References
- 1. Banea M. D. da Silva L.F.M.: The effect of temperature on the mechanical properties of adhesives for the automotive industry, Proc. IMechE Vol. 224 Part L: J. Materials: Design and Applications (2010) 51-62.
- 2. Jethwa J.K., Kinloch A.J.: The fatigue and durability behaviour of automotive adhesives. Part I: Fracture Mechanics Tests, The Journal of Adhesion, 61(1-4) (1997) 71-95.
- 3. Paiva Rosa M.M., António Carlos A.C., da Silva Lucas F.M.: Optimal design of adhesive composition in footwear industry based on creep rate minimization, International Journal of Advanced Manufacturing Technology 84(9-12) (2016) 2097–2111.
- 4. Skeist I. (ed.), Handbook of Adhesives, Springer, Berlin, 2011.
- 5. Broughton J.G, Fitton M.D.: Science of Mixed-Adhesive Joints. [In] Hybrid Adhesive Joints Advanced Structured Materials book series, (2011) 257-281.
- 6. Sadowski T., Golewski P., Zarzeka-Raczkowska E.: Damage and failure processes of hybrid joints: Adhesive bonded aluminium plates reinforced by rivets, Computational Materials Science, 50(4) (2011) 1256-1262.
- 7. Rośkowicz, M., Rożek, M.: Analiza trwałości zmęczeniowej połączeń mechanicznych i klejowo-mechanicznych, Technologia i Automatyzacja Montażu, 2 (2013) 16-19.
- 8. Adams R.D., Harris J.A.: A critical assessment of the block impact test for measuring the impact strength of adhesive bonds, International Journal of Adhesion and Adhesives, 16(2) (1996) 61-71.
- 9. Komorek A., Godzimirski J., Pietras A.: Numerical Analysis of Impact Loading of Adhesive Joints, Advances in Materials Science and Engineering vol. 2017 (2017), 10 pages, doi.org/10.1155/2017/5941086
- 10. The experimental investigation and preliminary dynamic numerical analysis of the effect of sample geometry upon the test results of impact loading of adhesive bonds. Komorek A., Godzimirski J., Pietras A., Proceedings of the 7th International Conference on Mechanics and Materials in Design, FEUP-INEGI 2017, (2017) 1013-1014.
- 11. Godzimirski J., Kozakiewicz J., Łunarski J., Zielecki W.: Konstrukcyjne połączenia klejowe elementów metalowych w budowie maszyn, Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów, 1997.
- 12. Godzimirski J.: Analiza wytrzymałości połączeń klejowych elementów metalowych obciążonych statycznie. Rozprawa habilitacyjna. WAT, Warszawa (1988).
- 13. Rudawska A., Stančeková D., Brzęczek J.: The visual method in quality assessment of single-lap adhesive joints Advances in Science and Technology Research Journal 10(31) (2016) 109–118. doi.org/10.12913/22998624/64066.
- 14. Barra G., Vertuccio L., Vietri U., Naddeo C., Hadavinia H., Guadagno L.: Toughening of Epoxy Adhesives by Combined Interaction of Carbon Nanotubes and Silsesquioxanes, Materials 10(10) (2017) 1131. doi:10.3390/ma10101131.
- 15. da Silva L.F.M., Adams R.D., Gibbs M.: Manufacture of adhesive joints and bulk specimens with high-temperature adhesives, International Journal of Adhesion & Adhesives, 24 (2004) 69–83.
- 16. Chang, L., Guo, W., and Tang, Q.: Assessing the tensile shear strength and interfacial bonding mechanism of poplar plywood with high-density polyethylene films as adhesive, BioResouces, 12(1) (2017) 571-585.
- 17. Łępicka M., Grądzka-Dahlke M.: Surface Analysis for Signs of Corrosion of Fixed Orthodontic Appliances Used In Vivo, Advances in Material Science, 16(3) (2016) 5-14.
- 18. Rokosz K., Hryniewicz T., Dudek Ł., et al.. SEM And EDS Analysis Of Nitinol Surfaces Treated By Plasma Electrolytic Oxidation. Advances in Materials Science, 15(3) (2015) 41-47 doi:10.1515/adms-2015-0014.