References
- 1. Al-Salem SM, Lettieri P, Baeyens J. (2010), Recycling and recovery routes of plastic solid waste (PSW): A review, Waste Management, 29, 2625-2643.
- 2. Badia J.D., Francisco V., Sigbritt K., Ribes-Greus A. (2009), Thermal analysis as a quality tool for assessing the influence of thermo-mechanical degradation on recycled poly(ethylene terephthalate), Polymer Testing, 28(2), 169–175.
- 3. Botos J., Murail N., Heidemeyer P., Kretschmer K., Ulmer B., Zentgraf T., Bastian M., Hochrein T. (2014), Color Measurement of Plastics - from Compounding via Pelletizing, up to Injection Molding and Extrusion, Proceedings of PPS-29: The 29th International Conference of The Polymer - Conference Papers, Book Series: AIP Conference Proceedings, V. 1593, 16-19.
- 4. Brachet P., Hoydal L.T., Hinrichsen E.L., Melum F. (2008), Modification of mechanical properties of recycled polypropylene from post-consumer containers, Waste Management, 28(12), 2456–2464.
- 5. Buccella M., Dorigato A., Crugnola F., Caldara M., Fambri L. (2015), Coloration Properties and Chemo-Rheological Characterization of a Dioxazine Pigment-Based Monodispersed Masterbatch, Journal Of Applied Polymer Science, 132(7), Article Number, 41452.
- 6. Chen W.-C., Nguyen M.-H., Chiu W.-H., Chen, T.-N., Tai, P.-H. (2016), Optimization of the plastic injection molding process using the Taguchi method, RSM, and hybrid GA-PSO, International Journal of Advanced Manufacturing Technology, 83(9-12), 1873-1886.
- 7. Chun DH. (1999), Cavity filling analyses of injection molding simulation: bubble and weld line formation, Journal of Materials Processing Technology, 90, 177-181.
- 8. Jałbrzykowski M. (2012), Influence of Regranulate Content on the Functional Properties of Parts Made from Thermoplastic Materials, Mach. Dyn. Res., 36(1), 82-89.
- 9. Jałbrzykowski M., Nachimowicz J. (2009), The problems of reliability and durability of tools for the injection of plastic materials, Acta Mechanica et Automatica, 3(1), 49-53.
- 10. Kayvon M. (2014), Sina Ebnesajjad and all: Handbook of Polymer Applications in Medicine and Medical Devices, William Andrew Inc., Elsevier, Oxford.
- 11. Laurence W. McKeen (2007), Effect of Temperature and other Factors on Plastics and Elastomers, William Andrew Inc., Elsevier, NY.
- 12. Matin I, Hadzistevic M, Hodolic J, Vukelic D, Lukic D (2012): A CAD/CAE-integrated injection mold design system for plastic products, International Journal Of Advanced Manufacturing Technology, 63(5-8), 595-607.
- 13. Navarro R., Torre L., Kenny J.M., Jiménez A. (2003), Thermal degradation of recycled polypropylene toughened with elastomers, Polymer Degradation and Stability, 82(2), 279–290.
- 14. Torres N., Robin J.J., Boutevin B. (2000), Study of thermal and mechanical properties of virgin and recycled poly(ethylene terephthalate) before and after injection molding, European Polymer Journal, 36(10), 2075–2080.
- 15. Wu C.-H., Chen W.-S. (2006), Injection molding and injection compression molding of three-beam grating of DVD pickup lens, Sensors and Actuators, Physical, 125 (2), 367-375.
- 16. Zawistowski H., Zięba Sz. (1999), Set the injection process, Plastech, Warsaw.
- 17. http://www.plastech.pl/pub/downloads/zytel-poradnik-przetworstwa-tworzywa-poliamidowe-dupont.pdf
- 18. http://www.wadim.com.pl/pl/a/Wady-wyprasek-Srodki-zaradcze-cz-1
- 19. https://www.elsevier.com/__data/assets/pdf_file/0011/91649/Plastics-Used-in-Medical-Devices_link.pdf
- 20. www2.dupont.com/Poland_Country_Site/pl_PL/.../10_zasad.html