Comparative analysis of boiling heat transfer on surfaces modified with thermal and mechanical techniques
References
- Amanowicz, Ł., 2020. Controlling the thermal power of a wall heating panel with heat pipes by changing the mass flowrate and temperature of supplying water - experimental investigations, Energies, 13, 6547, DOI: 10.3390/en13246547
- Białek, A., Kargul, W., Stokowiec, K., 2023. Boiling heat transfer on porous single layer brass meshes. Journal of Physics: Conference Series, 2454, 012004, DOI: 10.1088/1742-6596/2454/1/012004
- Bogdanowicz, K. A., Lalik, S., Ratajczak, P., Katrusiak, A., Krysiak, P., Pawlowska, A. I., Marzec, M., Iwan, A., 2023. A new look at imines and their mixture with PC BM for organic, flexible photovoltaics, Scientific Reports, 13(1), art.13240, DOI: 10.1038/s41598-023-38978-x
- Chan, M.A., Yap, C.R., Ng, K.C., 2010. Pool boiling heat transfer of water on finned surfaces at near vacuum pressures. Journal of Heat Transfer, 132, 031501-1-6, DOI: 10.1115/1.4000054
- Dharmendra, M., Suresh, S., Hafiz, M.A., Udaya Kumar, G., 2020. Investigation to improve the pool boiling heat transfer characteristics using laser-textured copper-grooved surfaces, Int. J. Photoenergy, 3846157, DOI: 10.1155/2020/3846157
- Dudek, A., 2009. Surface properties in titanium with hydroxyapatite coating, Optica Applicata, 39(4), 825-831
- Dudek, A., 2011. Investigations of Microstructure and Properties in Bioceramic Coatings Used in Medicine, Archives of Metallurgy and Materials, 56(1), 135-140, DOI: 10.2478/v10172-011-0015-y
- Dudkiewicz, E., Fidorów-Kaprawy, N., Szałański, P., 2022. Environmental benefits and energy savings from gas radiant heaters’ flue-gas heat recovery, Sustainability, 14(13), 8013. DOI: 10.3390/su14138013
- Dwornicka, R., 2014. The Impact of the Power Plant Unit Start-Up Scheme on the Pollution Load, Terotechnology, 874, 63-69, DOI: 10.4028/www.scientific.net/AMR.874.63
- Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model, Metal 2017: 26th International Conference on Metallurgy and Materials, 1252-1257
- Hosseini, R., Gholaminejad, A., Jahandar, H., 2011. Roughness effects on nucleate pool boiling of R-113 on horizontal circular copper surfaces, World Academy of Science, Engineering and Technology, 55, 679 - 684, 2011.
- Hożejowska, S., Kaniowski, R., Pastuszko, R., 2021. Application of the Trefftz method for pool boiling heat transfer on open microchannel surfaces, Heat Transfer Engineering, 43(3-5), 362-370, DOI: 10.1080/01457632.2021.1874669
- Jones, B.J., McHale, J.P., Garimella, S.V., 2009. The Influence of Surface Roughness on Nucleate Pool Boiling Heat Transfer, Journal of Heat Transfer, 131(12), 121009. DOI: 10.1115/1.3220144
- Kaniowski, R., Pastuszko, R., 2021. Boiling of FC-72 on surfaces with open copper microchannel, Energies, 14, 7283. DOI: 10.3390/en14217283
- Khan, S.A., Atieh, M.A., Koç, M., 2018. Micro-Nano Scale Surface Coating for Nucleate Boiling Heat Transfer: A Critical Review, Energies, 11, 3189; doi:10.3390/en11113189
- Kosiń, M., Major, I., Major, M., Kalinowski J., 2020. Model tests of bending and torsional deformations of thin-walled profiles stiffened with elements made in 3D printing technology, Case Studies in Construction Materials, 13, e00401, DOI: 10.1016/j.cscm.2020.e00401
- Kotrys-Działak, D., Stokowiec, K., 2023. Temperature distribution analysis on the surface of the radiator: infrared camera and thermocouples results comparison, Rocznik Ochrona Środowiska, 25, 37-44, DOI: 10.54740/ros.2023.005
- Krysiak, P., Owczarek, R., Błażejewski, W., Błachut, A., 2020. Strength testing and ring stiffness testing of underground composite pressure pipes, Materials Research Proceedings, 17, 191-202, DOI: 10.21741/9781644901038-29
- Krysiak, P., Szczepaniak, M., Wojcieszyńska, P., Jasiński, W., 2020. Strength testing of a composite mounting frame for a multi-sensor detection system, Materials Research Proceedings, 17, 165-170, DOI: 10.21741/9781644901038-25
- Major, I., Major, M., 2014. Modeling of wave propagation in the ADINA software for simple elastic structures, Advanced Materials Research, 1020, 171-176. DOI: 10.4028/www.scientific.net/AMR.1020.171
