References
- 1. Ankarali A., Mecitoğlu Z., Diken H. (2012), Response spectrum of a coupled flexible shaft-flexible beam system for cycloidal input motion, Mechanism and Machine Theory, 47, 89–102.
- 2. Baworski A., Garbala K., Czech P., Witaszek K. (2015), Estimation of the Ability to Use a Mass of Air from a Moving Vehicle in Wind Turbine Propulsion, Scientific Journal of Silesian University of Technology, Series Transport, 88, 5-17.
- 3. Binglin L., Huajiang O., Wanyou L., Zhijun S., Gang W. (2016), An indirect torsional vibration receptance measurement method for shaft structures, Journal of Sound and Vibration, 372, 11–30.
- 4. Bingzhao G., Hong C., Haiyan Z., and Kazushi S. (2010), A Reduced-Order Nonlinear Clutch Pressure Observer for Automatic Transmission, IEEE Transactions on Control Systems Technology. 18(2), 446 – 453.
- 5. Böhmer J. (1983), Use of Vulkan Flexible Couplings with linear and progressive torsional load characteristic, MTZ, 44/5 (in German),
- 6. Bolek A., Krejčí V. (1967), Shaft Couplings. Praha, SNTL (in Czech).
- 7. Bulut G. (2014) Dynamic stability analysis of torsional vibrations of a shaft system connected by a Hooke’s joint through a continuous system model, Journal of Sound and Vibration, 333(16), 3691–3701.
- 8. Curà F., Mura A. (2013), Experimental procedure for the evaluation of tooth stiffness in spline coupling including angular misalignment, Mechanical Systems and Signal Processing, 40, 545–555.
- 9. Czech P. (2012), Diagnosis of industrial gearboxes condition by vibration and time-frequency, scale-frequency, frequency-frequency analysis, Metalurgija, 51(4), 521–524
- 10. Czech P. (2013), Intelligent approach to valve clearance diagnostic in cars, Activities of Transport Telematics, 395, 384–391.
- 11. Czech P., Szyma B., Juzek M., Kałuża R. (2016), Braking process of sports motorbike, Acta Mechanica Slovaca, 20(2), 22–31.
- 12. El-Sayed A. T., Bauomy H. S. (2015), Passive and active controlers for suppressing the torsional vibration of multiple-degree-of-freedom system, Journal of Vibration and Control, 21(13), 2616–2632.
- 13. Folęga P., Wojnar G., Czech P. (2014), Influence of housing ribbing modification on frequencies and shapes of vibrations, Scientific Journal of Silesian University of Technology. Series Transport, 82, 81-86 (in Polish).
- 14. Gao W., Hao Z. (2010), Active control and simulation test study on torsional vibration of large turbo-generator rotor shaft, Mechanism and Machine Theory, 45, 1326 – 1336.
- 15. Genta G., Festini A., Delepine X. (2008), From Oil to magnetic fields: active and passive vibration control, Acta Mechanica et Automatica, 2(2), 11-20.
- 16. Grega R., Homišin J., Puškár M., Kuľka J., Petróci J., Konečný B., Kršák B. (2015), The chances for reduction of vibrations in mechanical system with low-emission ships combustion engines, International Journal of Maritime Engineering, 157(A4), 235-240.
- 17. Homišin J. (1986a), Pneumatic flexible shaft coupling with damping, Patent No. 252034, (in Slovak).
- 18. Homišin J. (1986b), Pneumatic flexible shaft coupling, Patent No. 254180, (in Slovak).
- 19. Homišin J. (1995a), Pneumatic Flexible shaft coupling with autoregulation ability, Patent No. 278025, (in Slovak).
- 20. Homišin J. (1996a), Contribution to a static optimalization of torsionaly oscillating mechanical systems, The shock and vibration digest, USA, 28/6, 86.
- 21. Homišin J. (1996b), Pneumatic coupling with auxiliary controller of constant twist angle, Patent No. 278272. (in Slovak).
- 22. Homišin J. (2002a), Axial pneumatic flexible shaft coupling, IPO SK Banská Bystrica, Patent No 275867, (in Slovak).
