References
- ASME IX QW-409 standard (2010). Electrical characteristic.
- Goldak, J., Asadi, M., Alena, R.G. (2010). Why power per unit length of weld does not characterize a weld? Computational Materials Science, 48, 390-401.
- Górka, J., Janicki, D., Fidali, M., Jamrozik, W. (2017). Thermographic assessment of the HAZ properties and structure of thermomechanically treated steel. International Journal Thermophysics, 38, 183. DOI 10.1007/s10765-017-2320-9.
- Hrabe, P., Choteborsky, R., Navratilova, M. (2009). Influence of welding parameters on geometry of weld deposit bead. Int. Conf. Economic Eng. Manufacturing Systems, Brasov, 26-27 November 2009, Regent, 103(27), 291-294.
- Kensik, R. (2006). Assessment of linear energy in MIG / MAG processes. Welding Technology Review, 78(9-10), 5-8. (in Polish)
- Kudła, K., Wojsyk, K. (2010). Normalized linear energy and the amount of heat introduced during welding. Welding Technology Review, 82(12), 21-25. (in Polish)
- Labanowski, J., Fydrych, D., Rogalski, G., Samson, K. (2011). Underwater welding of duplex stainless steel, Solid State Phenomena, 183, 101-106.
- Liskevych, O., Scotti, A. (2015). Determination of the gross heat input in arc welding. Journal of Materials Processing Technology, 225, 139-150.
- Loos, P. (1993). Europäischer Normentwurf über die Verarbeitung ferritischer Stähle. Schweissen & Schneiden, 45(1), 59-70.
- Łabanowski, J. (2019). Corrosion-resistant steels. Gdańsk. Ed. Gdańsk University of Technology. (in Polish)
- Matkowski, P., Nowacki, J., Sajek, A. (2016). The influence of welding heat input on the microstructure of joints of S1100QL steel in one-pass welding. Archives of Civil and Mechanical Engineering, 16, 777-783.
- Nasir, N.S.M., Razab, M.K.A.A., Ahmad, M.I., Mamat, S. (2017). Influence of heat input on carbon steel microstructure. ARPN Journal of Engineering and Applied Sciences, 12, 2689-2697.
- Ostromęcka, M. (2017). Influence of linear energy on selected aspects of the quality of joints welded with a non-consumable electrode with the use of pulsed current. Welding Technology Review, 89(6), 20-23. (in Polish)
- PN-NE 1011-1 (2001). Guidelines for welding steel. Part 1. General guidelines for arc welding. (Polish standard).
- Romek, D., Selech, J., Ulbrich, D., Felusiak, A., Kieruj, P., Janeba-Baroszewicz, E., Pieniak, D. (2020). The impact of padding weld shape of agricultural machinery tools on their abrasive wear. Tribologia, 14(2), 55-62.
- Sajek, A., Nowacki, J. (2018). Comparative evaluation of various experimental and numerical simulation methods for determination of t8/5 cooling times in HPAW process weldments, Archives of Civil and Mechanical Engineering, 18, 2018, 583-591.
- Winczek, J. (2011). New approach to modeling of temperature field in surfaced steel elements. International Journal of Heat and Mass Transfer, 54, 4702-4709.
- Wojsyk, K., Macherzyński, M. (2016). Determination of linear energy of welding by measuring trans-verse fields of welds. Biuletyn Instytutu Spawalnictwa, 60(5), 75-79. (in Polish)
- Wojsyk, K., Macherzyński, M., Lis, R. (2017). Ocena ilości ciepła wprowadzonego do spoin i napoin metodą pomiaru ich pól poprzecznych w konwencjonalnych i hybrydowych procesach spawalniczych. Przegląd Spawalnictwa, 89(10), 67-82.