Structural performance of repaired reinforced concrete beams with damaged compression zones: an experimental study using digital image correlation
References
- Adamczak-Bugno, A., Lipiec, S., Vavruš, M., Koteš, P., 2022. Non-Destructive Methods and Numerical Analysis Used for Monitoring and Analysis of Fibre Concrete Deformations. Materials, 15, 7268. DOI:10.3390/ma15207268
- Blikharskyy, Y., Kopiika, N., Khmil, R., Selejdak, J., Blikharskyy Z., 2022. Review of Development and Application of Digital Image Correlation Method for Study of Stress–Strain State of RC Structures. Applied Sciences, 12, 10157. DOI:10.3390/app121910157
- Blikharskyy, Y., Selejdak, J., 2021. Influence of the percentage of reinforcement damage on the bearing-capacity of RC beams. Construction of Optimized Energy Potential (CoOEP), 10(1), 145–150. DOI:10.17512/bozpe.2021.1.15
- Blikharskyy, Y., Selejdak, J., Kopiika, N., 2021a. Corrosion fatigue damages of rebars under loading in time. Materials, 14(12), 3416. DOI:10.3390/ma14123416
- Blikharskyy, Z., Sobol, K., Markiv, T., Selejdak, J., 2021b. Properties of Concretes Incorporating Recycling Waste and Corrosion Susceptibility of Reinforcing Steel Bars. Materials, 14(10), 2638. DOI: 10.3390/ma14102638
- Bouzid, H., Rabia, B., Daouadji, T.H., 2021. Deflection ductility of RC beams under mid-span load. Structural Engineering and Mechanics, 80(5), 585-594. DOI:10.12989/sem.2021.80.5.585
- Branson, D.E., 1965. Instantaneous and Time-Dependent Deflections on Simple and Continuous Reinforced Concrete Beams. Alabama Highway Department, Bureau of Public Roads: Montgomery, AL, USA, HPR Report No. 7, Part 1, 1–78.
- Campione, G., Ferrotto, M.F., Papia, M., 2020. Flexural Response of RC Beams Failing in Shear. Pract. Period. Struct. Des. Constr., 25(4): 04020028. DOI: 10.1061/(ASCE)SC.1943-5576.0000507
- Chen, M.T., Ho, J.C.M., 2015. Concurrent flexural strength and ductility design of RC beams via strain-gradient-dependent concrete stress–strain curve. Struct. Design Tall Spec. Build. 24, 629–652. DOI: 10.1002/tal.1203
- Cintron, R., Saouma, V., 2008. Strain measurements with the digital image correlation system Vic-2D. Boulder, Colorado. Available online: https://smtl.colorado.edu/Technical_Documents/37_Strain_Measurements_with_the_Digital_Image_Correlation_System_Vic-2D.pdf (accessed on 28 November, 2022).
- Cruz, H., Aval, S.F., Dhawan, K. Pourhomayoun, M., Rodriguez-Nik, T., Mazari, M., 2019. Non-Contact Surface Displacement Measurement for Concrete Samples Using Image Correlation Technique. In Proceedings of the 2019 International Conference on Image Processing, Computer Vision, & Pattern Recognition, Las Vegas, NV, USA, 29 July–1 August 2019; 151–156.
- Czajkowska, A., Raczkiewicz, W., Bacharz, M., Bacharz, K., 2020. Influence of maturing con-ditions of steel-fiber reinforced concrete on its selected parameters. Construction of Optimized Energy Potential (CoOEP), 9(1), 47-54. DOI: 10.17512/bozpe.2020.1.05
- Czajkowska, A., Raczkiewicz, W., Ingaldi, M., 2023. Determination of the linear correlation coefficient between Young’s modulus and the compressive strength in fibre-reinforced concrete based on experimental studies. Production Engineering Archives, 29(3), 288–297. DOI: 10.30657/pea.2023.29.33
- DBN V.2.6-98:2009. Structures of buildings and structures. Concrete and reinforced concrete structures. General provisions. Kyiv, Ministry of Regional Development of Ukraine, 2011.
