Electrical Interface for a Self-Powered MR Damper-Based Vibration Reduction System

Łukasz Jastrzębski; Bogdan Sapiński

doi:10.1515/ama-2016-0025

.blurhash-client-img { display: none !important; }

Electrical Interface for a Self-Powered MR Damper-Based Vibration Reduction System

Acta Mechanica et Automatica

Volume 10 (2016): Issue 3 (September 2016)

By: Łukasz Jastrzębski and Bogdan Sapiński

Open Access

|Aug 2016

Abstract

The study investigates the behaviour of an electrical interface incorporated in a MR damper-based vibration reduction system powered with energy recovered from vibration. The interface, comprising the R, L and C elements, is connected in between the coil in an electromagnetic electric generator and the control coil in the MR damper and its function is to convert the output voltage from the generator. The interface model was formulated and computer simulations were performed to find out how the parameters of the interface should influence the frequency responses of the vibration reduction system.

References

1. Cho S. W., Jung H. J., Lee I. W. (2005), Smart passive system based on a magnetorheological damper, Smart Materials and Structures, 14, 707-714.10.1088/0964-1726/14/4/029
Search in Google Scholar
2. Cho S. W., Jung H. J., Lee I. W. (2007a), Feasibility study of smart passive control system equipped with electromagnetic induction device, Smart Materials and Structures, 16, 2323-2329.10.1088/0964-1726/16/6/036
Search in Google Scholar
3. Choi K. M., Jung H. J., Lee I. W., Cho S. W. (2007b), Feasibility study of an MR damper-based smart passive control system employing an electromagnetic induction device, Smart Materials and Structures, 16, 2323¬–9.10.1088/0964-1726/16/6/036
Search in Google Scholar
4. Choi Y. T., Werely N. M. (2009), Self-powered magnetorheological dampers, Journal of Vibration Acoustics, 131, 44–50.10.1115/1.3142882
Search in Google Scholar
5. Guo S., Yang S., Pan C. (2006), Dynamic modeling of magnetorheological damper behaviors, Journal of Intelligent Material Systems and Structures, 17, 1, 3-14.10.1177/1045389X06055860
Search in Google Scholar
6. Kwok N.M, Ha Q.P., Nguyen T.H., Li J., Samali B. (2006), A novel hysteretic model for magnetorheological fluid dampers and parameter identification using particle swarm, Sensors and Actuators A, 132, 441-451.10.1016/j.sna.2006.03.015
Search in Google Scholar
7. Rosół M., Sapiński B., Jastrzębski Ł. (2010), Laboratory testing of signal conditioning systems in an electromagnetic generator to power-supply an MR damper, Measurement, Automation, Monitoring, 56(10), 1228-1233 (in Polish).
Search in Google Scholar
8. Sapinski B. (2008), An experimental electromagnetic induction device for a magnetorheological damper, Journal of Theoretical and Applied Mechanics, 46(4), 933-947.
Search in Google Scholar
9. Sapiński B. (2011), Experimental study of a self-powered and sensing MR-damper-based vibration control system, Smart Materials and Structures, 20, 105007.10.1088/0964-1726/20/10/105007
Search in Google Scholar
10. Sapiński B. (2014), Energy-harvesting linear MR damper: prototyping and testing, Smart material and Structures, 23, 035021.10.1088/0964-1726/23/3/035021
Search in Google Scholar
11. Sapiński B., Jastrzębski Ł., Węgrzynowski M. (2011), Modelling of a self-powered vibration reduction system, Modelling in Engineering, 10(41), 353-362 (in Polish).
Search in Google Scholar
12. Sapiński B., Rosół M., Węgrzynowski M. (2016), Evaluation of an energy harvesting mr damper-based vibration reduction systemstem, Journal of Theoretical and Applied Mechanics, 54(2), 333-344.10.15632/jtam-pl.54.2.333
Search in Google Scholar
13. Snamina J., Sapinski B. (2011), Energy balance in self-powered MR damper-based vibration reduction system, Bulletin of the Polish Academy of Sciences Technical Sciences, 59(1), 75−80.10.2478/v10175-011-0011-4
Search in Google Scholar
14. Wang D. H., Bai X. X., Liao W H. (2009), Principle, design and modeling of an integrated relative displacement magnetorheological damper based on electromagnetic induction, Smart Materials and Structures, 18, 095025.10.1088/0964-1726/18/9/095025
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.1515/ama-2016-0025 | Journal eISSN: 2300-5319 | Journal ISSN: 1898-4088

Journal RSS Feed

Language: English

Page range: 165 - 172

Submitted on: Mar 31, 2016

Accepted on: Jul 11, 2016

Published on: Aug 6, 2016

Published by: Bialystok University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

vibration,

electrical interface,

MR damper,

energy harvesting

Related subjects:

Engineering,

Electrical engineering,

Electronics,

Mechanical engineering,

Mechanics,

Bioengineering and biomedical engineering,

Biomechanics,

Civil engineering,

Environmental engineering

© 2016 Łukasz Jastrzębski, Bogdan Sapiński, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 10 (2016): Issue 3 (September 2016)