References
- 1. Bokov V.B. (2011), Pneumatic gauge steady-statemodelling by theoretical and empirical methods, Measurement, 44, 303-311.
- 2. Breitinger R. (1971), New Pneumatic Measuring Gauges, Fertigungtechnik, 61, 225–227, (in German)
- 3. Crnojevic C, Roy G, Bettahar A, Florent P. (1997), The Influence of the Regulator Diameter and Injection Nozzle Geometry on the Flow Structure in Pneumatic Dimensional Control Systems, Journal of Fluids Engineering, 119, 609–615.
- 4. Dejč M.E. (1961), Technical, Gosènergoizdat, Moskva–Leningrad, (in Russian)
- 5. Idel’čik I.E. (1960), Hydraulic Resistances Directory, Gosènergoizdat, Moskva, (in Russian)
- 6. Jermak Cz.J, Rucki M. (2016) Dynamics of the non-contac troundness measurement with air gages, Acta Mechanica et Automatica, 10(3), 227-232.
- 7. Jermak Cz.J. (2010), Methods of Shaping the Metrological Characteristics of Air Gages, Journal of Mechanical Engineering, 56(6), 385-390.
- 8. Jermak Cz.J. (2012), Theoretical and Practical Aspects of Shaping of Static Metrological Properties of Length Air Gauges Wyd. Politechniki Poznańskiej, Seria Rozprawy, nr 476, (in Polish)
- 9. Jermak Cz.J., Rucki M. (2012), Air Gauging: Static and Dynamic Characteristics, IFSA, Barcelona.
- 10. Kazimierski Z., Krysiński J. (1981), Gas Bearing Arrangement and Microturbine Drives, WNT, Warszawa, (in Polish)
- 11. Lammel L., Osiadacz A. (1974), Pneumatic Signals in Automation, WNT, Warszawa, (in Polish)
- 12. Lotze W. (1971), Design of Pneumatic Air Gauges, Feingerätetechnik, 29(9), 389–394, (in German)
- 13. Minaev A.N. (1987), Mechanics of Liquid and Gas, Metallurgiâ, Moskva, (in Russian)
- 14. Oleśkiewicz-Popiel Cz. (1981), Axial-symmetric Free and Striking Stream, Wyd. Politechniki Poznańskiej, Poznań. (in Polish)
- 15. Project Report (2001), Design of Metodology of Improving of Properties of Pneumatic Lenght-measurement Gauges. Project Report KBN 1253/T07/00/18. (in Polish)
- 16. Prosnak W.J. (1971), Fluid Mechanics – Gas Dynamics, t. 2, PWN, Warszawa, (in Polish)
- 17. Rucki M. (2009), Reduction of Uncertainty in Air Gauge Adjustment Process, IEEE Transactions on Instrumentation and Measurement, 58(1), 52-57.
- 18. Schuetz G. (2015), Pushing the Limits of Air Gaging—And Keeping Them There, Quality Magazine, 54(7), 22-26.
- 19. Tanner C.J. (1958), Air gauging – history and future developments, Institution of Production Engineers Journal, 37(7), 448-462.
- 20. Theory of Pneumatic Sensors Integrated with Piezoceramical Pressure Transducer (1986-1990), Annual Research Report.CPBP 02.20, Nr III.02, Poznań–Warszawa. (in Polish)
- 21. Tesar V. (2008), Characterisation of subsonic axisymmetric nozzles, Chemical Engineering Research and Design, 86, 1253–1262.
- 22. Tesar V. (2010), Characterisation of inexpensive, simplyshaped nozzles, Chemical Engineering Research and Design, 88, 1433-1444.
- 23. Vacharanukul K., Mekid S. (2005), In-Process Dimensional Inspection Sensors, Measurement, 38(3), 204-218.
- 24. Zalmanzon L.A. (1961), Flowing Elements of Pneumatic Control Appliances, Izd. Akademii Nauk SSSR, Moskva. (in Russian)
- 25. Zelczak A. (2002), Pneumatic Length Measurements, WKŁ, Warszawa, (in Polish)