References
- AKCHURIN, A. – BOSMAN, R. – LUGT, P. M. – DROGEN, M. 2016. Analysis of wear particles formed in boundary-lubricated sliding contacts. In Tribology Letter, vol. 63, 14 pp.
- BARON, P. – KOČIŠKO, M. – DOBRÁNSKY, J. – POLLÁK, M. – CMOREJ, T. 2015. Research and correlation of diagnostic methods for assessment of the state of oil filling in cycloid gearbox. In Advances in Materials Science and Engineering, vol. 24, pp. 1–9.
- DAY, M. J. – RINKINEN, J. 1997. Contaminant monitoring of hydraulic systems – The need for reliable data. In Proceedings of the 10th International Congress of Condition Monitoring and Diagnostic Engineering Management 1, pp. 171–182.
- HÖNIG, V. – ORSÁK, M. 2016. Wear of engine oils using gaseous fuel. In Manufacturing Technology, vol. 16, no. 5, pp. 923–927.
- KALIN, M. – MAJDIČ, F. – VIŽITIN, J. – PEZDIRNIK, J. – VELKAVRH, I. 2008. Analyses of the long-term performance and tribological behavior of an axial piston pump using diamondlike-carbon-coated piston shoes and biodegradable oil. In Journal of Tribology, vol. 130, no. 1, pp. 011013–011020.
- KOSIBA, J. – ČORŇÁK, Š. – GLOS, J. – JABLONICKÝ, J. – VOZÁROVÁ, V. – PETROVIĆ, A. – CSILLAG, J. 2016. Monitoring oil degradation during operating tests. In Agronomy Research, vol. 14, no. 5, pp. 1626–1634.
- KOWANDY, C. – RICHARD, C. – CHEN, Y. M. 2008. Characterization of wear particles for comprehension of wear mechanisms. Case of PTFE against cast iron. In Wear, vol. 265, pp. 1714–1719.
- KUČERA, M. – ALEŠ, Z. – PEXA, M. 2016. Detection and characterization of wear particles of universal tractor oil using a particles size analyzer. In Agronomy Research, vol. 14, no. 4, pp. 1351–1359.
- KUMBÁR, V. – DOSTÁL, P. 2013. Oil additive and its effect. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 61, no. 3, pp. 691–697.
- LAGHARI, M. S. 2003. Recognition of texture types of wear particles. In Neutral Computing & Applications, vol. 12, pp. 18–25.
- LEVI, O. – ELIAZ, N. 2009. Failure analysis and condition monitoring of an open-loop oil system using ferrography. In Tribology Letter, vol. 36, pp. 17–29.
- LIU, H. – WEI, H. – WEI, L. – LI, J. – YANG, Z. 2016. The segmentation of wear particles images using J-segmentation algorithm. In Advances in Tribology, 10 pp.
- MACHALÍK, S. 2011. Image analysis in tribodiagnostics. In Information Sciences and Technologies Bulletin of the ACM Slovakia, vol. 3, no. 4, pp. 23–27.
- MAJDAN, R. – TKÁČ, Z. – STANČÍK, B. – ABRAHÁM, R. – ŠTULAJTER, I. – ŠEVČÍK, P. – RAŠO, M. 2014. Elimination of ecological fluids contamination in agricultural tractors. In Research in Agricultural Engineering, vol. 60, pp. 9–15.
- MENDOZA, G. – IGARTUA, A. – FERNANDEZ–DIAZ, B. – URQUIOLA, F. – VIVANCO, S. – ARGUIZONIZ, R. 2011. Vegetable oils as hydraulic fluids for agricultural applications. In Grasas y Aceites, vol. 62, no. 1, pp. 29–38.
- MIHALČOVÁ, J. – RIMÁR, M. 2015. Control of activity of aircraft engines by analysis of wear debris particles in terms of shape and size. In International Journal of Engineering Research in Africa, vol. 18, pp. 136–143.
- MICHAEL, P. W. – WANKE, T. S. – MCCAMBRIDGE, M. – TUNG, S. – KINKER, B. – WOYDT, M. – DEAN, S. W. 2007. Additive and base oil effects in automatic particle counters. In ASTM International, vol. 4, no. 4.
- MÜLLER, M. – LEBEDEV, A. – SVOBODOVÁ, J. – NÁPRSTKOVÁ, N. – LEBEDEV, P. 2014. Abrasive-free ultrasonic finishing of metals. In Manufacturing Technology, vol. 14, no. 3, pp. 366–370.
- NG, F. – HARDING, J. A. – GLASS, J. 2017. Improving hydraulic excavator performance through in line hydraulic oil contamination monitoring. In Mechanical Systems and Signal Processing, vol. 83, pp. 176–193.
