Effect of Fe and Mn on Corrosion Resistance of Recycled Self-hardening AlZn10Si8Mg Alloy
References
- Al-Alimi, S., Yusuf, N.K., Ghaleb, A.M., Lajis, M.A., Shamsudin, S., Zhou, W., Altharan, Y.M., Abdulwahab, H.S., Saif, Y., Didane, D.H., S T T, I., Adam, A., 2024. Recycling aluminium for sustainable development: A review of different processing technologies in green manufacturing. Results in Engineering, 29. DOI: 10.1016/j.rineng.2024.102566
- Arrabal, R., Mingo, B., Pardo, A., Mohedano, M., Matykina, E., Rodríguez, I., 2013. Pitting corrosion of rheocast A356 aluminium alloy in 3.5 wt.% NaCl solution. Corrosion Science, 73, 342-355. DOI: 10.1016/j.corsci.2013.04.023
- De la Fuente, D., Otero-Huerta, E., Morcillo, M., 2007. Studies of long-term weathering of aluminium in the atmosphere. Corrosion Science, 49, 3134-3148. DOI: 10.1016/j.corsci.2007.01.006
- Fracchia, E., Gobber, F.S., Rosso, M., 2021. Effect of Alloying Elements on the Sr Modification of Al-Si Cast Alloys. Metals, 11(2). DOI: 10.3390/met11020342
- Freitas, B.J.M.., Otani, L.B., Kiminami, C.S., Botta, W.J., Bolfarini, C., 2019. Effect of iron on the microstructure and mechanical properties of the spray-formed and rotary-swaged 319 aluminum alloy. The International Journal of Advanced Manufacturing Technology, 102, 3879-3894. DOI: 10.1007/s00170-019-03449-z
- Fu, J., Cui, K., 2022. Effect of Mn content on the microstructure and corrosion resistance of Al-Cu-Mg-Mn alloys. Journal of Alloys and Compounds, 896. DOI: 10.1016/j.jallcom.2021.162903
- Galevsky, G.V., Rudneva, V.V., Aleksandrov, V.S., 2018. Current state of the world and domectic aluminium production and consumption. IOP Conf. Series: Materials Science and Engineering, 411. DOI: 10.1088/1757-899X/411/1/012017
- Ma, Y., Wang, M., Liu, Y., Cai, B., 2022. Microstructures and corrosion behaviors of Al−6.5Si−0.45Mg−xSc casting alloy Trans. Nonferrous Met. Soc. China, 32, 424-435. DOI: 10.1016/S1003-6326(22)65804-7
- Michna, Š., Knaislová, A., Svobodová, J., Novotný, J., Michnová, L., 2024. Possibility of Eliminating Iron in Aluminium Alloy Through Sedimentation. Manufacturing Technology, 24(5). DOI: 10.21062/mft.2024.082
- Kamarska, K., 2019. Investigation of the Corrosion Behaviour of Aluminium Alloy in Selected Environments. Environment Technology Resources Proceedings of the International Scientific and Practical Conference, 3, 92-94. DOI: 10.17770/etr2019vol3.4191
- Kim, J., Shin, S., Lee, S., 2022. Correlation between microstructural evolution and corrosion resistance of hypoeutectic Al–Si–Mg alloy: Influence of corrosion product layer. Materials Characterization., 193. DOI: 10.1016/j.matchar.2022.112276
- Kuchariková, L., Liptáková, T., Tillová, E., Bonek, M., Medvecká, D., 2020. Corrosion Behaviour Correlation of the Secondary Aluminium Casts in Natural Atmosphere and Laboratory Conditions. Arch. Metall. Mater., 65(4), 1455-1462. DOI: 10.24425/amm.2020.133713
- Kuchariková, L., Pastierovičová, L., Tillová, E., Chalupová, M., Závodská, D., 2023. Investigation of Self-hardening AlZn10Si8Mg Cast Alloy for the Automotive Industry. Arch. Metall. Mater., 68(2), 517-524. DOI: 10.24425/amm.2023.142430
- Kuchariková, L., Pastierovičová, L., Tillová, E., Uhríčik, M., Zatkalíková, V., Šajgalík, M., 2023. The Influence of a Corrosive Environment on Fatigue and Mechanical Properties of An Al-Cast Alloy with Higher Fe Content. Metals., 13(6). DOI: 10.3390/met13061019
- Lazaro-Nebreda, J., Patel, J.B., Al-Helal, K., Gao, F., Stone, I., Chang, I.T.H., Scamans, G.M., Fan, Z., 2022. De-Ironing of Aluminium Alloy Melts by High Shear Melt Conditioning Technology: An Overview. Metals, 12(10), 1579. DOI: 10.3390/met12101579
- Nunes, H., Emadinia, O., Soares, R., Vieira, M.F., Reis, A., 2023. Adding Value to Secondary Aluminum Casting Alloys: A Review on Trends and Achievements. Materials, 16(3), 895. DOI: 10.3390/ma16030895
- Padamata, S.K., Yasinskiy, A., Polyakov, P., 2021. A Review of Secondary Aluminum Production and Its Byproducts. JOM, 73(9), 2603-2614. DOI: 1 10.1007/s11837-021-04802-y
- Panchal, H., Singh, S., Sharma, R., Solanki, K, Kahar, S, 2023. The effect of alloying additions on the structure and properties of Al-Mg-Zn-Si-Mn alloy: A review. International Journal of Scientific Development and Research (IJSDR), 8(3), 1256-1269.
