References
- 1. (2013), Proposition for a Volumetric Error Model Considering Backlash in Machine Tools,, Vol. 15, Issue 8, 554-561.
- 2(2010), Kinematic analysis of a universal spatial mechanism containing a higher pair based on tori.Vol.46, Issue 4, 412–424.
- 3(2012), Analysis of the Bennett linkage in the geometry of tori., Elsevier, Vol.53, 122-127.
- 4(2013), Modeling of spatial dimension chains of mounting systems using techniques CAD/CAE., vol. 59, 652-655.
- 5(2014), Mountability parts of machine with rotating surface, fitted with positive clearance., 83, 29-38.
- 6(2012), Simulation of the movement of four-bar spatial linkage., vol.17, No.4, 723-732.
- 7Motion Simulation and Mechanism Design with SolidWorks Motion 2011., 1-19.
- 8(2014), Error modeling and sensitivity analysis of a parallel robot with SCARA (selective compliance assembly robot arm) motions., Vol. 27, Issue 4, 693-702.
- 9. (2005), Robotic automatic assembly system for random operating condition,, Vol. 27, Issue 3, 334-344.
- 10. (2015), Worm Gear Drives With Adjustable Backlash,, Vol.8, Issue 1, p.7.
- 11. (2010), Analysis of the geometrical accuracy of the positioning of the effector of the parallel manipulator spatial type triplanar., Vol.4 no.1, 56-60.
- 12(2012), Universal mechanism modeling method in virtual assembly environment., Vol. 25, Issue 6, 1105-1114.
- 13(2007), Combination of robot control and assembly planning for a precision manipulator., Vol. 31, Issue 7-8, 797-804.
- 14(2007), Optyczne pomiary zarysów powtarzalnych wykorzystaniem technik przetwarzania obrazu,, Vol.1, nr 2, 59-62.
- 15(2013), The Analysis of Part Positioning and Orientation in Robotic Assembly by Insertion., Vol. 7, 509-517.
- 16(2010), Design and analysis of a novel 6-DOF redundant actuated parallel robot with compliant hinges for high precision positioning., Vol. 61, Issue 4, 829-845.
- 17(2009), Diagnozowanie stanu luzów w połączeniach przegubowych przedniego zawieszenia samochodu,, vol.3 no.2, 122-124.
- 18(2014), Measurement error analysis and accuracy enhancement of 2D vision system for robotic drilling., Vol. 30, Issue 2, 160-171.
- 19(2011), Assessment and choice of an industrial robot with the use of AHP method., Vol. 31, nr 2, 201-211.
- 20(2013), The methodology and research conditions of Fanuc M-16iB industrial robot positioning accuracy and repeatability., 2013, Vol.1, 31-34.
Language: English
Page range: 145 - 150
Submitted on: Oct 20, 2014
Accepted on: Oct 9, 2015
Published on: Nov 7, 2015
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2015 Zbigniew Budniak, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.