- PAVLŮ, J. – HÖNIG, V. – ALEŠ, Z. – CHOTĚBORSKÝ, R. 2016. Tribodiagnostic analysis of motor oil after failure of turbocharger of combustion engine. In Manufacturing Technology, vol. 16, no. 5, pp. 1115–1122.
- PENG, Y. – WU, T. – WANG, S. – KWOK, N. M. – PENG, Z. 2015. Motion-blurred particle image restoration for on-line wear monitoring. In Sensors, vol. 15, no. 4, pp. 8173–8191.
- PERIĆ, S. – NEDIĆ, B. – TRIFKOVIĆ, D. – VURUNA, M. 2013. An experimental study of the tribological characteristics of engine and gear transmission oils. In Strojniškivestnik – Journal of Mechanical Engineering, vol. 59, pp. 443–450.
- PODSIADLO, P. – STACHOWIAK, G. W. 2012. Directional multiscale analysis and optimization for surface textures. In Tribology Letters, vol. 49, no. 1, pp. 179–191.
- PROLIĆ, T. Ć. – FELJA, M. – GRAHOVAC, R. P. – LEPUŠIĆ, A. 2015. Impact of viscosity modifiers on formulation of universal gear tractor oil (UTTO) SAE 10W-30. In Gorivaa i Maziva, vol. 54, no. 3, pp. 257–270.
- RAADNUI, S. 2005. Wear particle analysis – utilization of quantitative computer image analysis: A review. In Tribology International, vol. 38, pp. 871–878.10.1016/j.triboint.2005.03.013
- SEJKOROVÁ, M. – GLOS, J. 2017. Analysis of degradation of motor oils used in Zetor tractors. In Acta Univeritatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 65, no.1, pp. 179–187.
- STACHOWIAK, G. P. – STACHOWIAK, G. W. – PODSIADLO, P. 2008. Automated classification of wear particles based on their surface texture and shape features. In Tribology International, vol. 41, pp. 34–43.10.1016/j.triboint.2007.04.004
- STOJILKOVIĆ, M. – KOLB, M. 2016. Tribological properties of biodegradable universal tractor transmission oil. In Tribology in Industry, vol. 38, no. 2, pp. 229–234.
- TKÁČ, Z. – HUJO, Ľ. – TULÍK, J. – KOSIBA, J. – UHRINOVÁ, D. – ŠINSKÝ, V. 2014. Greening of agricultural and forestry tractors. In Acta Universitatis Agriculturae et Silviculturae Mendelianae, vol. 62, no. 5, pp. 1135–1139.
- TÓTH, F. – RUSNÁK, J. – KADNÁR, M. – ČAVOJSKÝ, P. 2014. Effect of selected ecological lubricants on the wear of defined sliding bearing. In Acta Technologica Agriculturae, vol. 17, no. 1, pp. 13–16.
- TUCKER, J. E. – REINTJES, J. – DUNCAN, M. D. – MCCLELLAND, T. L. – TANKERSLEY, L. L. – SCHULTZ, A. – LU, C. – HOWARD, P. L. – SEBOK, T. HOLLOWAY, C. – FOCKLER, S. 1998. LaserNet Fines optical oil debris monitor. In Joint Oil Analysis Program International Condition Monitoring Conference.
- TULÍK, J. – KOSIBA, J. – STANČÍK, B. – ŠTULAJTER, I. 2014. Pollution analysis of new synthetic biodegradable fluid during durability test of hydrostatic pump. In Acta Technologica Agriculturae, vol. 17, no.1, pp. 24–28.
- TULÍK, J. – KOSIBA, J. – VARGA, F. – BUREŠ, Ľ. – ŠINSKÝ, V. 2013. Analysis of synthetic oil samples during an operating test. In Acta Technologica Agriculturae, vol. 16, no.1, pp. 22–25.
- VALACH, M. – MAREČEK, J. – HLAVÁČOVÁ, Z. – TRÁVNIČEK, P. – GLOS, J. 2013. Determination of impurities in biofuels with use of particle size analyser. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 61, pp. 813–817.
- VÄHÄOJA, P. O. – PIKKARAINEN, H. V. S. 2011. Trends in industrial oil analysis – a review. In International Journal of Condition Monitoring, vol. 1, no. 1, pp. 4–10.
- WÄSCHE, R. – HARTELT, M. – HODOROABA, V. 2015. Analysis of nanoscale wear particles from lubricated steel–steel contacts. In Tribology Letters, vol. 58, p. 49.
- WU, T. – PENG.Y. – WANG, S. – CHEN, F. – KWOK, N. – PENG, Z. 2016. Morphological feature extraction based on multi-view images for wear debris analysis in on-line oil monitoring. In Tribology Transactions, vol. 59, pp. 1–11.