- Peter, I., Castella, C., Molina, R., 2020. An innovative class of aluminum alloys for automotive industry: investigation on their corrosion resistance. IOP Conf. Ser.: Mater. Sci. Eng. 916. DOI: 10.1088/1757-899X/916/1/012082
- Piątkowski, J., Hejne, M., Wieszała, R., 2023. Influence of manganese content on the microstructure and properties of AlSi10MnMg(Fe) alloy for die castings. Archives of Materials Science and Engineering, 123(1), 5-12. DOI: 10.5604/01.3001.0053.9750
- Rosso, M., Peter, I., Castella, Ch., Molina, R., 2015. Optimization of composition for self-hardening AlZn10Si8Mg alloys. Materials Today: Proceedings, 2(10), 4949-4956. DOI: 10.1016/j.matpr.2015.10.066
- Ruiz-Garcia, A., Esquivel-Pena, V., Godínez, F.A., Montoya, R., 2024. Corrosion Modeling of Aluminum Alloys: A Brief Review. ChemElectro-Chem, 11(9). DOI: 10.1002/celc.202300712
- Sanchez, J.M., Arribas, M., Galarraga, H., de Cortaza, M.G., Ellero, M., Girot, F., 2023. Effects of Mn addittion, cooling rate and holding temperature on the modification and purification of iron-rich compounds in AlSi10MnMg(Fe) alloy. Heliyon, 9. DOI: 10.1016/j.heliyon.2023.e13005
- Soo, V.K., Peeters, J.R., Compston, P., Doolan, M., Duflou, J.R., 2019. Economic and Environmental Evaluation of Aluminium Recycling based on a Belgian Case Study. Procedia Manufacturing, 33, 639-646. DOI: 10.1016/j.promfg.2019.04.080
- Svobodova, J., Lunak, M., Lattner, M., 2019. Analysis of the Increased Iron Content on the Corrosion Resistance of the AlSi7Mg0.3 Alloy Casting. Manufacturing Technology, 19(6), 1041-1046. DOI: 10.21062/ujep /415.2019/a/1213-2489/MT/19/6/1041
- Šurdová, Z., Kuchariková, L., Tillová, E., Pastierovičová, L., Chalupová, M., Uhríčik, M., Mikolajčík, M., 2022. The Influence of Fe Content on Corrosion Resistance of secondary AlSi7Mg0.3 Cast Alloy with Increased Fe-content. Manufacturing Technology, 22(5), 598-604. DOI: 10.21062/mft.2022.073
- Vasconcelos, A., Azevedo, H., Barros, A., Rocha, O., Melo, M.M., 2021. Influence of the dendritic microstructure and β-Al5FeSi phase on the wear characteristics in a horizontally solidified Al-7Si-0.4Mg-1.2Fe alloy. Materials Today Communications, 26(1-2). DOI: 10.1016/j.mtcomm.2021.102099
- Varshney, D., Kumar, K., 2021. Application and use of different aluminium alloys with respect to workability, strength and welding parameter optimization. Ain Shams Engineering Journal, 12(1), 1143-1152. DOI: 10.1016/j.asej.2020.05.013
- Zhang, H., Yu, S., Yang, Z., Zhang, C., 2023. The influence of porosity and precipitates on the corrosion behavior of A356 aluminum alloy. Journal of Electroanalytical Chemistry, 948. DOI: 10.1016/j.jelechem. 2023.117796
- Zhao, J., Zhao, T., Zhang, Y., Zhang, Z., Chen, Z., Wang, J., Chen, M., 2024. Corrosion Behavior of the 2024 Aluminum Alloy in the Atmospheric Environment of the South China Sea Islands. Coatings, 14(3). DOI: 10.3390/coatings14030331
- Zhu, H., Leng, M., Jin, G., Miao, H., 2022. A Review of Research on Galvanic Corrosion of Aluminum Alloys. Fluid Dynamics & Materials Processing, 19(7), 1907-1923. DOI: 10.32604/fdmp.2023.025416
Language: English
Page range: 54 - 64
Submitted on: Sep 20, 2024
Accepted on: Nov 5, 2024
Published on: Feb 28, 2025
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2025 Martin Mikolajčík, Eva Tillová, Lenka Kuchariková, Zuzana Šurdová, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.