References
- 1. Fydrych D., Łabanowski J., Rogalski G.: Weldability of high strength steels in wet welding conditions. Polish Maritime Research, 2 (2013).
- 2. Gao W., Wang D., Cheng F., Deng C., Liu Y., Xu W.: Enhancement of the fatigue strength of underwater wet welds by grinding and ultrasonic impact treatment. Journal of Materials Processing Technology, 223 (2015).
- 3. Zhang H.T., Dai X.Y., Feng J.C., Hu L.L.: Preliminary investigation on real-time induction heating-assisted underwater wet welding. Welding Journal, 1 (2015).
- 4. Guo N., Du Y., Feng J., Guo W., Deng Z.: Study of underwater wet welding stability using an X-ray transmission method. Journal of Materials Processing Technology, 225 (2015).
- 5. Guo N., Guo W., Du Y., Fu Y., Feng J.: Effect of boric acid on metal transfer mode of underwater flux-cored wire wet welding. Journal of Materials Processing Technology, 223 (2015).
- 6. Gao W.B., Wang D.P., Cheng F.J., Deng C.Y., Xu W.: Underwater wet welding for HSLA steels: chemical composition, defects, microstructures, and mechanical properties. Acta Metallurgica Sinica (English Letters), 9 (2015).
- 7. Maksimov S.Y.: Prevention of cold cracks in heat affected zone in underwater welding of low-alloyed high-strength steels. Збірник Наукових Праць НУК, 4 (2014).
- 8. Silva L.F., dos Santos V.R., Paciornik S., Mertens J.C.E., Chawla N.: Multiscale 3D characterization of discontinuities in underwater wet welds. Materials Characterization, 107 (2015).
- 9. Fydrych D., Rogalski G., Tomków J., Łabanowski J.: The tendency to form cold cracks at the S420G2+M steel joints welded under water using wet method (in Polish). Przegląd Spawalnictwa (Welding Technology Review), 10 (2013).
- 10. Maksimov S.Y.: Underwater arc welding of higher strength low-alloy steels. Welding International, 6 (2010).
- 11. Omajene J.E., Martikainen J., Wu H., Kah P.: Optimization of underwater wet welding process parameters using neural network. International Journal of Mechanical and Materials Engineering, 1 (2014).
- 12. Ćwiek J.: Hydrogen degradation of weldable high strength steels (in Polish). Gdansk Univ. Of Technology, Gdańsk 2006.
- 13. Garašić I., Kralj S., Kožuh Z., Pacak M.: Analysis of underwater repair technology on the jack-up platform spud can. Brodogradnja, 2 (2010).
- 14. Fydrych D., Łabanowski J., Rogalski G., Haras J., Tomków J., Świerczyńska A., Jakóbczak P., Kostro Ł.: Weldability of S500MC steel in underwater conditions. Advances in Materials Science, 2 (2014).
- 15. Fydrych D., Kozak T.: Underwater welded joint properties investigation. Advances in Materials Science, 4 (2009).
- 16. Sharp J.V., Billingham J., Robinson M.J.: The risk management of high-strength steels in jack-ups in seawater. Marine Structures, 14 (2001)
- 17. PN-EN ISO 17642-2:2005 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests
- 18. Kurji R., Coniglio N.: Towards the establishment of weldability test standards for hydrogen-assisted cold cracking. The International Journal of Advanced Manufacturing Technology, 77 (2015).
- 19. Kannengiesser T., Boellinghaus T.: Cold cracking tests-an overview of present technologies and applications. Welding in the World, 1 (2013).
- 20. PN-EN 10225:2011 Weldable structural steels for fixed offshore structures - Technical delivery conditions.
- 21. PN-EN ISO 17637:2011 Non-destructive testing of welds. Visual testing of fusion-welded joints
- 22. PN-EN ISO 3452-1:2013-08 Non-destructive testing -- Penetrant testing -- Part 1: General principles
- 23. PN-EN ISO 17639:2013-12 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
- 24. PN-EN ISO 9015-1:2011 Non-destructive testing of welds. Hardness testing. Part 1.
- 25. PN-EN ISO 15614-1:2008 Specification and qualification of welding procedures for metallic materials -Welding procedure test - Arc and gas welding of steels and arc welding of nickel and nickel alloys.