References
- 1. Brinksmeire E. (2006), Advances in modeling and simulation of grinding processes, Annals of the CIRP, 55,667-696.
- 2. Chae J., Park S.S., Freiheit T. (2006), Investigation of micro-cutting operations. International Journal of Machine Tools & Manufacture, 46,313-332.
- 3. Chang, H.-C., Junz Wang, J.-J.(2008), A stochastic grinding force model considering random grit distribution, International Journal of Machine Tools & Manufacture, 48, 1335-1344.
- 4. Chee Keong Ng, Shreyes N. Melkote, M. Rahman, A. Senthil Kumar.(2006), Experimental study of micro- and nano-scale cutting of aluminum 7075-T6, International Journal of Machine Tools & Manufacture, 46, 929-936.
- 5. Chen M., Li X., Yang, P. (2007), Study on surface grinding-hardening of SKD11 hardened steel, International Journal of Manufacturing Technology and Management, 12, 236-245.
- 6. Hecker Rogelio L. (2007), Grinding force and power modeling based on chip thickness analysis, International Journal of Advanced Manufacturing Technology, 33, 449-459.
- 7. Heinzel C., Bleil N. (2007), The use of the size effect in grinding for work-hardening. Annals of the CIRP, 56, 327-330.
- 8. Kalchenko V.V., Yeroshenko A.M. (2009), Determination of the efficiency of grinding with crossed axes tool and workpiece with a circular profile, Journal of The National Technical University ‘Kharkiv Polytechnic Institute’, technologies.– Kharkiv, 1, 52-56.
- 9. Kalchenko V.I., Kalchenko V.V., Pohiba N.N. (2012), Determination of cutting forces in the process of deep grinding surfaces of rotation by oriented elbor wheel, Journal “Super hard materials, 2, 58-73.
- 10. Lan Yan, Xuekun Li, Feng Jiang, Zhixiong Zhou, Yiming (Kevin) Rong.(2009), Research on microscopic grain-workpiece interaction in grinding, Part 2 – Factorial Analysis. Advanced Materials Research, 76-78, 15-20.
- 11. Malkin S., Guo C. (2008), Grinding technology – Theory and applications of machining with abrasives, New York: Industrial Press.
- 12. Nguyen, T. A., Butler, D. L. (2005), Simulation of precision grinding process, part 1: generation of the grinding wheel surface, International Journal of Machine Tools & Manufacture, 45,1321-1328.
- 13. Oliveira, J.F.G. (2009), Industrial challenges in grinding, Annals of the CIRP,1-18.
- 14. Stepien P. (2007), Grinding forces in regular surface texture generation, International Journal of Machine Tools & Manufacture, 47, 2098-2110.
- 15. Yeroshenko A.M. (2008), Theoretical and experimental studies of the grinding process with crossed axes tool and the part of the profile curves in a circle, Journal of Chernihiv State Technological University, 35,5-24.
- 16. Yeroshenko A.M. (2009), Increase of efficiency of polishing with the crossing axes of instrument and detail with a type as the arc of circumference, The thesis for a scientific degree in specialty – machining processes, machines and tool, National Technical University.