Modeling of the Tension and Compression Behavior of Sintered 316L Using Micro Computed Tomography

Doroszko, Michał; Seweryn, Andrzej

doi:10.1515/ama-2015-0012

Abstract

This paper describes the method of numerical modeling of the tension and compression behavior of sintered 316L. In order to take into account the shape of the mesostructures of materials in the numerical modeling, X-ray microtomography was used. Based on the micro-CT images, three-dimensional geometrical models mapped shapes of the porosity were generated. To the numerical calculations was used finite element method. Based on the received stress and strain fields was described the mechanism of deformation of the materials until fracture. The influence of material discontinuities at the mesoscopic scale on macromechanical properties of the porous materials was investigated.

References

1. Disegi J. A., Eschbach L. (2000), Stainless steel in bone surgery, Injury, 31,S-D2-6.10.1016/S0020-1383(00)80015-7
Search in Google Scholar
2. Ashby M. F., Evans A. G., Fleck N. A., Gibson L. J., Hutchinson J. W., Wadley H. N. G. (2000), Metal Foams: A Design Guid, Oxford: Butterworth-Heinemann.
Search in Google Scholar
3. Rammerstorfer F. G., Daxner T., Bohm H. J. (2002), Modeling and Simulation. In: Degischer HP, Kriszt B, editors. Handbook of Cellular Metals: Production, Processing Applications, Germany: Wiley-VCH.10.1002/3527600558.ch6
Search in Google Scholar
4. Kujime T., Tane M., Hyun S. K., Nakajima H. (2007), Threedimensional image-based modeling of lotus-type porous carbon steel and simulation of its mechanical behaviour by finite element method, Materials Science and Engineering A, 460-461, 220-226.10.1016/j.msea.2007.01.101
Search in Google Scholar
5. Maruyama B., Spowart J. E., Hooper D. J., Mullens H. M., Druma A. M., Druma C., Alam M. K. (2006), A new technique for obtaining three-dimensional structures in pitch-based carbon foams. Scripta Materialia, 54, 1709-1713.10.1016/j.scriptamat.2005.12.060
Search in Google Scholar
6. De Giorgi M., Carofalo A., Dattoma V., Nobile R., Palano F. (2010), Aluminium foams structural modelling, Computers & Structures, 88, 25-35.10.1016/j.compstruc.2009.06.005
Search in Google Scholar
7. Marcadon V. (2011), Mechanical modelling of the creep behaviour of Hollow-Sphere Structures, Computational Materials Science, 50, 3005-3015.10.1016/j.commatsci.2011.05.019
Search in Google Scholar
8. Nammi S. K., Myler P., Edwards G. (2010), Finite element analysis of closed-cell aluminium foam under quasi-static loading. Materials and Design, 31, 712-722.10.1016/j.matdes.2009.08.010
Search in Google Scholar
9. Michailidis N., Stergioudi F., Omar H., Tsipas D. N. (2010), An image-based reconstruction of the 3D geometry of an Al open-cell foam and FEM modeling of the material response, Mechanics of Materials, 42, 142-147.10.1016/j.mechmat.2009.10.006
Search in Google Scholar
10. Veyhl C., Belova I. V., Murch G. E., Fiedler T. (2011), Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography, Materials Science and Engineering A, 528, 4550-4555.10.1016/j.msea.2011.02.031
Search in Google Scholar
11. Michailidis N., Stergioudi F., Omar H., Tsipas D. (2010), FEM modeling of the response of porous Al in compression, Computational Materials Science, 48, 282-286.10.1016/j.commatsci.2010.01.008
Search in Google Scholar
12. Michailidis N. (2011) Strain rate dependent compression response of Ni-foam investigated by experimental and FEM simulation methods, Materials Science and Engineering A, 528, 4204-4208.10.1016/j.msea.2011.02.002
Search in Google Scholar
13. Veyhl C., Fiedler T., Jehring U., Andersen U., Bernthaler T., Belova I. V., Murch G.E. (2013), On mechanical properties of sintered metallic fibre structures, Materials Science and Engineering A, 562, 83-88.10.1016/j.msea.2012.11.034
Search in Google Scholar
14. EN ISO 6892-1:2009, Metallic materials - Tensile testing - Part 1: Method of test at room temperature, CEN: 2009.
Search in Google Scholar
15. Derpeński Ł., Seweryn A. (2011), Experimental Research into Fracture of EN-AW 2024 and EW-AW 2007 Aluminum Alloy Specimens with Notches Subjected to Tension, Experimental Mechanics, 51, 1075-1094.10.1007/s11340-010-9420-9
Search in Google Scholar
16. Marc® 2010, Product Documentation, Volume B: Element Library.
Search in Google Scholar
17. Falkowska A., Seweryn A. (2015), Fatigue of sintered porous materials based on 316l stainless steel under uniaxial loading. Materials Science (in press).10.1007/s11003-015-9829-5
Search in Google Scholar

Modeling of the Tension and Compression Behavior of Sintered 316L Using Micro Computed Tomography

Abstract

Paradigm

My account