References
- 1. Qiang X., Bijlaard F., Kolstein H.: Elevated-temperature mechanical properties of high strength structural steel S460N: Experimental study and recommendations for fire-resistance design. Fire Safety Journal. 55 (2013), 15-21.
- 2. Topaç M.M., Günal H., Kuralay N.S.: Fatigue failure prediction of a rear axle housing prototype by using finite element analysis. Engineering Failure Analysis. 16(5) (2009), 1474-1482.
- 3. Omajane J., Martikainen J., Kah P.: Weldability of thermo-mechanically rolled steels used in oil and gas offshore structures. The International Journal of Engineering And Science. 3(5) (2014), 62-69.
- 4. Skowrońska B., Szulc J., Chmielewski T., Sałaciński T., Świercz R.: Properties and microstructure of hybride Plasma+MAG welded joints of thermomechanically treated S700MC steel, 27th Anniversary International Conference on Metallurgy and Materials (METAL), Brno, Czech Republik, 2018.
- 5. Pańcikiewicz K., Tuz L., Żurek Z., Rakoczy Ł.: Optimization of filler metals consumption in the production of welded steel structures. Advances in Materials Science. 16(1) (2016), 27-34.
- 6. Sajek A., Nowacki J.: Comparative evaluation of various experimental and numerical simulation methods for determination of t8/5 cooling times in HPAW process weldments. Archives of Civil and Mechanical Engineering. 18(2) (2018), 583-591.
- 7. Górka J.: Assessment of steel subjected to thermomechanical control process with respect to weldability. Metals. 3(3) (2018), 169.
- 8. Łabanowski J., Prokop-Strzelczyńska K., Rogalski G., Fydrych D: The effect of wet underwater welding on cold cracking susceptibility of duplex stainless steel. Advances in Materials Science. 16(2) (2016), 68-77.
- 9. Li H. L., Liu D., Guo N., Chen H., Du Y. P., Feng J. C.: The effect of alumino-thermic addition on underwater wet welding process stability. Journal of Materials Processing Technology. 245 (2017), 149-156.
- 10. Purnama D., Winarto W., Susilo F.H.: Mechanical properties of underwater wet welded marine steel plates using different low hydrogen electrodes. AIP Conference Proceedings 1977, 030015 (2018), 1-5.
- 11. Yin Y., Yang X., Cui L., Cao J., Xu W.: Microstructure and mechanical properties of underwater friction taper plug weld on X65 steel with carbon and stainless steel plugs. Science and Technology of Welding and Joining. 21(4) (2016), 259-266.
- 12. Heirani F., Abbasi A., Ardestani M.: Effects of processing parameters on microstructure and mechanical behaviors of underwater friction stir welding of Al5083 alloy. Journal of Manufacturing Processes. 25 (2017), 77-84.
- 13. Rogalski G., Fydrych D., Łabanowski J.: Underwater wet repair welding of API 5L X65M pipeline steel. Polish Maritime Research. SI 24 (93) (2017), 188-194.
- 14. Chen H., Guo N., Shi X., Du Y., Feng J., Wang G.: Effect of water flow on the arc stability and metal transfer in underwater flux-cored wet welding. Journal of Materials Processing Technology. 31 (2018), 103-115.
- 15. Shi Y., Hu Y., Yi Y., Lin S., Li Z.: Porosity and microstructure of underwater wet FCAW of duplex stainless steel. Metallography, Microstructure, and Analysis. 6(5) (2017), 383-389.
- 16. Fydrych D., Łabanowski J., Tomków J., Rogalski G.: Cold cracking of underwater wet welded S355G10+N high strength steel. Advances in Materials Science. 15(3) (2015), 48-56.
- 17. Maksimov S.Y.: Underwater arc welding of higher strength low-alloy steels. Welding International. 24(6) (2010), 49-54.
- 18. Cheng F., Hu S., Gao W., Deng C., Wang D., Jing H.: Diffusible hydrogen content and microstructure characteristic in the joint by underwater shielded metal arc welding. Transactions of the China Welding Institution. 35(9) (2014), 45-48.
- 19. Świerczyńska A., Fydrych D., Rogalski G.: Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding. International Journal of Hydrogen Energy. 42(38) (2017), 24532-24540.
- 20. Fydrych D., Świerczyńska A., Tomków J.: Diffusible hydrogen control in flux cored arc welding process. Key Engineering Materials. 597 (2014), 171-178.
- 21. Schaupp T., Rhode M., Kannengiesser T.: Influence of welding parameters on diffusible hydrogen content in high-strength steel welds using modified spray arc process. Welding in the World. 62(1) (2018), 9-18.
- 22. Pandey C., Mahapatra M., Kumar P., Saini N.: Effect of weld consumable condition of the diffusible hydrogen and subsequent residual stress and flexural strength on multipass welded P91 steels. Metallurgical and Materials Transactions B. 49 (2018), 2881.
- 23. Hanzaei A. T., Marashi S. P. H., Ranjbarnodeh E.: The effect of hydrogen content and welding conditions on the hydrogen induced cracking of the API X70 steel weld. International Journal of Hydrogen Energy. 43(19) (2018), 9399-9407.
- 24. Li H., Liu D., Dong Y., Yan Y., Guo N., Feng J.: Microstructure and mechanical properties of underwater wet welded high-carbon-equivalent steel Q460 using austenitic consumables. Journal of Materials Processing Technology. 249 (2017), 149-157.
- 25. Zhang H.T., Dai X.Y., Feng J.C., Hu L.L.: Preliminary investigation on real-time induction heating-assisted underwater wet welding. Welding Journal. 1(2015), 8-15.
- 26. Wang J., Sun Q., Jiang Y., Zhang T., Ma J., Feng J: Analysis and improvement of underwater wet welding process stability with static mechanical constraint support. Journal of Manufacturing Processes. 34 (2018), 238-250.
- 27. Wang J., Sun Q., Laijun W., Liu Y., Teng J., Feng J.: Effect of ultrasonic vibration on microstructural evolution and mechanical properties of underwater wet welding joint. Journal of Materials Processing Technology. 246 (2017), 157-197.
- 28. Tomków J., Rogalski G., Fydrych D., Łabanowski J.: Improvement of S355G10+N steel weldability in water environment by Temper Bead Welding. Journal of Materials Processing Technology. 262 (2018), 372-381.
- 29. Aloraier A., Ibrahim R., Thomson P.: FCAW process to avoid the use of post weld heat treatment: International Journal of Pressure Vessels and Piping. 83(5) (2006), 394-398.
- 30. Fydrych D., Świerczyńska A., Rogalski G., Łabanowski J.: Temper bead welding of S420G2+M steel in water environment. Advances in Materials Science. 16(4) (2016), 5-16.
- 31. Tomków J., Łabanowski J., Fydrych D., Rogalski G.: Cold cracking of S460N steel welded in water environment. Polish Maritime Research. 25, 3 (99) (2018), 131-136
- 32. Schröter F., Lehnert T.: Trends in the application of high-performance steel in European bridge building. The Eight International Conference „Bridges in Banube Basin”. (2013), 33-50.