The Mathematical Modeling and Investigation of the Stress-Strain State of the Three-Layer Thermosensitive Hollow Cylinder

Rakocha, Iryna; Popovych, Vasyl

doi:10.1515/ama-2016-0027

Abstract

Stationary temperature distribution in a three-layer infinite hollow cylinder based on the thermosensitive body model was determined. The cylinder is subjected to the steady temperature on the inner surface and on the outer one is present the convective heat exchange. In the second layer exist heat sources with parabolic dependence on radial coordinate. The components of the thermostressed state have been found. The influence of the temperature dependence of the thermal and mechanical components characteristics of materials on the temperature distribution has been investigated.

References

1. Argeso H., Eraslan A. N. (2008), On use of temperature-dependent physical properties in thermomechanical calculations for solid and hollow cylinders, International journal of thermal sciences, 47(2), 136-146.10.1016/j.ijthermalsci.2007.01.029
Search in Google Scholar
2. Aziz A., Torabi M. (2013), Thermal stresses in a hollow cylinder with convective boundary conditions on the inside and outside surfaces, Journal of thermal stresses, 36(10), 1096-1111.10.1080/01495739.2013.818894
Search in Google Scholar
3. Bazarenko N. (2008), The contact problem for hollow and solid cylinders with stress-free faces, Journal of applied mathematics and mechanics, 72(2), 214-225.10.1016/j.jappmathmech.2008.04.002
Search in Google Scholar
4. Carslaw H. S., Jaeger J. C. (1959), Conduction of heat in solids, Oxford: Clarendon Press.
Search in Google Scholar
5. Fazeli H., Abdous A., Karabi H., Moallemi N., Esmaeili M. (2013), Analysis of transient heat conduction in a hollow cylinder using Duhamel theorem, International journal of thermophysics, 34(2), 350-365.10.1007/s10765-013-1418-y
Search in Google Scholar
6. Goto T., Suzuki M. (1996), A boundary integral equation method for nonlinear heat conduction problems with temperature dependent material properties, Internationla journal of heat and mass transfer, 39(4), 823-830.10.1016/0017-9310(95)00167-0
Search in Google Scholar
7. Grzes P. (2010) Influence of thermosensitivity of materials on the temperature of a PAD/DISC systems, Acta Mechanica et Automatica, 5(4), 46-53.
Search in Google Scholar
8. Kushnir R. M., Popovych V. S. (2009), Thermoelasticity of thermosensitive solids, Spolom, Lviv (in Ukrainian).
Search in Google Scholar
9. Kushnir R. M., Popovych V. S. (2011), Heat Conduction Problems of Thermosensitive Solids under Complex Heat Exchange, In Tech.
Search in Google Scholar
10. Kushnir R. M., Protsiuk Yu. B. (2010), Thermoelastic State of Layered Thermosensitive Bodies of Revolution for the Quadratic Dependence of the Heat-Conduction Coefficients, Materials Science, 46(1), 1-15.10.1007/s11003-010-9258-4
Search in Google Scholar
11. Lee H.-J. (1998), The effect of temperature dependent material properties on the response of piezoelectric composite materials, Journal of Intelligent Material Systems and Structures, 9(7), 503-508.10.1177/1045389X9800900702
Search in Google Scholar
12. Noda N. (1991), Thermal Stresses in Materials with Temperature-Dependent Properties, Applied Mechanics Reviews, 44(9), 383-397.10.1115/1.3119511
Search in Google Scholar
13. Och E. (2014), Frictional heating of sliding semi-spaces with simple thermal nonlinearities, Acta Mechanica et Automatica, 7(4), 236-240.10.2478/ama-2013-0040
Search in Google Scholar
14. Och E. (2015), Frictional heating during sliding of two semi-spaces with arbitrary thermal nonlinearity, Acta Mechanica et Automatica, 8(4), 204-208.10.2478/ama-2014-0037
Search in Google Scholar
15. Popovych V. S., Kalynyak B. M. (2014), Mathematical modeling and method of determining the static thermoelastic state of multilayered thermosensitive cylinders, Math. Methods and Phys.-Mech. Fields, 57(2), 169-186 (in Ukrainian).
Search in Google Scholar
16. Shariyat M. (2007), Thermal buckling analysis of rectangular composite plates with temperature dependent properties based on a layerwise theory, Thin-Walled Structures, 45(4), 439-452.10.1016/j.tws.2007.03.004
Search in Google Scholar
17. Shen H.-S. (2001), Thermal postbuckling behavior of imperfect shear deformable laminated plates with temperature-dependent properties, Computer Methods in Applied Mechanics and Engineering, 190(40-41), 5377-5390.10.1016/S0045-7825(01)00172-4
Search in Google Scholar
18. Shi Zh., Zhang T., Xiang H. (2007), Exact solutions of heterogeneous elastic hollow cylinders, Composite structures, 79(1), 140-147.10.1016/j.compstruct.2005.11.058
Search in Google Scholar
19. Tanigawa Y., Akai T. (1996) Transient heat conduction and thermal stress problems of a nonhomogeneous plate with temperature-dependent material properties, Journal of Thermal Stresses, 19(1), 77-102.10.1080/01495739608946161
Search in Google Scholar
20. Vigak V. (1999), Solutions of one-dimensional problems of elasticity and thermoelasticity for cylindrical piecewise homogeneous bodies, Journal of Mathematical Science, 96(2), 3056-3064.10.1007/BF02169706
Search in Google Scholar
21. Yevtuchenko A. A., Kuciej M., Och E. (2014), Influence of thermal sensitivity of the pad and disk materials on the temperature during braking, International Communications in Heat and Mass Transfer, 55, 84-92.10.1016/j.icheatmasstransfer.2014.04.002
Search in Google Scholar
22. Zhu X. K., Chao Y. U (2002), Effect of temperature-dependent material properties on welding simulation, Computers & Structures, 80(11), 967-976.10.1016/S0045-7949(02)00040-8
Search in Google Scholar

The Mathematical Modeling and Investigation of the Stress-Strain State of the Three-Layer Thermosensitive Hollow Cylinder

Abstract

Paradigm

My account