- Devendiran, D.K., Banerjee, S., 2023. Contribution of vertical ground motion on seismic response of multi-span simply-supported T-girder RC bridges in the presence of corrosion-fatigue degradation. Engineering Structures, 294. DOI: 10.1016/j.engstruct.2023.116720
- Dizaji, M.S., Harris, D.K., Kassner, B., Hill, J.C., 2021. Full-field non-destructive image-based diagnostics of a structure using 3D digital image correlation and laser scanner techniques. J. Civ. Struct. Health Monit., 11, 1415–1428. DOI:10.1007/s13349-021-00516-6
- Dorofeyev, V., Pushkar, N., 2023. The Bearing-Capacity of Precast Beams with Vertical Contact Plane. Lecture Notes in Civil Engineering, 290 LNCE, 67–75. 10.1007/978-3-031-14141-6_7
- DSTU B V.1.2-3:2006 Deflections and displacements. Design requirements. Kyiv, Ministry of Regional Development of Ukraine, 2006.
- DSTU B V.2.6-156:2010 Structures of buildings and structures. Concrete and reinforced concrete structures made of heavy concrete. Design rules. Kyiv, Ministry of Regional Development of Ukraine, 2011.
- Eurocode 2: Design of concrete structures - Part 1-1 : General rules and rules for buildings, 2004.
- Haytham, B., Benferhat, R., Tahar, H. D., 2022. Estimation of ultimate deflection of RC beams using CASTEM software. Conference Paper. February 2022. International Aegean Conferences. Innovation Technologies & Engineering-V. February 25-26, 2022. IZMIR, TURKEY
- Hu, H., Lopes, S.M.R., Lopes, A.V., Lou, T., 2022. Flexural Response of Axially Restricted RC Beams: Numerical and Theoretical Study. Materials, 15, 6052. DOI: 10.3390/ma15176052
- Hunegnaw, C.B., Wondimu, T., 2021. Effect of orientation of stirrups in combination with shear span to depth ratio on shear capacity of RC beams, HELIYON, HLY 8193, S2405-8440(21)02296-9, 1-15. DOI:10.1016/j.heliyon.2021.e08193
- Ilnytskyy, B.M., Kramarchuk, A.P., Bula, S.S., Bobalo, T.V., 2019. Study of the vibration influence on load-bearing floor structures in case of machinery operation. IOP Conference Series: Materials Science and Engineering, 708(1), DOI: 012052. 10.1088/1757-899X/708/1/012052
- Jagusiak-Kocik, M., Ulewicz, R. 2023. Implementation of the QFD Method in a Construction Industry Company. Lecture Notes in Civil Engineering, 290 LNCE, 416–423. DOI: 10.1007/978-3-031-14141-6_42
- Katunský, D., Katunská, J., Tóth, S., 2015. Possibility of choices industrial hall object reconstruction. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 2(5), 389–396.
- Kim, S.-W., 2021. Prediction of Deflection of Shear-Critical RC Beams Using Compatibility-Aided Truss Model. Applied Sciences, 11, 11478. DOI: 10.3390/app112311478
- Kopiika, N., Selejdak, J., Blikharskyy, Y., 2022. Specifics of physico-mechanical characteristics of thermally-hardened rebar. Production Engineering Archives, 28(1), 73–81. DOI:10.30657/pea.2022.28.09 Kopiika N., Vegera P., Vashkevych R., Blikharskyy Z. 2021. Stress-strain state of damaged reinforced concrete bended elements at operational load level. Production Engineering Archives, 27(4), 242–247. DOI:10.30657/pea.2021.27.32
- Kos, Z., Klymenko, Y., Karpiuk, I., Grynyova, I., 2022. Bearing Capacity near Support Areas of Continuous Reinforced Concrete Beams and High Grillages. Applied Sciences, 12, 685. DOI:10.3390/app12020685
- Koteš, P., Kotula, P., Odrobiňák J., Prokop, J., 2022. Diagnostics and Evaluation of Two Atypical Girder Bridges on Railway Line. Key Engineering Materials, August 2022. DOI:10.4028/p-i418x0
- Koteš, P., Zahuranec, M., Vavruš, M., 2023. Diagnostic and Design of Reconstruction of Building Váhostav. Lecture Notes in Civil Engineering, 322 LNCE, 165–174. 10.1007/978-3-031-26879-3_13
- Kramarchuk, A., Ilnytskyy, B., Kopiika, N., 2023. Ensuring the Load-Bearing Capacity of Monolithic Reinforced Concrete Slab Damaged by Cracks in the Compressed Zone. EcoComfort, LNCE 290, 1–13, 2023. DOI:10.1007/978-3-031-14141-6_21
- Kramarchuk, A., Ilnytskyy, B., Lytvyniak, O., 2018. Arrangement of the foundations under the new hotel in Lviv. Matec Web of Conferences, 183, 139366. DOI: 10.1051/matecconf/201818302007.
