References
- 1. Canche-Escamilla G., Duarte-Aranda S., Toledano M. (2014), Synthesis and characterization of hybrid silica/PMMA nanoparticles and their use as filler in dental composites, Materials Science and Engineering C: Materials for Biological Applications, 42, 161-167.
- 2. Ferracane J.L., Palin W.M. (2013), Effects of particulate filler systems on the properties and performance of dental polymer composites, in Vallittu P. editor, Non-Metallic Biomaterials for Tooth Repair and Replacement, Woodhead Publishing, Cambridge.
- 3. Finlay N., Hahnel S., Dowling A.H., Fleming G.J.P. (2013), The in vitro wear behavior of experimental resin-based composites derived from a commercial formulation, Dental Matererials, 29, 365–374.
- 4. Hambire U.V., Tripathi V.K. (2013), Optimization of compressive strength in Zirconia nanoclusters of the Bis-GMA and TEGDMA based dental composites, Procedia Engineering, 51, 494–500.
- 5. Heintze S.D., Zappini G., Rousson V. (2005), Wear of ten dental restorative materials in five wear simulators—Results of a round robin test, Dental Materials, 21, 304-317.
- 6. Kleczewska J., Bieliński D.M. (2007), Friction and wear of resin-based dental materials, Archives of Civil and Mechanical Engineering, 4, 87-96.
- 7. Lambrecht P., Debels E., Van Landuyt K., Peumans M., Van Meerbeek B. (2006), How to simulate wear? Overview of existing methods, Dental Materials, 22, 693–701.
- 8. Mair L.H. (2000), Wear in the mouth: the tribological dimension, in Addy M., et al., editors, Tooth wear and sensitivity. Clinical advances in restorative dentistry, Martin Dunitz Ltd., London.
- 9. Mair L.H., Stolarski T.A., Vowles R.W. Lloyd C.H. (1996), Wear: mechanisms, manifestations and measurement. Report of a workshop, Journal of Dentistry, 24, 141-148.
- 10. Palaniappan S., Celis J.P., Meerbeek B., Peumans M., Lambrechts P. (2013), Correlating in vitro scratch test with in vivo contact free occlusal area wear of contemporary dental composites, Dental Materials, 29, 259–268.
- 11. Palaniappan S., Peumans M., van Meerbeek B., Lambrechts P. (2013), Wear prediction in dental composites in Yan Y. editor, Bio-Tribocorrosion in Biomaterials and Medical Implants, Woodhead Publishing, Cambridge.
- 12. Ramalho A., Antunes P.V. (2005), Reciprocating wear test of dental composites: effect on the antagonist. Wear, 259, 1005–1011.
- 13. Schmalz G. (2009), Resin-Based Composites in Schmalz G. and Arenholt-Bindslev D. editors, Biocompatibility of Dental Materials, Springer, Berlin Heidelberg.
- 14. Souza J.C.M., Bentes A.C., Reis K., Gavinha S., Buciumeanu M., Henriques B., Silva F., Gomes J.R. (2016), Abrasive and sliding wear of resin composites for dental restorations, Tribology International 102, 154-160.
- 15. Thomaidis S., Kakaboura A., Mueller W.D., Zinelis S. (2013), Mechanical properties of contemporary composite resins and their interrelations, Dental Materials, 29, 132-141.
- 16. Turssi C.P. Ferracane J.L., Vogel K. (2005), Filler features and their effects on wear and degree of conversion of particulate dental resin composites, Biomaterials, 26, 4932-4937.
- 17. Turssi C.P., Faraoni-Romano J.J., Menezes M., Serra M.C. (2007), Comparative study of the wear behavior of composites for posterior restorations, Journal of Materials Science: Materials in Medicine, 18, 143-147.
- 18. Wang L., D’Alpino P.H., Lopes L., Pereira J. (2003), Mechanical properties of dental restorative materials: relative contribution of laboratory tests, Journal of Applied Oral Science, 11, 162–7.
- 19. Wang R., Bao S., Liu F., Jiang X., Zhang Q., Sun B., Zhu M. (2013), Wear behavior of light-cured resin composites with bimodal silica nanostructures as fillers, Materials Science and Engineering C: Materials for Biological Applications, 33, 4759–4766.
- 20. Wang R., Zhang M., Liu F., Bao S., Wu T., Jiang X., Zhang Q., Zhu M. (2015), Investigation on the physical-mechanical properties of dental resin composites reinforced with novel bimodal silica nanostructures, Materials Science and Engineering C: Materials for Biological Applications, 50, 266-273.