References
- 1. Białas K. (2010), Passive and Active Elements in Reduction of Vibrations of Torsional Systems, Mechatronic Systems and Materials:Mechatronic Systems and Robotics, Solid State Phenomena, Vol. 164, 260-264.
- 2. Bocian M., Kulisiewicz M. (2013), Method of identifying nonlinear characteristic of energy dissipation in dynamic systems with one degree of freedom, Archives of Civil and Mechanical Engineering, Vol., 14 (3), pages 354-359.
- 3. Buchacz A., Wróbel A. (2010), Computer-aided analysis of piezoelectric plates, Solid State Phenomena, Vol. 164, 239-242.
- 4. Buchacz A., Banaś W., Płaczek M. (2015), Influence of the excitation parameters of the mechanical subsystem on effectiveness of energy harvesting system, IOP Conf. Series: Materials Science and Engineering, 95, pages 1-6.
- 5. Buchacz A., Płaczek M. (2014), Modelling of passive vibration damping using piezoelectric transducers – the mathematical model, Eksploatacja i Niezawodnosc, Vol. 16 (2), 301–306.
- 6. Buchacz A., Płaczek M., Wróbel A. (2013), Control of characteristics of mechatronic systems using piezoelectric materials, Journal of Theoretical and Applied Mechanics, Vol. 51, 225-234.
- 7. Dymarek A., Dzitkowski T. (2005), Modelling and synthesis of discrete – continuous subsystems of machines with damping, Journal of Materials Processing Technology, Vol. 164-165, 1317-1326.
- 8. Jamroziak K., Kosobudzki M. (2012), Determining the torsional natural frequency of underframe of off-road vehicle with use of the procedure of operational modal analysis, Journal of Vibroengineering, Vol. 14(2), 472-476.
- 9. Klarecki K., Hetmańczyk M., Rabsztyn D. (2015), Influence of the selected settings of the controller on the behavior of the hydraulic servo drive, Mechatronics - Ideas for Industrial Application. Advances in Intelligent Systems and Computing, Vol. 317, 91-100.
- 10. Ociepka P., Herbuś K., Gwiazda A. (2014), Application of the method basing on engineering knowledge and experience for adding the hexapod design process, Advanced Materials Research, Vol. 1036, 1005-1010.
- 11. Płaczek M. (2012), Dynamic characteristics of a piezoelectric transducer with structural damping, Solid State Phenomena, Vol. 198, 633-638.
- 12. Płaczek M. (2015), Modelling and investigation of a piezo composite actuator application, Int. J. Materials and Product Technology, Vol. 50(3/4), 244-258.
- 13. Płaczek M., Wróbel A., Baier A. (2015), Computer-aided strength analysis of the modernized freight wagon, IOP Conf. Series: Materials Science and Engineering, 95, pages. 1-6.
- 14. Szczepanik M., Stabik J., Wróbel G., Wierzbicki Ł. (2008), The use of thermal imaging systems for testing of polymeric materials, Modelowanie Inżynierskie, 5(36), 279-286 (in Polish).
- 15. Tuma J., Mahdal M., Suranek P. (2013), Simulation Study of the non-colocated control of a cantilever beam, Mechanics and Control, Vol. 32, 110-116.
- 16. Tuma J., Simek J., Skuta J., Los J. (2013), Active vibration control of journal bearings with the use of piezoactuators, Mechanical Systems and Signal Processing, Vol. 36, 618-629.
- 17. Tuma T., Suranek P., Mahdal M., Babiuch M. (2014), Simulation of the parametric excitation of the cantilever beam vibrations, 15th International Carpathian Control Conference (ICCC), Velke Karlovice, Czech Republic.
- 18. Wróbel A. (2012), Kelvin Voigt’s model of single piezoelectric plate, Journal of Vibroengineering, Vol. 14(2), 534-537.
- 19. Wróbel A.(2015), Analysis of possibility of applying the PVDF foil in industrial vibration sensors, IOP Conf. Series: Materials Science and Engineering, 95, pages 1-5.
- 20. Wróbel A., Płaczek M., Buchacz A., Majzner M. (2015), Study of mechanical properties and computer simulation of composite materials reinforced by metal, Int. J. Materials and Product Technology, Vol. 50(3/4), 259-275.
- 21. Wróbel A., Langer P. (2015), Designing of robotic production lines using CAx software, IOP Conf. Series: Materials Science and Engineering, 95 (2015), pages 1-6.