The photogrammetric approach in conical picks wear rate evaluation
References
- Ahmed, S., 2019. Hardfaced wear-resistant coatings for mining tools, Master’s Thesis, Tampere University, Tampere, Finland.
- Bembenek, M., Prysyazhnyuk, P., Shihab, T., Machnik, R., Ivanov, O., Ropyak, L., 2022. Microstructure and wear characterization of the Fe-Mo-B-C — based hardfacing alloys deposited by flux-cored arc welding, Materials, 15, 5074. DOI: 10.3390/ma15145074
- Bembenek, M., Krawczyk, J., Zagórski, K., Pawlik, J., 2023. On the Wear Mechanism of High-Chromium Gyratory Crusher Mantle Lining in Terms of the Assessment of the Used Material, Tribologia, 1, 27-40. DOI: 10.5604/01.3001.0016.2931
- Biały, W., 2016. Determination of workloads in cutting head of longwall tumble heading machine. Management Systems in Production Engineering 1, 21, 45-54. DOI: 10.12914/MSPE-08-01-2016
- Biały, W., 2017. Application of quality management tools for evaluating the failure frequency of cutter-loader and plough mining systems. Archives of Minning Sciences, 62, 2, 243-252. DOI: 10.1515/amsc-2017-0018
- Biały, W., Fries, J., Galecki G., 2021. Determination of Coal Cutting Forces Using the Cutting Head of POU-BW/01-WAP Device. Management Systems in Production Engineering 4, 1, 281-289. DOI: 10.2478/mape-2021-0025.
- Bołoz, Ł. 2019. Directions for increasing conical picks’ durability. New Trends Prod. Eng., 2, 277–286. DOI: 10.2478/ntpe-2019-0029
- Bołoz, Ł., Kalukieiwcz, A., Galecki, G., Romanyshyn, L., Romanyshyn, T., Barrionuevo Giménez, R. 2020. Conical Pick Production Process. New Trends Prod. Eng., 3, 231-240. DOI: 10.2478/ntpe-2020-0019
- Bołoz, Ł., Biały, W., 2023. Methods and test benches for cutting tools testing — A review, Energies, 16, 445. DOI: 10.3390/en16010445
- Chinnasamy, M., Rathanasamy, R., Palaniappan, S.K., Pal, S.K., 2023. Microstructural transformation analysis of cryogenic treated conical rock cutting bits for mining applications, International Journal of Refractory Metals and Hard Materials, 110, 105995. DOI: 10.1016/j.ijrmhm.2022.105995
- Cleary, P. W., Sinnott, M. D., Morrison, R. D., Cummins, S., Delaney, G. W., 2017. Analysis of cone crusher performance with changes in material properties and operating conditions using DEM, Minerals Engineering, 100, 49–70. DOI: 10.1016/j.mineng.2016.10.005
- Collins, T., Woolley, S.I., Gehlken, E., Chang, E., 2019. Automated low-cost photogrammetric acquisition of 3D models from small form-factor arte-facts, Electronics, 8, 1441. DOI: 10.3390/electronics8121441
- Dabove, P., Grasso, N., Piras, M., 2019. Smartphone-based photogrammetry for the 3D modeling of a geomorphological structure, Applied Science, 9, 3884. DOI: 10.3390/app9183884
- Dewangan, S., Chattopadhyaya, S., Hloch, S., 2015. Wear assessment of conical pick used in coal cutting operation, Rock Mechanics and Rock Engineering 48, 2129–2139. DOI: 10.1007/s00603-014-0680-z
- Jeong, H., Choi, S., Lee, Y.-K., 2023. Evaluation of cutting performance of a TBM disc cutter and Cerchar Abrasivity Index based on the brittleness and properties of rock, Applied Science, 13, 2612. DOI: 10.3390/app13042612
- Johansson, D., Hrechuk, A., Bushlya, V., Mårtensson, M., Can, A., Ståhl, J E. 2019. Small scale testing of PCD and WC-Co tooling in rock cutting using longitudinal turning. Wear, 426–427, B, 1515-1522. DOI: 10.1016/j.wear.2018.11.036.
