References
- 1. Bozydarnik V. V., Sulym H. T. (2012), Theory of Elasticity, V. 1, Publishing House of Lutsk National Technical University, Lutsk (in Ukrainian).
- 2. Kuz I. (2008), Numerical solution of plane plasticity problem about metal elbow strain, Visnyk of Lviv University, Ser. Mech. et Math., 69, 203–209 (in Ukrainian).
- 3. Kuz I., Kuz O., Pyz N. (2014), Influence of stress concentrators onto stress-strain state of elasto-plastic plates, Visnyk of the Ternopil National Technical University, 4(76), 79-88 (in Ukrainian).
- 4. Kuz O. (2005), Stress state of semi-plane with notch under uniform extension, Abstract of the Sixth Polish-Ukrainian Conference “Current problems of mechanics of nonhomogeneous media”, Warsaw, 76–77 (in Ukrainian).
- 5. Lazzarin P., Tovo R. (1996), A unified approach to the evaluation of linear elastic stress fields in the neibourhood of cracks or notches, International Journal of Fracture, 78, 3-19.
- 6. Muskhelishvili N.I. (2003), Some Basic Problems of the Mathematical Theory of Elasticity, Springer.
- 7. Panasiuk V. V., Savruk M. P., Datsyshyn O. P. (1976), Distribution of Stresses near Cracks in Plates and Shells, Naukova Dumka, Kyiv (in Russian).
- 8. Pobedria B. E. (1981), Numerical Methods in Theory of Elasticity and Plasticity, Publishing House of Moscow University, Moscow (in Russian).
- 9. Savruk M.P., Kazberuk A. (2006), Relationship between the stress intensity and stress concentration factor for sharp and rounded notches, Material Science (Springer), 42(6), 725-738.
- 10. Savruk M.P., Kazberuk A. (2007), A unified approach to problems of stress concentration near V-shaped notches with sharp and rounded tip, International Applied Mechanics, 43(2), 182-187.
- 11. Savruk M.P., Kazberuk A. (2007), Stress concentration near a rounded v-notch with arbitrary vertex curvature, Acta mechanica et Automatica, 1(1), 99–102 (in Polish).
- 12. Savruk M.P., Kazberuk A. (2010), Two-dimensional fracture mechanics problems for solids with sharp and rounded V-notches, International Journal of Fracture, 161, 79-95.
- 13. Savruk M.P., Kazberuk A. (2011), Antisymmetric stress distribution in an elastic body with a sharp or a rounded v-shaped notch, Material Science (Springer), 46(6), 711-722.
- 14. Savruk M.P., Kazberuk A. (2012), Distribution of stresses near V-shaped notches in the complex stressed state, Material Science (Springer), 47(4), 476-487.
- 15. Savruk M.P., Kazberuk A. (2014), Curvilinear cracks in the anisotropic plane and the limit transition to the degenerate material, Material Science (Springer), 50(2), 189-200.
- 16. Savruk M.P., Kazberuk A. (2014), Plane elgenvalue problems of the elasticity theory for orthotropic and quasi-orthotropic wedges, Material Science (Springer), 50(6), 707-714.
- 17. Savruk M. P., Kazberuk A., Tarasiuk G. (2012), Distribution of stresses over the contour of rounded V-shaped notch under antiplane deformation, Material Science (Springer), 47(6), 717-725.