Comparison of tribological and corrosion characteristics of AISI 316Ti and AISI 430 stainless steels
References
- Alaskari, A., Liptakova, T., Fajnor, P., Halamova, M., 2014. Mechanical surface treatments effects on corrosion of AISI 316 Ti stainless steel in chlo-ride environments. Journal of Engineering Research, 2, 1-17. DOI: 10.7603/s40632-014-0020-1
- Alkan, S., Gök, M. S., 2021. Effect of sliding wear and electrochemical potential on tribocorrosion behaviour of AISI 316 stainless steel in sea-water. Engineering Science and Technology, an International Journal, 24(2), 524-532. DOI: 10.1016/j.jestch.2020.07.004
- Bailey, R., Sun, Y., 2023. Corrosive-Wear Performance of Grade 316 Stainless Steel Sliding Against Grade 316 Stainless Steel in NaCl Solution. Journal of Materials Engineering and Performance, 1-13. DOI: 10.1007/s11665-023-09065-z
- Borko, K., Pastorek, F., Hadzima, B., 2017. Electrochemical Corrosion Characteristics of High Strength Low Alloy Domex 700 Steel After Mechanical Surface Treatment in Chloride Environment. KOM–Corrosion and Material Protection Journal, 61(5), 162-168. DOI: 10.1515/kom-2017-0020
- Bronček, J., Dzimko, M., Hadzima, B., Takeichi, Y., 2014. Experimental investigations of aluminium alloys 2024–T 3 form in terms of tribocorrosion characteristics. Acta Metallurgica Slovaca, 20(1), 97-104. DOI: 10.12776/ams.v20i1.273
- Cramer, S. D., Covino, B. S., 2003. ASM handbook volume 13a: corrosion: fundamentals, testing and protection. Ohio: Materials Park, Ohio, USA.
- Diomidis, N., Celis, J. P., Ponthiaux, P., Wenger, F., 2010. Tribocorrosion of stainless steel in sulfuric acid: Identification of corrosion–wear components and effect of contact area. Wear, 269(1-2), 93-103. DOI: 10.1016/j.wear.2010.03.010
- Diomidis, N., Göçkan, N., Ponthiaux, P., Wenger, F., Celis, J. P., 2009. Assessment of the surface state behaviour of Al71Cu10Fe9Cr10 and Al3Mg2 complex metallic alloys in sliding contacts. Intermetallics, 17(11), 930-937. DOI: 10.1016/j.intermet.2009.04.003
- Fajnor, P., Liptáková, T., Konstantová, V., 2010. Influence of AISI 316TI stainless steel surface treatment on pitting corrosion in various solutions. Materials Engineering, 17(3), 21-27.
- Fellah, M., Labaïz, M., Assala, O., Iost, A., Dekhil, L., 2013. Tribological behaviour of AISI 316L stainless steel for biomedical applications. Tribology-Materials, Surfaces & Interfaces, 7(3), 135-149. DOI: 10.1179/1751584X13Y.0000000032
- Fritz, J., 2020. Practical guidelines for the fabrication of austenitic stainless steels. International Molybdenum Association, London, UK.
- Gudić, S., Nagode, A., Šimić, K., Vrsalović, L., Jozić, S., 2022. Corrosion behavior of different types of stainless steel in PBS solution. Sustainability, 14(14), 8935. DOI: 10.3390/su14148935
- Hiromoto, S., Mischler, S., 2006. The influence of proteins on the fretting– corrosion behaviour of a Ti6Al4V alloy. Wear, 261(9), 1002-1011. DOI: 10.1016/j.wear.2006.03.032
- Hu, J., Zeng, Q., 2022. Friction and wear in nanoscratching of single crystals: effect of adhesion and plasticity. Nanomaterials, 12(23), 4191. DOI: 10.3390/nano12234191
- Jegdić, B., Dražić, D. M., Popić, J. P., 2008. Open circuit potentials of metallic chromium and austenitic 304 stainless steel in aqueous sulphuric acid solution and the influence of chloride ions on them. Corrosion Science, 50(5), 1235-1244. DOI: 10.1016/j.corsci.2008.01.012
- Ji, X., Luo, C., Jin, J., Zhang, Y., Sun, Y., Fu, L., 2022. Tribocorrosion performance of 316L stainless steel enhanced by laser clad 2-layer coating using Fe-based amorphous powder. Journal of Materials Research and Technology, 17, 612-621. DOI: 10.1016/j.jmrt.2022.01.046
- Jun, C., Yan, F. Y., 2012. Tribocorrosion behaviors of Ti–6Al–4V and Monel K500 alloys sliding against 316 stainless steel in artificial seawater. Transactions of Nonferrous Metals Society of China, 22(6), 1356-1365. DOI: 10.1016/S1003-6326(11)61326-5
- Jun, C., Zhang, Q., Li, Q. A., Fu, S. L., Wang, J. Z., 2014. Corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys in artificial seawater. Transactions of nonferrous metals society of China, 24(4), 1022-1031. DOI: 10.1016/S1003-6326(14)63157-5
- Leu, D. K., 2011. Evaluation of friction coefficient using indentation model of Brinell hardness test for sheet metal forming. Journal of mechanical science and technology, 25, 1509-1517. DOI: 10.1007/s12206-011-0134-4
- Li, D. G., Wang, J. D., Chen, D. R., Liang, P., 2015. Influence of molybdenum on tribo-corrosion behavior of 316L stainless steel in artificial saliva. Journal of Bio-and Tribo-Corrosion, 1, 1-9. DOI: 10.1007/s40735-015-0014-z
- Liu, E., Zhang, Y., Zhu, L., Zeng, Z., Gao, R., 2017. Effect of strain-induced martensite on the tribocorrosion of AISI 316L austenitic stainless steel in seawater. Rsc Advances, 7(71), 44923-44932. DOI: 10.1039/C7RA07318F
- Lopez-Ortega, A., Bayón, R., Arana, J. L., Arredondo, A., Igartua, A., 2018. Influence of temperature on the corrosion and tribocorrosion behaviour of High-Strength Low-Alloy steels used in offshore applications. Tribology International, 121, 341-352. DOI: 10.1016/j.triboint.2018.01.049
- Maher, M., Iraola-Arregui, I., Youcef, H. B., Rhouta, B., Trabadelo, V., 2022. The synergistic effect of wear-corrosion in stainless steels: A review. Materials Today: Proceedings, 51, 1975-1990. DOI: 10.1016/j.matpr. 2021.05.010
- Munoz, A. I., Espallargas, N., Mischler, S., 2020. Tribocorrosion. Springer International Publishing, Cham, Switzerland.
