References
- ALTHOUSE, A. D. – TURNQUIST, C. H. – BRACCIANO, A. F. 2004. Modern refrigeration and air conditioning. 18th ed. Tinley Park, IL : Goodheart-Wilcox Company Inc, 2004.
- DANFOSS A/S. 2005. Bellows 077B. Nordborg : Danfoss A/S, 2005.
- DANFOSS A/S. 2013. Instruction for calculation, assembly, adjustment and control of 077B. Nordborg : Danfoss A/S, 2013.
- FARAJI, G. – MASHADI, M. M. – NOROUZIFARD, V. 2009. Evaluation of effective parameters in metal bellows forming process. In Journal of Materials Processing Technology, vol. 209, 2009, no. 7, pp. 3431–3437.
- KUČERA, M. – CHOTĚBORSKÝ, R. 2013. Analysis of the process of abrasive wear under experimental conditions. In Scientia Agriculturae Bohemica, vol. 44, 2013, pp. 102–106.
- LEE, S. W. 2002. Study on the forming of the metal bellows. In Journal of Materials Processing Technology, vol. 130, 2002, pp. 47–53.
- MAJDAN, R. – TKÁČ, Z. – TULÍK, J. – VOZÁROVÁ, V. – CHRASTINA, J. – ŠIMOR, R. – KOSIBA, J. 2010. The methods for smart inspection of biodegradable transmission oil of tractor (Metode za brzu kontrolu ekološkog transmisionog ulja traktora). In Savremena Poljoprivredna Tehnika, vol. 36, 2010, pp. 276–284.
- SIGMA-NETICS. 2015. Technical resources: White papers: Designing with metal bellows. [Online]. Available at: http://www.sigmanetics.com/technical-resources/white-papers [Accessed 8 January 2016].
- TÓTH, F. – RUSNÁK, J. – KADNÁR, M. – ČAVOJSKÝ, P. 2014. Effect of selected ecological lubricants on the wear of defined sliding bearing. In Acta Technologica Agriculturae, vol. 17, 2014, no. 1, pp. 13–16.
- TÖKÖLY, P. – BOŠANSKÝ, M. – MALÝ, V. 2013. Metodika opredelenija zakalennogo sloja v nezvoľventnom zubčatom zeceplenii. In Visnik Nacionaľnovo Techničnovo Universitetu “XIII”, vol. 41, 2013, pp. 148–153.
- WITZENMANN. 2015. Downloads: 0441 Metal bellows manual. [Online]. Available at: http://www.witzenmann.sk/sk/downloads/brochure.cmd [Accessed 8 January 2016].