References
- 1. Oliver W., Pharr G.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research 7 (1992), 1564-1583.
- 2. Kwok C., Man H., Cheng F.: Cavitation erosion and pitting corrosion of laser surface melted stainless steels. Surface and Coatings Technology, 99 (1998), 295-304.
- 3. Conde A., Colaco R., Vilar R., Damborenea J.: Corrosion behaviour of steels after laser surface melting. Materials and Design, 21, (2000), 441-445.
- 4. Khalfallah I., Rahoma M., Abboud J., Benyounis K.: Microstructure and corrosion behaviour of austenitic stainless steel treated. Optics & Laser Technology, 43 (2011), 806-813.
- 5. McCafferty E., Moore P.: Corrosion behavior of laser-surface melted and laser-surface alloyed steels. Journal of the Electrochemical Society, 133 (1986), 1090-1096.
- 6. Akgun O., Inal O.: Laser surface melting and alloying of 304L stainless steel: Part II. Corrosion and Wear Resistance Properties. Journal of Materials Science, 30 (1995), 6105-6112.
- 7. Liang W., Xiaolei X., Zhiwei Y., Zukun H.: Low pressure plasma arc source ion nitriding of austenitic stainless steel. Surface and Coatings Technology, 124 (2000), 93-96.
- 8. Liang W., Xiaolei X., Jiujun X., Yaqin S.: Characteristic of low pressure plasma arc source ion nitrided layer on austenitic stainless steel at low temperature. Thin Solid Films, 391 (2001), 11-16.
- 9. Borowski T., Trojanowski J., Sobiecki R., Wierzchoń T.: Low temperature glow-discharge nitriding of austenitic steel – medicine applification aspects. Surface Engineering, 3 (2005), 21-26.
- 10. Trojanowski J., Kamiński M., Wierzchoń T.: Niskotemperaturowe azotowanie stali austenitycznych w warunkach wyładowania jarzeniowego. Inżynieria powierzchni, 2 (2002), 3-10.
- 11. Sobiecki J., Brojanowska A., Kazior J., Wierzchoń T.: The structure and corrosion resistance of sinters form 316L steel after plasma nitriding. Inżynieria Materiałowa, 5 (2006), 1232-1235.
- 12. Sobiecki J., Kazior J., Wierzchoń T.: Low temperature plasma nitriding of sintered austenitic steel. Inżynieria Materiałowa, 5 (2005), 434-436.
- 13. Trojanowski J., Senatorski J.: Opracowanie technologii azotowania jarzeniowego stali typu 316L. Sprawozdanie Nr 13.2.01.230. Instytutu Mechaniki Precyzyjnej, 2006.
- 14. Li C. X., Bell T.: Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel. Corrosion Science, 46 (2004), 1527-1547.
- 15. Yasumaru N.: Low temperature ion nitriding of austenitic stainless steels. Materials Transactions, 39 (1998), 1046-1052.
- 16. Poirier L., Corre Y., Lebrun J.: Solutions to improve surface hardness of stainless steels without loss of corrosion resistance. Surface Engineering, 18 (2002), 439-442.
- 17. Sitko A., Szkodo M., Gazda M.: The Characteristic of Surface Layers on Austenitic Stainless Steel After Glow-discharge Nitriding Process. Solid State Phenomena, Vol. 165 (2010), 165-168.
- 18. Sitko A., Szkodo M., Gazda M.: The Influence of Gas Mixture in the Glow-discharge Nitriding Process of Austenitic Stainless Steel on Characteristic of Nitrided Cases. Key Engineering Materials, Vol. 490 (2012), 282-287.
- 19. Chmiel J., Janicki W., Krella A., Steller J.: Cavitation loading tests at the vibration stand with the resting sample. Problemy eksploatacji, 1, (2010), 91-100.