- Kramarchuk, A., Ilnytskyy, B., Hladyshev, D., Lytvyniak, O., 2021. Strengthening of the reinforced concrete tank of anaerobic purification plants with the manufacture of biogas, damaged as a result of design and construction errors. IOP Conference Series: Materials Science and Engineering, 1021(1), 012017. DOI: 10.1088/1757-899X/1021/1/012017
- Lenkovskiy, T.M., Kulyk, V.V., Duriagina, Z.A., Kovalchuk, R.A., Topilnytskyy, V.H., Vira, V.V., Tepla, T.L., 2017. Mode I and mode II fatigue crack growth resistance characteristics of high tempered 65G steel. Archives of Materials Science and Engineering, 84(1), 34–41. DOI: 10.5604/01.3001.0010.3029
- Li, B., Zeng, L., Guo, X., Wang, Y., Deng, Z. 2022a. Flexural Behavior of Full-Scale Damaged Hollow RC Beams Strengthened with Prestressed SCFRP Plate under Four-Point Bending. Polymers, 14, 2939. DOI:10.3390/polym14142939
- Li, W., Huang, W., Fang, Y., Zhang, K., Zongzhi, Liu, Kong, Z., 2022b. Experimental and theoretical analysis on shear behavior of RC beams reinforced with GFRP stirrups. Structures, 46, 1753–1763. DOI: 10.1016/j.istruc.2022.10.138
- Li, W., Huang, Y., Jiang, Y., Shi, T., Xing, F., 2020. Application of DIC Technology to Shear Crack Measurement of Concrete Beam. In Advances in 3D Image and Graphics Representation, Analysis, Computing and Information Technology: Algorithms and Applications, Proceedings of IC3DIT; Springer: Berlin/Heidelberg, Germany, 180, 339–346. DOI:10.1007/978-981-15-3867-4_39
- Lipiński, T., 2023. The Role of the Distance between Fine Non-Metallic Oxide Inclusions on the Fatigue Strength of Low-Carbon Steel. Applied Sciences (Switzerland), 13(14), 8354. 10.3390/app13148354
- Lipiński, T., Ulewicz, R. 2023. Degradation of R35 Steel in 5% NaCl environment at 10°C. Materials Research Proceedings, 34, 77–86. DOI: 10.21741/9781644902691-10
- Lipiński, T., Wach, A., 2020. Influence of inclusions on bending fatigue strength coefficient the medium carbon steel melted in an electric furnace. Production Engineering Archives, 26(3), 88–91. DOI: 10.30657/pea.2020.26.18
- Malíková, L., Miarka, P., Šimonová, H., Kucharczyková, B., 2020. Deflection of an eccentric crack under mixed-mode conditions in an SCB specimen. Construction of Optimized Energy Potential (CoOEP), 9(2), 79-87. DOI: 10.17512/bozpe.2020.2.09
- Niezrecki, C., Baqersad, J., Sabato, A., 2018. Digital Image Correlation Techniques for Non-Destructive Evaluation and Structural Health Monitoring. Handb. Adv. Non-Destr. Eval., 1–46. Available online: https://cpb-usw2.wpmucdn.com/sites.uml.edu/dist/3/262/files/2019/09/Niezrecki-eral.-2019-Digital-image-correlation-techniques-for-NDE-and-SHM.pdf (accessed on 21 November, 2022).
