References
- BRUE, G. - HOWES, R. 2005. Six Sigma: the MacGraw-Hill 36 hours course. New York: McGraw-Hill Companies Inc., 520 pp. ISBN 9780071446020.
- GARRIDO-VEGA, P. - SACRISTÁN-DIÁZ, M. - MAGANA-RAMÍREZ, L. M. 2016. Six Sigma in SMEs with low production volumes. A successful experience in aeronautics. In Universia Business Review, no. 51, pp. 51-71. (In Spanish: Seis Sigma en PYMES con bajo volumen de producción. Una experiencia de éxito en aeronáutica).
- Garza-Reyes , J. A. - Oraifige , I. - Soriano-Meier, H. - Harmanto , D. - Rocha-Lona, L. 2010. An empirical application of Six Sigma and DMAIC methodology for business process improvement. In International Conference on Flexible Automation and Intelligent Manufacturing 2010. Oakland, California: FAIM, pp. 92-100. ISBN 9781617827143.
- GIJO, E. V. - RAO, T. S. 2005. Six Sigma implementation - Hurdles and more hurdles. In Total Quality Management and Business Excellence, vol. 16, no. 6, pp. 721-725.10.1080/14783360500077542
- GIJO, E. V. - SCARIA, J. 2013. Process improvement through Six Sigma with Beta correction: a case study of manufacturing company. In The International Journal of Advanced Manufacturing Technology, vol. 71, no. 1, pp. 717-730.
- INGALDI, M. - KOTUS, M. - Lestyánszka -Škůrková , K. 2016. Using 3x3 matrix to evaluate the manufacturing technology in food company. In Acta Technologica Agriculturae, vol. 19, no. 2, pp. 52-56.
- Jirasukpraser T, P. - GARZA-REYES, J. A. - KUMAR, V. - LIM, M. K. 2014. A Six Sigma and DMAIC application for the reduction of defects in a rubber gloves manufacturing process. In International Journal of Lean Six Sigma, vol. 5, no. 1, pp. 2-21.
- Jirasukpraser T, P. - GARZA-REYES, J. A. - SORIANO-MEYER, H. - ROCHA-LONA, L. 2012. A case study of defects reduction in a rubber gloves manufacturing process by applying Six Sigma principles and DMAIC problem solving methodology. In International Conference on Industrial Engineering and Operations Management 2012. Istanbul: Industrial Engineering and Operations Management Society, pp. 472-481. ISBN 9780985549701.
- Omachonu , V. K. - ROSS, J. E. 2004. Principles of Total Quality. Florida: CRC Press, 512 pp. ISBN 9781574443264.
- PATIL, S. D. - Ganganallimath , M. M. - MATH, R. B. - KARIGAR, Y. 2015. Application of Six Sigma method to reduce defects in green sand casting process: A case study. In International Journal on Recent Technologies in Mechanical and Electrical Engineering, vol. 2, no. 6, pp. 37-42.
- PICA, S. 2011. DMAIC and its Contribution to the Area of Process Quality Improvement within the Six Sigma Method. Master Thesis. Košice: Technical University of Košice, 83 pp. (In Slovak: DMAIC a jeho prínos v oblasti zlepšovania kvality procesov v rámci metodiky Six Sigma).
- PRÍSTAVKA, M. - KOTOROVÁ, M. - SAVOV, R. 2016. Quality control in production processes. In Acta Technologica Agriculturae, vol. 19, no. 3, pp. 77-83.
- Pyzdek, T. - Keller, P. A. 2010. The Six Sigma Handbook: A complete guide for greenbelts, black belts, and managers at all levels. New York: McGraw-Hill Companies Inc., 548 pp. ISBN 9780071623377.
- RUSINKO, Ľ. - HOVANEC, M. 2011. Continuous improvement of quality management system to operate with ergonomics. In International Conference on Quality and Reliability of Technical Systems 2011. Košice: Technical University of Košice, pp. 251-255. ISBN 9788055306124. (In Slovak: Neustále zlepšovanie systému manažérstva kvality v súčinnosti s ergonómiou).
- TEPLICKÁ, K. - ČULKOVÁ, K. - ŽELEZNÍK, O. 2015. Application of Bayess principle optimum - optimization model for managerial decision and continual improvement. In Polish Journal of Management Studies, vol. 12, no. 2, pp. 170-178.
- THAKORE, R. - DAVE, R. - PARSANA, T. - SOLANKI, A. 2014. A review: Six Sigma implementation practice in manufacturing industries. In International Journal of Engineering Research and Applications, vol. 4, no. 1, pp. 63-69.