- Murkute, P., Pasebani, S., Isgor, B. O., 2020. Metallurgical and electrochemical properties of super duplex stainless steel clads on low carbon steel substrate produced with laser powder bed fusion. Scientific Reports, 10(1), 10162. DOI: 10.1038/s41598-020-67249-2
- Neslušan, M., Bronček, J., Minárik, P., Čapek, J., Vicen, M., Drbúl, M., 2022. Friction and wear of AISI 304 by the SiC ball and its monitoring via Barkhausen noise emission. Wear, 510, 204492. DOI: 10.1016/j.wear.2022.204492
- Obadele, B. A., Andrews, A., Shongwe, M. B., Olubambi, P. A., 2016. Tribocorrosion behaviours of AISI 310 and AISI 316 austenitic stainless steels in 3.5% NaCl solution. Materials Chemistry and Physics, 171, 239-246. DOI: 10.1016/j.matchemphys.2016.01.013
- Olsson, C. O., Landolt, D., 2003. Passive films on stainless steels—chemistry, structure and growth. Electrochimica acta, 48(9), 1093-1104. DOI: 10.1016/S0013-4686(02)00841-1
- Parker, M. E., Horton, D. J., Wahl, K. J., 2022. Tribocorrosion behavior of 2205 duplex stainless steel in sodium chloride and sodium sulfate environments. Tribology Letters, 70(3), 70. DOI: 10.1007/s11249-022-01601-7
- Pastorek, F., Borko, K., Dundeková, S., Fintová, S., Hadzima, B., 2016. Electrochemical corrosion characteristics of phosphated S355J2 steel in sul-fate environment. KOM–Corrosion and Material Protection Journal, 60(4), 107-113. DOI: 10.1515/kom-2016-0017
- Piotrowska, K., Madej, M., 2022. Influence of Thin Coatings Formed by ALD Techniques on the Properties of Ti13Nb13Zr Titanium Alloy. Tribologia. DOI: 10.5604/01.3001.0015.8985
- Sun, Y., Rana, V., 2011. Tribocorrosion behaviour of AISI 304 stainless steel in 0.5 M NaCl solution. Materials Chemistry and Physics, 129(1-2), 138-147. DOI: 10.1016/j.matchemphys.2011.03.063
- Tan, L., Wang, Z., Ma, Y., 2021. Tribocorrosion behavior and degradation mechanism of 316L stainless steel in typical corrosive media. Acta Metallurgica Sinica (English Letters), 34, 813-824. DOI: 10.1007/s40195-020-01182-1
- Zatkalíková, V., Podhorský, Š., Štrbák, M., Liptáková, T., Markovičová, L., Kuchariková, L., 2022. Plasma electrolytic polishing—An ecological way for increased corrosion resistance in austenitic stainless steels. Materials, 15(12), 4223. DOI: 10.3390/ma15124223
- Zatkalíková, V., Uhríčik, M., Markovičová, L., Pastierovičová, L., Kuchariková, L., 2023. The Effect of Sensitization on the Susceptibility of AISI 316L Biomaterial to Pitting Corrosion. Materials, 16(16), 5714. DOI: 10.3390/ma16165714
- Zhang, B., Wang, J., Zhang, Y., Han, G., Yan, F., 2016. Comparison of tribocorrosion behavior between 304 austenitic and 410 martensitic stainless steels in artificial seawater. Rsc Advances, 6(109), 107933-107941. DOI: 10.1039/C6RA18497A
- Zhang, Y., Zhang, Y., Wen, L., Kong, W., Yang, Y., Zhu, J., Jin, Y., 2022. Study of Temperature on the Corrosion Behavior of Antibacterial Steel by a Large− Scale Multiphase Flow Corrosion Test Loop. Materials, 15(21), 7472. DOI: 10.3390/ma15217472
Language: English
Page range: 565 - 576
Submitted on: Oct 1, 2024
Accepted on: Nov 8, 2024
Published on: Nov 21, 2024
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2024 Dávid Čuchor, Jozef Bronček, Veronika Obertová, Mário Drbúl, Norbert Radek, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.