- Ostash, O.P., Muravs’Kyi, L.I., Voronyak, T.I., Kmet’, A.B., Andreiko, I.M., Vira, V.V., 2011. Determination of the size of the fatigue prefracture zone by the method of phase-shifting interferometry. Materials Science, 46(6), 781–788. DOI:10.1007/s11003-011-9353-1
- Ostash, О.P., Kulyk, V.V., Poznyakov, V.D., Gaivorons’kyi, О.А., Vira, V.V., 2019. Influence of the Modes of Heat Treatment on the Strength and Cyclic Crack-Growth Resistance of 65G Steel. Materials Science, 54(6), 776–782. DOI: 10.1007/s11003-019-00263-6
- Pang, M., Shi, S., Hu, H., Lou, T., 2021. Flexural Behavior of Two-Span Continuous CFRP RC Beams. Materials, 14, 6746. DOI:10.3390/ma14226746
- Scanlon, A., Bischoff, P.H., 2008.Shrinkage restraint and loading history effects on deflections of flexural members. ACI Struct. J., 105(4), 498–506.
- Schreier, H., Orteu, J.J., Sutton, M.A., 2009. Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications; Springer Science & Business Media: New York, NY, USA, 2009; 322p.
- Semko, O., Filonenko, O., Yurin, O., Avramenko, Y., Mahas, N., 2023. Characteristic damages of reinforced concrete structures of the covering exposed to moisture. AIP Conference Proceedings, 2684, 030039. DOI: 10.1063/5.0120020
- Sengun, K., Arslan, G., 2022. Investigation of the parameters affecting the behavior of RC beams strengthened with FRP. Front. Struct. Civ. Eng. 16, 729–743. DOI: 10.1007/s11709-022-0854-9.
- Sharma, G., Sharma, S., Sharma, S.K., 2021. Non-destructive evaluation of steel and GFRP reinforced beams using AE and DIC techniques. Structural Engineering and Mechanics, 77(5), 637-650 DOI: 10.12989/sem.2021.77.5.637
- Song, L., Wang, L., Sun, H., Cui, C., Yu, Z., 2022. Fatigue Performance Prediction of RC Beams Based on Optimized Machine Learning Technology. Materials, 15, 6349. DOI:10.3390/ma15186349.
- Speckle Pattern Fundamentals. Correlated Solutions, Inc. Knowledgebase Technical Articles, 2021. 12p. Available online: https://correlated.kayako.com/article/38-speckle-pattern-fundamentals (accessed on 20 November, 2022).
- Vatulia, G.L., Smolyanyuk, N.V., Shevchenko, A.A., Orel, Y.F., Kovalov, M.O., 2020. Evaluation of the load-bearing capacity of variously shaped steel-concrete slabs under short term loading. IOP Conference Series: Materials Science and Engineering, 1002(1), 012007. DOI: 10.1088/1757-899X/1002/1/012007
- Vitaliy, D., Natalia, P., Hanna, Z., 2021. The Influence of Concrete Structure on the Destruction of Reinforced Concrete Bended Elements. Lecture Notes in Civil Engineering, 100 LNCE, 103–111. DOI: 10.1007/978-3-030-57340-9_13
- Yang, Z., Cheng, Z., Wang T., Sun, Y., Wang, Ch., Qu, J., Zhang, D., Li, Q., 2021. Study on the Optimal Prestress Level of RC Beams Reinforced with SMA Bars. Advances in Civil Engineering, 2021, 4545413, 1-12. DOI: 10.1155/2021/4545413
- Yuan, P., Xiao, L., Wang, X., Xu, G., 2021. Failure Mechanism of Corroded RC Beams Strengthened at Shear and Bending Positions. Engineering Structures, 240, 112382. DOI: 10.1016/j.engstruct.2021.112382
Language: English
Page range: 278 - 287
Submitted on: Feb 27, 2026
Accepted on: Apr 8, 2026
Published on: May 8, 2026
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Andrii Klym, Yaroslav Blikharskyy, Illia Lytvynenko, Jacek Selejdak, Dusan Katunsky, Volodymyr Gunka, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.