References
- 1. Abu-Rub H., Guziński J., Jąderko A., Krzemiński Z. (2004), Practical Realisation of New Method of Synchronisation for Controlled Rectifier, International Conference on Power Electronics, Intelligent Motions and Power Quality PCIM 2004, Nuremberg, Germany, 533 - 538.
- 2. Abu-Rub H., Guziński J., Jąderko A., Krzemiński Z. (2005), Digital Implementation of a Novel Controlled Rectifier Synchronization Method, Electric Power Components and Systems, Vol. 33 (10), 1123 - 1135.
- 3. Dobrucki W., Gregorczyk R., Świątoniowski A., Zawada S. (1991), Introduction to design and operation of rolling mills - Calculations and experiments, Wydawnictwo AGH, Kraków, (in Polish).
- 4. Friedli T., Hartmann M., Kolar J.W. (2014), The Essence of Three- Phase PFC Rectifier Systems-Part II, IEEE Transactions on Power Electronics, Volume: 29 (2), 543- 560.
- 5. Gała M., Rak J., Kępiński M., Jagieła K. (2009), Application of Drive Window software for AC and DC drives operation states diagnostics, Electric Machines - Problem Issues, No.82/2009, BOBRME KOMEL Katowice, 33-38, ISSN 0239-3646, (in Polish).
- 6. Guziński J., Diaguet M., Krzemiński Z., Lewicki A., Abu-Rub H. (2009), Application of speed and load torque observers in high-speed train drive for diagnostic purposes, IEEE Transactions on Industrial Electronics, Vol 57(2), 565-574.
- 7. Jagieła K. (1997), Theoretical issues in calculation of load parameters of rolling table motors. Research Notes of Lvov State University of Technology - Electrical power engineering and electro-mechanical systems Systemy, № 340, 142-147, (in Ukrainian).
- 8. Jagieła K. (2003), Model of metallurgical discharge rolling table, Electrical Review, No.6/2003, 448- 452.
- 9. Jagieła K., Gała M. (2008), Setting screw electrical drive of the vertical milling cage using MASTER- FOLLOWER control, IX Inter-national Scientific Conference „New Technologies in Metallurgy and Materials Engineering”, Metallurgy Committee PAS, Czestochowa University of Technology, Vol. 1, 146-149 (in Polish).
- 10. Kolar J. W., Friedli T. (2013), The Essence of Three-Phase PFC Rectifier Systems-Part I, IEEE Transactions on Power Electronics, Volume: 28 (1), 176-198.
- 11. Michael C.A., Safacas A.N. (2007), Dynamic and Vibration Analysis of a Multimotor DC Drive System With Elastic Shafts Driving a Tissue Paper Machine, IEEE Transactions on Industrial Electronics, Vol. 54 (4), 2033-2046.
- 12. Multifex motor control for roller tables DCS800 Drives (20 to 5200 A), ABB Automation Products, Germany, 05-2008.