Methodology of Testing Foil Bearings in the Start-Stop Cycle in the Presence of a Working Medium - Stabilization of Temperature in the Test Chamber

Moczulak, Bartosz; Miąskowski, Wojciech

doi:10.1515/agriceng-2020-0027

Abstract

The article presents the methodology of testing sliding bearings with a flexible shell, focusing on the issue of temperature increase during experiments for a specific time interval of the START-STOP test cycle. Selected material pairs, used in previous studies, were used in the experiment. The stand used for tests in the start-stop cycle was developed under the project POIG.01.03.01-00-027 / 08-00 at the Faculty of Technical Sciences UWM in Olsztyn.

References

Daejong, K., Soongook, P. (2009). Hydrostatic air foil bearings: Analytical and experimental investigation. Tribology International, 42, 413-425.10.1016/j.triboint.2008.08.001
Search in Google Scholar Back to article
Dellacorte, C. (1997). A new foil air bearing test rig for use to 700°C and 70,000 rpm. NASA TM–107405.
Search in Google Scholar Back to article
Howard, S.A., San Andres, L. (2010). A new analysis tool assessment for rotordynamic modeling of gas foil bearings. ASME Turbo Expo 2010: Power for Land, Sea and Air GT2010, Glasgow, UK (GT2010-22508).
Search in Google Scholar Back to article
Kiciński, J., Żywica, G., Miąskowski, W. (2010). The Dynamic Properties of the Micro-Rotor Supported on Fluid-Film Bearings. IFToMM International Conference on Rotor Dynamics. Seoul (South Korea), 681-685.
Search in Google Scholar Back to article
Kiciński, J., Żywica, G. (2010). The numerical analysis of the steam microturbine rotor supported on foil bearing. Advances in Vibration Engineering, 11, 113-119.
Search in Google Scholar Back to article
Komar, W. (2015). Analiza zużycia cienkiej folii metalowej. Mechanik, 7, 417-424.
Search in Google Scholar Back to article
Miąskowski, W., Nalepa, K., Żywica, G. (2009a). Foil micro-bearing tests. Technical Sciences, 12, 249-258.10.2478/v10022.009-0021-8
Search in Google Scholar Back to article
Miąskowski, W., Pietkiewicz, P., Żywica, G. (2009b). Modelling foil bearing. Technical Sciences, 12, 241-248.10.2478/v10022.009-0020-9
Search in Google Scholar Back to article
Miąskowski, W., Moczulak, B., Nalepa, K., Pietkiewicz, P., Komar, W. (2017). START-STOP analysis of high-speed bearings with a flexible bushing, International Multidisciplinary Scientific Geo-Conference Surveying Geology and Mining Ecology Management, SGEM, PAPER, 628-632. doi:10.5593/sgem2017H/63/S24.00910.5593/sgem2017H/63/S24.009
Search in Google Scholar Back to article
Michalak, M., Michalczewski, R., Piekoszewski, W., Szczerek, M., Wulczyński, J. (2014). Urządzenie do badania odporności na zużycie materiałów przeznaczonych na elementy łożysk foliowych. Tribologia, 3, 131-142.
Search in Google Scholar Back to article
Moczulak, B., Miąskowski, W. (2019). Methods of research of foil bearings in START-STOP cycle in the presence of working medium. Agricultural Engineering, 23, 41-51.10.1515/agriceng-2019-0035
Search in Google Scholar Back to article
Nalepa, K., Miąskowski, W., Pietkiewicz, P., Miazio, Ł. (2013). Stanowisko do badania łożysk foliowych w cyklu Start-Stop w obecności czynnika niskowrzącego. Mechanik, 7, 519-524.
Search in Google Scholar Back to article

Methodology of Testing Foil Bearings in the Start-Stop Cycle in the Presence of a Working Medium - Stabilization of Temperature in the Test Chamber

Abstract

Paradigm

My account