Mass reduction method for topology optimisation of a Ti6Al4V part for additive manufacturing
By: László Dániel Erőss
and Tamás Markovits
and Tamás Markovits References
- Ahmed, S., Gupta, M. K., 2022. Investigations on motorbike frame material and comparative analysis using generative design and topology optimization. Materials Today: Proceedings [online], 2022, 56(3), p. 1440-1446. ISSN 2214-7853. DOI: 10.1016/j.matpr.2021.12.040
- Alzyod, H., Ficzere, P., 2023. Correlation Between Printing Parameters and Residual Stress in Additive Manufacturing: A Numerical Simulation Approach. Production Engineering Archives, 29(3), 279-287. DOI: 10.30657/pea.2023.29.32
- Armstrong, M., Mehrabi, H., Naveed, N., 2022. An overview of modern metal additive manufacturing technology. Journal of Manufacturing Processes 84 pp. 1001–1029. DOI: 10.1016/j.jmapro.2022.10.060
- Calignano, F., Mercurio V., 2023. An overview of the impact of additive manufacturing on supply chain, reshoring, and sustainability. Cleaner Logistics and Supply Chain 7, 1-10. DOI: 10.1016/j.clscn.2023.100103
- Chauhan, P., Sah K., Kaushal, R., 2020. Design, modelling and simulation of suspension geometry for formula student vehicles. Materials Today: Proceedings, 2021, 43(1), p. 17-27. ISSN 2214-7853. DOI: 10.1016/j.matpr.2020.11.200
- Dhokia, V., Essink, W. P., Flynn, J. M., 2017. A generative multi-agent design methodology for additively manufactured parts inspired by termite nest building. CIRP Annals, 2017, 66(1), p. 153-156. ISSN 0007-8506. DOI: 10.1016/j.cirp.2017.04.039
- Djokikj, J., Jovanova, J., 2021. Generative design of a large-scale nonhomogeneous structures. IFAC PapersOnLine. 2021, 54(1), p. 773-779. ISSN 2405-8963. DOI: 10.1016/j.ifacol.2021.08.090
- Djokikj, J., Kandikjan, T., 2023. DfAM: Application of the design rules in the early design stages. Procedia CIRP 118 (2023) 659-663. DOI: 10.1016/j.procir.2023.06.113
- Gupta, A., Soni, V., Shah, D., Lakdawala Ab., 2022. Generative design of main landing gear for a remote-controlled aircraft. Materials Today: Proceedings. DOI: 10.1016/j.matpr.2023.01.380
- Hanush, S. S., Manjaiah, M., 2022. Topology optimization of aerospace part to enhance the performance by additive manufacturing process. Materials Today: Proceedings 62, pp. 7373–7378. DOI: 10.1016/j.matpr.2022.02.074
- Jang, S., Yoo, S., Kang, N., 2022. Generative Design by Reinforcement Learning: Enhancing the Diversity of Topology Optimization Designs. Computer-Aided Design 146 (2022) 103225. DOI: 10.1016/j.cad.2022.103225
- Junk, S., Burkart, L., 2021. Comparison of CAD systems for generative design for use with additive manufacturing. Procedia CIRP 100 (2021) 577-582. DOI: 10.1016/j.procir.2021.05.126
- Junk, S., Rothe, N., 2022. Lightweight design of automotive components using generative design with fiber-reinforced additive manufacturing. Procedia CIRP 109 (2022) 119-124. DOI: 10.1016/j.procir.2022.05.224
- Kaushal, R., Chauhan, P., Sah K., Chawla, V. K., 2021. Design and analysis of wheel assembly and anti-roll bar for formula SAE vehicle. Materials Today: Proceedings. 2021, 43(1), 169-174. ISSN 2214-7853. DOI: 10.1016/j.matpr.2020.11.610
- Khan, S., Awan, M. J., 2018. A generative design technique for exploring shape variations. Advanced Engineering Informatics. 2018, 38, p. 712-724. ISSN 1474-0346. DOI: 10.1016/j.aei.2018.10.005