- Katinas, E., Antonov, M., Jankauskas, V., Goljandin, D., 2023. Effect of local remelting and recycled WC-Co composite reinforcement size on abrasive and erosive wear of manual arc welded hardfacings, Coatings, 13, 734. DOI: 10.3390/coatings13040734
- Katiyar, P. K., Singh, P. K., Singh, R., Iava Kumar, A., 2016. Modes of failure of cemented tungsten carbide tool bits (WC/Co): A study of wear parts, International Journal of Refractory Metals and Hard Materials, 54, 27–38. DOI: 10.1016/j.ijrmhm.2015.06.018
- Kotwica, K., 2018. Atypical and innovative tool, holder and mining head designed for roadheaders used to tunnel and gallery drilling in hard rock, Tunnelling and Underground Space Technology, 82, 493–503. DOI: 10.1016/j.tust.2018.08.017
- Krauze, K., Mucha, K., Wydro, T., 2020. Evaluation of the quality of conical picks and the possibility of predicting the costs of their use, Multidisciplinary Aspects of Production Engineering, 3, 1, 491–504. DOI: 10.2478/mape-2020-0041
- Krauze, K., Bołoz, Ł., Wydro, T., Mucha, K., 2017. Durability testing of tangential-rotary picks made of different materials, MINING – Informatics, Automation and Electrical Engineering, 1, 26–34. DOI: 10.7494/miag.2017.1.529.26
- Krauze, K., Mucha, K., Wydro, T., Pawlik, J., Wróblewska-Pawlik, A., 2023. Mass and volumetric abrasive wear measurements of the mining conical picks, Sustainability, 15, 850. DOI: 10.3390/su15010850
- Krauze, K., Mucha, K., Wydro, T.; Pieczora, E., 2021. Functional and operational requirements to be fulfilled by conical picks regarding their wear rate and investment costs. Energies, 14, 3696. DOI: 10.3390/en14123696
- Mucha, K., 2023. Application of rock abrasiveness and rock abrasivity test methods – A review, Sustainability, 15, 11243. DOI: 10.3390/su 151411243
- Nahak, S., Dewangan, S., Chattopadhyaya, S., Królczyk, G., Hloch, S., 2018. Discussion on importance of tungsten carbide – cobalt (WC-Co) cemented carbide and its critical characterization for wear mechanisms based on mining applications, Archives of Mining Sciences, 63, 1. DOI: 10.24425/118897
- Palaniappan, S.K., Pal, S.K., Chinnasamy, M., Rathanasamy, R., 2022. Efficiency of rock cutting and wear behavior of coated bits via lab-scale linear rock-cutting machine, experimental approach, International Journal of Geomechanics, 23, 06022041. DOI: 10.1061/(ASCE)GM.1943-5622.0002603
- Prostański, D., 2012. Dust control with use of air-water spraying system, Archives of Mining Sciences, 57, 4, 975-990.
- Sandvik’s cutting tools, 2023: https://www.rocktechnology.sandvik/en/products/rock-tools/cutting/cutting-tools (access: 19.06.2023)
- Shi, Z., Zhu, Z., 2017. Case study: wear analysis of the middle plate of a heavy-load scraper conveyor chute under a range of operating conditions, Wear, 380–381, 36-41. DOI: 10.1016/j.wear.2017.03.005
- Su, O., Akkaş, M., 2020. Assessment of pick wear based on the field performance of two transverse type roadheaders: a case study from Amasra coalfield, Bulletin of Engineering Geology and the Environment, 79, 2499–2512. DOI: 10.1007/s10064-019-01712-x
- Sundaramoorthy, R., Tong, S. X., Parekh, D., Subramanian, Ch. 2017. Effect of matrix chemistry and WC types on the performance of Ni-WC based MMC overlays deposited by plasma transferred arc (PTA) welding. Wear, 376–377, B, 1720-1727. DOI: 10.1016/j.wear.2017.01.027.
- Tavani, S., Pignalosa, A., Corradetti, A., Mercuri, M., Smeraglia, L., Riccardi, U., Seers, T., Pavlis, T., Billi, A., 2020. Photogrammetric 3D model via smartphone GNSS sensor: workflow, error estimate, and best practices, Remote Sensing, 12, 3616. DOI: 10.3390/rs12213616
- Tsybulia, I., Przygucki, H., Kasonde, M., Mątewski D. 2020. DEC – diamond enhanced carbides: a new super-hard material with enhanced wear resistance. Min. Inform. Autom. Electr. Eng., 4, 59–64.
- Wang, L., Zhang, D., Wang, D., Feng, C., 2022. A review of selected solutions on the evaluation of coal-rock cutting performances of shearer picks under complex geological conditions. Applied Science, 12, 12371. DOI: 10.3390/app122312371
- Yang, S., Nie, W., Lv, S., Liu, Z., Peng, H., Ma, X., Cai, P., Xu, Ch., 2019. Effects of spraying pressure and installation angle of nozzles on atomization characteristics of external spraying system at a fully-mechanized mining face, Powder Technology, 343, 754-764. DOI: 10.1016/j.powtec.2018.11.042
- Zhang, C., Yuan, Sh., Zhang, N., Li, Ch., Li, H., Yang, W., 2021. Dust-suppression and cooling effects of spray system installed between hydraulic supports in fully mechanized coal-mining face, Building and Environment, 204, 108106. DOI: 10.1016/j.buildenv.2021.108106
Language: English
Page range: 413 - 420
Submitted on: Apr 20, 2023
Accepted on: Oct 15, 2023
Published on: Oct 27, 2023
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2023 Krzysztof Krauze, Kamil Mucha, Tomasz Wydro, Jan Pawlik, Aleksandra Wróblewska-Pawlik, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.