- 23. Homišin J. (2002b), New types of flexible shaft couplings, development – research – application, Vienala, Košice.
- 24. Homišin J. (2008), Tuning methods of torsional oscillating mechanical systems by pneumatic couplings, ATH, Bielsko-Biała, (In Polish).
- 25. Homišin J. (2016), Pneumatic flaxible axial shaft coupling, IPO SK Banská Bystrica, Patent No 288340, (in Slovak).
- 26. Homišin, J. (1995b), Shafft coupling with pneumatic-flexible units, IPO SK Banská Bystrica, Patent No 278024, (in Slovak).
- 27. Homišin, J. (1998), Pneumatic shaft coupling with flexible-damping units, IPO SK Banská Bystrica, Patent No 278750 (in Slovak).
- 28. James D., Van de Ven, Cusack J. (2014). Synthesis and baseline testing of a digital pulse-width-modulated clutch, Mechanism and Machine Theory, 78, 81–91.
- 29. Konieczny L. et al. (2015), Determination of the effect of tire stiffness on wheel accelerations by the forced vibration test method, Journal of Vibroengineering, 17(8), 4469-4477.
- 30. Krejčíř O. (1986), Pneumatic vibroisolation – dissertation thesis, Liberec (in Czech).
- 31. Lacko P. (1971), Flexible shaft coupling as absorber of torsional vibrations, Strojírenství, 9, 71-74 (in Slovak).
- 32. Łazarz B., Wojnar G., Madej H., Czech P. (2009), Evaluation of gear power losses from experimental test data and analytical methods, Mechanika, 80(6), 56-63.
- 33. Łazarz B., Wojnar G., Czech P. (2011), Early fault detection of toothed gear in exploitation conditions, Maintenance and Reliability, 49(1), 68-77.
- 34. Lunke M., Beeftink G. B. (1983), Use of highly flexible couplings in energy-saving marine propulsion systems, Schiff und Hafen, 4/35, (in German).
- 35. Madej, H., Czech, P. (2009), Diagnostics of clearance in the piston-cylinder assembly using Hoelder coefficient, Diagnostyka, 1(49), 73-78.
- 36. Madej, H., Czech, P. (2009), Industrial gearboxes diagnosis by used higher order spectrum, Scientific Journal of Silesian University of Technology. Series Transport, 65, 51-56.
- 37. Pešík L., Němeček P. (1997), Identification of the dynamic system of a machine with an elastic base, McNU 97, Chicago, USA.
- 38. Polyakov V.S. (1979), Coupling guid, Leningrad, Mashinostrojenie, (in Russian).
- 39. Rosół M., Sapiński B. (2014), Autonomous Control System for a Squeeze Mode MR vibration isolator in an automotive engine mount, Acta Mechanica et Automatica, 8(3), 121–124.
- 40. Singiresu S. R. (1996), Engineering optimization theory and practice third edition, New York, John Wiley & Sons, Inc.
- 41. Spruogis B., Turla V. (2006), A damper of torsional vibrations and an investigation of its efficiency, Strojniški vestnik - Journal of Mechanical Engineering, 52(4), 225–236.
- 42. Timoshenko, S. (1960), Vibration problems in engineering, Praha, SNTL (in Czech).
- 43. Wilson W.K. (1968), Practical solution of torsional vibration problems, volume 4, London, Chapman & Hall LTD.
- 44. Wojnar G. (2009), Analysis of usefulness of different vibration signals for toothed gears diagnostics, Acta Mechanica et Automatica, 3(2), 111–114 (in Polish).
- 45. Yubao S., Jihong W., Dianlong Y. and Xisen W. (2013), Analysis and enhancement of torsional vibration stopbands in a periodic shaft system, Journal Of Physics D: Applied Physics, 46, 7-13.
- 46. Zoul V. (1982), Some aspects of flexible coupling development for sets with diesel engines, Strojírenství, 32(6/7), (in Czech)
- 47. Zoul V. (1988), Rato Highly Flexible Couplings, ČKD Praha, 20 (in Czech).
- 48. Zoul V. (1989) The use of flexible shaft couplings with low torsional stiffness for reducing dynamic torsional loads, IS ČKD Praha, 24-25, (in Czech).