Diagnostics of Gears and Compressors by Means of Advanced Automatic System

Tomaszewski, Jerzy; Rysinski, Jacek

doi:10.1515/ama-2015-0004

Abstract

In the present paper, the diagnostics problems of gears and air-compressors are discussed. The diagnostics has been performed by means of wireless system WiViD. This system is a unique design solution, in which several functions are divided and performer by two separate devices. The mentioned device functions are as follows: data handling, processing, their analysis and presentation. In the paper, own measurement procedures were created, checked and presented. The evaluation of technical conditions of some devices was done based upon the registered diagnostic symptoms, which were compared with the allowable limits.

References

1. Barkov A. V., Barkova N. A. (1996), Diagnostics of gearings and geared couplings using envelope spectra methods, Proceedings of the 20th Annual Meeting of the Vibration Institute. Saint Louis, Missouri USA, 75-83.
Search in Google Scholar
2. Choy F. K., Polyshchuk V., Zakrajsek J. J., Handschuh R. F., Townsend D. P. (1996), Analysis of the effects of surface pitting and wear on the vibration of a gear transmission system, Tribology International, Vol. 29, No. 1, 77-83.
Search in Google Scholar
3. Farrahi G. H., Tirehdast M., Masoumi K. A. E., Parsa S., Motakefpoor M. (2011), Failure analysis of a gas turbine compressor, Engineering Failure Analysis, Vol. 18, No. 1, 474-484.
Search in Google Scholar
4. Feng Z., Zuo M.J . (2013), Fault diagnosis of planetary gearboxes via torsional vibration signal analysis, Mechanical Systems and Signal Processing, Vol. 36, No. 2, 401-421.
Search in Google Scholar
5. Feng Z. Z., Ming J. (2012), Vibration signal models for fault diagnosis of planetary gearboxes, Journal of Sound and Vibration, Vol. 331, No. 22, 4919-4939.
Search in Google Scholar
6. ISO 10816-1 (1995), Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines.
Search in Google Scholar
7. ISO 10816-3 (2009), Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ.
Search in Google Scholar
8. Mirota K., Tomaszewski J., Rysiński J. (2009), Diagnostics of scoring in gears, Solid State Phenomena, 144, 118-123.10.4028/www.scientific.net/SSP.144.118
Search in Google Scholar
9. Rama R. A., Dutta B. K. (2012), Vibration analysis for detecting failure of compressor blade, Engineering Failure Analysis, Vol. 25, 211-218.
Search in Google Scholar
10. VDI 3836 (2012), Measurement and evaluation of mechanical vibration of screw-type compressors and roots blowers, Addition to DIN ISO 10816-3.
Search in Google Scholar

Diagnostics of Gears and Compressors by Means of Advanced Automatic System

Abstract

Paradigm

My account