- Medriosa, H., Zaidir, Z., Tanjung, J., Maidiawati, M., 2024. An Analytical Model of Walls with Openings Variation Using the Diagonal Strut Method, Civil and Environmental Engineering, 20(1), 137 - 147, DOI:10.2478/cee-2024-0012
- Meena, C.S., Kumar, A., Roy, S., Cannavale, A., Ghosh, A., 2022. Review on Boiling Heat Transfer Enhancement Techniques. Energies, 15, 5759. DOI: 10.3390/en15155759
- Nešović, A., Kowalik, R., 2025. Single-glazed vacuum tube collector with SnAl2O3 selective flat absorber plate and gravity single-stage direct water flow: a comprehensive geometric optimization, Applied Science, 15, 1838, DOI: 10.3390/app15041838
- Nešovič, A., Kowalik, R., Bojovič, M., Janaszek, A., Adamczak, S., 2024. Elevational Earth-sheltered buildings with horizontal overhang photovoltaic-integrated panels — new energy-plus building concept in the territory of Serbia, Energies, 17, 2100. DOI: 10.3390/en17092100
- Nirgude, V.V., Sahu, S.K., 2018. Enhancement in nucleate pool boiling heat transfer on nano-second laser processed copper surfaces, Experimental Heat Transfer, 566-583, DOI: 10.1080/08916152.2018.1559262
- Orman, Ł.J., 2016. Enhancement of pool boiling heat transfer with pin-fin microstructures, Journal of Enhanced Heat Transfer, 23(2), 137-153, DOI: 10.1615/JEnhHeatTransf.2017019452
- Orman, Ł.J., Radek, N., Honus, S., Pietraszek, J. 2024. Application of laser treatment technology for boiling heat transfer augmentation, Production Engineering Archives, 30(2), 259-265. DOI: 10.30657/pea.2024.30.25
- Orman, L. J., Radek, N., Pietraszek, J., Szczepaniak, M., 2020. Analysis of Enhanced Pool Boiling Heat Transfer on Laser-Textured Surfaces, Energies, 13(11), art.2700, DOI: 10.3390/en13112700
- Orman, Ł.J., Radek, N., Pietraszek, J., Wojtkowiak, J., Szczepaniak, M. 2023. Laser treatment of surfaces for pool boiling heat transfer enhancement, Materials, 16, 1365, DOI: 10.3390/ma16041365
- Orzechowski, T., 2009. Boiling heat transfer on the fin with laser modified surface, International Symposium on Convective Heat and Mass Transfer in Sustainable Energy, Tunisia, 1–14 DOI: 10.1615/ICHMT.2009.CONV.1110
- Orzechowski, T., 2017. Boiling on fins with wire screen of variable effective conductivity, EPJ Web of Conferences, 143, 02085, DOI: 10.1051/epjconf/201714302085
- Orzechowski, T., Wciślik, S., 2024. Effect of heating surface geometry on the droplets evaporation under Leidenfrost conditions, Rocznik Ochrona Środowiska, 26, 115-127, DOI: 10.54740/ros.2024.012
- Pastuszko, R., Kaniowski, R., 2016. Visualization of pool boiling on plain micro-fins and micro-fins with sintered perforated foil, Journal of Physics: Conference Series, 745, 032137, DOI: 10.1088/1742-6596/745/3/032137
- Piasecka, M., Hożejowska, S., Maciejewska, B., Pawińska, A., 2021. Time-dependent heat transfer calculations with Trefftz and Picard methods for flow boiling in a mini-channel heat sink, Energies, 14 (7), 1832, DOI: 10.3390/en14071832
- Pietraszek, J., 2003. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator, Neural Networks and Soft Computing, 250-255, DOI: 10.1007/978-3-7908-1902-1_35
- Pietraszek, J., Goroshko, A., 2014. The Heuristic Approach to the Selection of Experimental Design, Model and Valid Pre-Processing Transformation of DoE Outcome, Adv. Mat. Res., 874, 145-149, DOI: 10.4028/www.scientific.net/AMR.874.145
- Pietraszek, J., Skrzypczak-Pietraszek, E., 2014. The Optimization of the Technological Process with the Fuzzy Regression, Adv. Mat. Res., 874, 151-+, DOI: 10.4028/www.scientific.net/AMR.874.151
- Poniewski, M.E., Thome J.R., 2008. Nucleate boiling on micro-structured surfaces, Heat Transfer Research Inc. (HTRI, USA), Warsaw&Lausanne. Przybyl, W., Januszko, A., Radek, N., Szczepaniak, M., Bogdanowicz, K. A.,
- Plebankiewicz, I., Szczodrowska, B., Mazurczuk, R., 2023. Microwave absorption properties of carbonyl iron-based paint coatings for military applications, Defence Technology, 22, 1-9, DOI: 10.1016/j.dt.2022.06.013
- Radek, N., 2009. Determining the operational properties of steel beaters after electrospark deposition, Eksploatacja i Niezawodność - Maintenance and Reliability, 4, 10-16, 2009.
