining of the complex shapes in copper is difficult because this material is soft and sticky. This research presents the main steps for processing those copper electrodes at a high dimensional accuracy and a good surface quality. Special tooling solutions are required for this machining process and optimal process parameters have been found for the accurate CNC equipment, using smart CAD/CAM software.

References

[1] Mohsen Soori, Behrooz Arezoo Mohsen Habibi, Dimensional and geometrical errors of three-axis CNC milling machines in a virtual machining system, Computer-Aided DesignVolume 45, Issue 11, November 2013, Pages 1306–1313.10.1016/j.cad.2013.06.002
Search in Google Scholar
[2] Tzeng Yih-Fong, Jean Ming-Der, Dimensional quality optimisation of high-speed CNC milling process with dynamic quality characteristic; Robotics and Computer-Integrated Manufacturing, Volume 21, Issue 6, December 2005, Pages 506–517.10.1016/j.rcim.2004.07.014
Search in Google Scholar
[3] J. Józwik, I. Kuric, S. D. Grozav, V. A. Ceclan, “R-Test dynamic measurement of 5-axis CNC machining centre rotary axis kinematic centre error” 2014 International Conference on Production Research - Europe, Africa and Middle East, 3rd International Conference on Quality and Innovation in Engineering and Management, pag. 287-292, July 1-5, 2014, Cluj-Napoca, Romania, ISBN: 978-973-662-978-5.
Search in Google Scholar
[4] Chih-Ching Lo, CNC machine tool surface interpolator for ball-end milling of free-form surfaces; International Journal of Machine Tools and Manufacture, Volume 40, Issue 3, February 2000, Pages 307–326;10.1016/S0890-6955(99)00071-1
Search in Google Scholar
[5] W.L. Feng, X.D. Yao, Arynov Azamat, J.G. Yang, Straightness error compensation for large CNC gantry type milling centers based on B-spline curves modeling; International Journal of Machine Tools and Manufacture, Volume 88, January 2015, Pages 165–174.10.1016/j.ijmachtools.2014.09.006
Search in Google Scholar
[6] www.mitsubishi.com
Search in Google Scholar
[7] V. Bulej, J. Uríček, V. Poppeova, R. Zahoranský, M. Rupikova, “Study of the Workspace of Hybrid Mechanism Trivariant”, Applied Mechanics and Materials, Vol 436, pp. 366-373, October, 2013.10.4028/www.scientific.net/AMM.436.366
Search in Google Scholar
[8] www.mstar.ro.
Search in Google Scholar
[9] Ivan Kuric, Matúš Košinár, Miroslav Cisár, Measurement and analysis of CNC machine tool accuracy in different location on work table; Proceedings in Manufacturing Systems, Volume 7, Issue 4, 2012;
Search in Google Scholar
[10] L. Morovič, P. Pokorný, “Optical 3D Scanning of Small Parts”, Advanced Materials Research, Vol. 468-471, pp. 2269-2273, February, 201210.4028/www.scientific.net/AMR.468-471.2269
Search in Google Scholar
[11] www.mitsubishicarbide.com
Search in Google Scholar
[12] Alexandru, Carean; Nicolae, Balc; Razvan, Curta, Researches on machining of complex parts on CNC turning centres with milling capabilities, Academic Journal of Manufacturing Engineering, VOL.7, Issue 3/2009, pg. 78-83, ISSN: 1583-7904.
Search in Google Scholar
[13] G. Królczyk, M. Gajek, S. Legutko, Effect of the cutting parameters impact on tool life in duplex stainless steel turning process, Tehnicki Vjesnik-Technical Gazette 20 (4), 587-592
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.1515/aucts-2015-0045 | Journal eISSN: 2668-6449 | Journal ISSN: 1583-7149

Journal RSS Feed

Language: English

Page range: 153 - 158

Published on: Sep 23, 2015

Published by: Lucian Blaga University of Sibiu

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

CAD/CAM,

CNC machining,

3D complex copper electrodes

Related subjects:

Engineering,

Electrical engineering,

Automation,

Mechanical engineering,

Production technology,

Process engineering and industrial engineering

© 2015 Ioan Alexandru Popan, Nicolae Balc, Alina Popan, published by Lucian Blaga University of Sibiu
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 66 (2015): Issue 1 (July 2015)