References
- 1. Boger R.K., Wagoner, R.H., Barlat F., Lee M.G., Chung K. (2005), Continous, large strain, tension/compression testing of sheet material, International Journal of Plasticity, 21, 2319–2343.10.1016/j.ijplas.2004.12.002
- 2. Bruschi S., Altan T., Banabic D., Bariani P.F., Brosius A., Cao J., Tekkaya A. E. (2014), Testing and modelling of material behaviour and formability in sheet metal forming, CIRP Annals-Manufacturing Technology, 63(2), 727–749.10.1016/j.cirp.2014.05.005
- 3. Cao J., Lee W., Cheng H.S., Seniw M., Wang H., Chung K. (2009), Experimental and numerical investigation of combined isotropic-kinematic hardening behavior of sheet metals, International Journal of Plasticity, 25, 942-972.10.1016/j.ijplas.2008.04.007
- 4. Chongthairungruang B., Uthaisangsuk V., Suranuntchai S., Jirathearanat S. (2013), Springback prediction in sheet metal forming of high strength steels, Materials & Design, 50, 253-266.10.1016/j.matdes.2013.02.060
- 5. Eggertsen P., Mattiasson K. (2010), On constitutive modeling for springback analysis, International Journal of Mechanical Sciences, 52(6), 804–818.10.1016/j.ijmecsci.2010.01.008
- 6. Kim J.H., Kim D., Barlat F., Lee M. (2012) Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels. Materials Science and Engineering: A, 539, 259–270.10.1016/j.msea.2012.01.092
- 7. Kuwabara T., Kumano Y., Ziegelheim J., Kurosaki I. (2009), Tension–compression asymmetry of phosphor bronze for electronic parts and its effect on bending behavior, International Journal of Plasticity, 25(9), 1759–1776.10.1016/j.ijplas.2009.01.004
- 8. Lemoine X., Durrenberger L., Zhu H., Kergen R. (2011), Mixed hardening models: parameters identification on AHSS steels, IDDRG Conference Proceedings.
- 9. Mahmoudi A.H., Pezeshki-Najafabadi, S.M., Badnava, H. (2011), Parameter determination of Chaboche kinematic hardening model using a multi objective Genetic Algorithm, Computational Materials Science, 50, 1114-1122.10.1016/j.commatsci.2010.11.010
- 10. Piao K., Lee J.K., Kim J.H., Kim H.Y., Chung K., Barlat F., Wagoner R.H. (2012), A sheet tension/compression test for elevated temperature, International Journal of Plasticity, 38, 27-49.10.1016/j.ijplas.2012.03.009
- 11. Shi M., Zhu X., Xia C., Stoughton T. (2008) Determination of nonlinear isotropic/kinematic hardening constitutive parameters for AHSS using tension and compression tests, Numisheet Conference, 137–142.
- 12. Silvestre E., Mendiguren J., Galdos L., Sáenz de Andragona E. (2015), Comparison of the hardening behaviour of different steel families: From mild and stainless steel to advanced high strength steels, International Journal of Mechanical Sciences, 101-102, 10-20.10.1016/j.ijmecsci.2015.07.013
- 13. Slota J., Jurčišin M., Spišák E. (2012), Numerical and experimental springback determination of sheet metals in an air bending process, Acta Metallurgica Slovaca, 18(4), 200-209.
- 14. Slota J., Jurčišin M., Spišák E., Sleziak, T. (2014), An investigation of springback in sheet metal forming of high strength steels, Applied Mechanics and Materials, 693, 370-375.10.4028/www.scientific.net/AMM.693.370
- 15. Wagoner R.H., Lim H., Lee M.G. (2013), Advanced issue on springback, International Journal of Plasticity, 45, 3-20.10.1016/j.ijplas.2012.08.006
- 16. Yoshida, F., Uemori, T. (2002), A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation, International Journal of Plasticity,18, 661–686.10.1016/S0749-6419(01)00050-X
- 17. Yoshida, F., Uemori, T. (2003), A model of large-strain cyclic plasticity and its application to springback simulation, International Journal of Mechanical Sciences, 45(10), 1687–1702.10.1016/j.ijmecsci.2003.10.013