- Radek, N., Michalski, M., Mazurczuk, R., Szczodrowska, M. B., Plebankiewicz, I., Szczepaniak, M., 2023. Operational tests of coating systems in military technology applications, Eksploatacja i Niezawodność - Maintenance and Reliability, 25, 1, 1-13, DOI: 10.17531/ein.2023.1.12
- Ratajczak, K., Bandurski, K., Płociennik, A., 2022. Incorporating an atrium as a HAVC element for energy consumption reduction and thermal comfort improvement in a Polish climate, Energy and Buildings, 277, 112592, DOI: 10.1016/j.enbuild.2022.112592
- Ratajczyk, P., Katrusiak, A., Bogdanowicz, K. A., Przybył, W., Krysiak, P., Kwak, A., Iwan, A., 2022. Mechanical strain, thermal and pressure effects on the absorption edge of an organic charge-transfer polymer for flexible photovoltaics and sensors, Materials Advances, 3(6), 2697-2705, DOI: 10.1039/d1ma01066b
- Ratajczak, K., Szczechowiak, E., 2020. The use of a heat pump in a ventilation unit as an economical and ecological source of heat for the ventilation system of an indoor swimming pool facility, Energies, 13, 6695, DOI: 10.3390/en13246695
- Ribatski, G., Saiz Jabardo, J.M., 2003. Experimental study of nucleate boiling of halocarbon refrigerants on cylindrical surfaces, Int. J of Heat and Mass Transfer, 46, 4439 – 4451, DOI: 10.1016/S0017-9310(03)00252-7
- Sikora, M., Bohdal, T., Tandecka, K., Kacalak,W., Mathia, T.G., 2024. The Effect of Channel Surface Roughness on Two–Phase Flow Patterns: A Review, Energies, 17, 5483. https://doi.org/10.3390/en17215483
- Smirnov, G. F., 1977. Približennaja teorija teploobmena pri kipenii na poverchnostjach pokrytych kapilljarno-Poristymi strukturami. Teploenergetika, 9, 77–80.
- Strąk, E., Pastuszko, R., Kłosowiak, R., Urbaniak, R., 2015. Study of heat transfer during pool boiling on minifins surface coated with carbon nano-tubes, Transactions IFFM, 128, 59–72.
- Styrylska, T., Pietraszek, J., 1992. Numerical Modeling of Non-Steady-State Temperature-Fields with Supplementary Data, Zeitschrift für Angewandte Mathematik und Mechanik, 72(6), T537-T539
- Wciślik, S., Taler, D., 2024. Economic and exergy analysis of TiO2 + SiO2 ethylene-glycol-based hybrid nanofluid in plate heat exchange system of solar installation, Energies, 17(13), 3107, DOI: 10.3390/en17133107
- Xin, M.-D., Chao, Y.-D., 1987. Analysis and experiment of boiling heat transfer on T-shaped finned surfaces, Chem. Eng. Commun., 50, 185–199. Yin, L., Zhang, K., Qin, T., Ma, W., Jia, L., 2025. Boiling bubble behaviors of fluids of different surface tensions on heating surfaces with micro/nanostructures, Physics of Fluids, 37, 012114, DOI: 10.1063/5.0249380
- Yu, C. K., Lu, D. C., 2007. Pool boiling heat transfer on horizontal rectangular fin array in saturated FC-72, International Journal of Heat and Mass Transfer, 50, 3624 – 3637. DOI: 10.1016/j.ijheatmasstransfer.2007.02.003
- Zhou, F., Zhou, J., Li, X., Chen, Q., Huai, X., 2023. Enhanced capillary-driven thin film boiling on cost-effective gradient wire meshes for high-heat-flux applications, Experimental Thermal and Fluid Science, 149, 111018, DOI: 10.1016/j.expthermflusci.2023.111018
- Zórawski, W., Chatys, R., Radek, N., Borowiecka-Jamrozek, J., 2008. Plasma-sprayed composite coatings with reduced friction coefficient, Surface & Coatings Technology, 202(18), 4578-4582, DOI: 10.1016/j.surfcoat.2008.04.026
Language: English
Page range: 401 - 409
Submitted on: May 25, 2025
Accepted on: Sep 4, 2025
Published on: Sep 26, 2025
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2025 Łukasz J. Orman, Norbert Radek, Stanislav Honus, Jacek Pietraszek, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.