- Ficzere, P., 2022. The Impact of the Positioning of Parts on the Variable Production Costs in the Case of Additive Manufacturing. Periodica Polytechnica Transportation Engineering, 2022, 50(3), pp. 304-308. DOI: 10.3311/PPtr.15827
- Kumar, Y., Siddiqui, A., Upadhyay, Y., Prajapati, S., 2022. Kinematic and structural analysis of independent type suspension system with anti-roll bar for formula student vehicle. Materials Today: Proceedings, 2022, 56(5), 2672-2679. ISSN 2214-7853. DOI: 10.1016/j.matpr.2021.09.247
- Ling, S., Li, W., Zheng, L., Wan, C., Liu Y., 2023. Multidisciplinary collaborative topology optimization method for perforated plates. Engineering Structures 297 (2023) 116924. DOI: 10.1016/j.engstruct.2023.116924
- Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. L., Cheng, L., Liang, X., To A. C., 2018. Current and future trends in topology optimization for additive manufacturing, Structural and Multidisciplinary Optimization, 2018, 57, p. 2457-2483. ISSN 1615-147X, eISSN 1615-1488. DOI: 10.1007/s00158-018-1994-3
- Mesicek, J., Pagac, M., Petru, J., Novak, P., Hajnys, J., Kutiova, K., 2019. Topological optimization of the formula student bell crank. MM Science Journal, 2019, October, p. 2964-2968. ISSN 1803-1269, eISSN 1805-0476. DOI: 10.17973/MMSJ.2019_10_201893
- Rajput, S., Burde, H., Singh, U. S., Kajaria, H., Bhagchandani, R. K., 2021. Optimization of prosthetic leg using generative design and compliant mechanism. Materials Today: Proceedings. 2021, 46, p. 8708-8715. ISSN 2214-7853. DOI: 10.1016/j.matpr.2021.04.026
- Salta, S., Papavasileiou, N., Pyliotis, K., Katsaros, M, 2020. Adaptable emergency shelter: a case study in generative design and additive manufacturing in mass customization era. Procedia Manufacturing, 2020, 44, p. 124-131. ISSN 2351-9789. DOI: 10.1016/j.promfg.2020.02.213
- Venugopal, V., Anand, S., 2023. Structural and Thermal Generative Design using Reinforcement Learning Based Search Strategy for Additive Manufacturing. Manufacturing Letters 35 (2023) 564-575. DOI: 0.1016/j.mfglet.2023.08.030
- Vlah, D., Žavbi, R., Vukašinović, N., 2020. Evaluation of topology optimization and generative design tools as support for conceptual design. International Design Conference – Design 2020, pp. 451-460 DOI: 10.1017/dsd.2020.165
- Walton, D., Moztarzadeh, H., 2017. Design and development of an additive manufactured component by topology optimization. Procedia CIRP, 2017, 60, p. 205-210. ISSN 2212-8271. DOI: 10.1016/j.procir.2017.03.027
- Yi, L., Ehmsen, S., Glatt, M., Aurich, J. C., 2021. A case study on the part optimization using eco-design for additive manufacturing based on energy performance assessment. Procedia CIRP [online], 2021, 96, p. 91-96. ISSN 2212-8271. DOI: 10.1016/j.procir.2021.01.058
- Zhu, J., Zhou, H., Wang, C., Zhou, L., Yuan, S., Zhang, W., 2021. A review of topology optimization for additive manufacturing. Status and challenges. Chinese Journal of Aeronautics, 34 (1), pp. 91–110. DOI: 10.1016/j.cja.2020.09.020
Language: English
Page range: 354 - 360
Submitted on: Oct 17, 2024
Accepted on: May 8, 2024
Published on: Sep 7, 2024
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2024 László Dániel Erőss, Tamás Markovits, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.