Influence of the drill bit tip geometry on the rotary drilling process performed with a hand-held hydraulic drill
By: Łukasz Bołoz
References
- Beste, U., Jacobson, S., 2008. A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons. Wear 264, 1129–1141. DOI: 10.1016/j.wear.2007.01.030
- Biały, W., 2015. Innovative solutions applied in tools for determining coal mechanical proprerties. Management Systems in Production Engineering 202–209. DOI: 10.12914/MSPE-02-04-2015
- Bołoz, Ł., 2020. Interpretation of the results of mechanical rock properties testing with respect to mining methods. AMS 25, 81–93. DOI: 10.46544/AMS.v25i1.8
- Bołoz, Ł., Midor, K., 2019. The procedure of choosing an optimal offer for a conical pick as an element of realizing the sustainable development concept in mining enterprises. AMS 24, 140–150.
- Feito, N., Díaz-Álvarez, J., Díaz-Álvarez, A., Cantero, J., Miguélez, M., 2014. Experimental Analysis of the Influence of Drill Point Angle and Wear on the Drilling of Woven CFRPs. Materials 7, 4258–4271. DOI: 10.3390/ma7064258
- Gupta, A., Chattopadhyaya, S., Hloch, S., 2013. Critical Investigation of Wear Behaviour of WC Drill Bit Buttons. Rock Mech Rock Eng 46, 169–177. DOI: 10.1007/s00603-012-0255-9
- Hamzaban, M.-T., Rostami, J., Dahl, F., Macias, F.J., Jakobsen, P.D., 2023. Wear of Cutting Tools in Hard Rock Excavation Process: A Critical Review of Rock Abrasiveness Testing Methods. Rock Mech Rock Eng 56, 1843–1882. DOI: 10.1007/s00603-022-03187-x
- Kahraman, S., Fener, M., Kasling, H., Thuro, K., 2018. Investigating the effect of strength on the LCPC abrasivity of igneous rocks. Geomechanics and Engineering 15, 805–810. DOI: 10.12989/GAE.2018.15.2.805
- Kessai, I., Benammar, S., Doghmane, M.Z., Tee, K.F., 2020. Drill Bit Deformations in Rotary Drilling Systems under Large-Amplitude Stick-Slip Vibrations. Applied Sciences 10, 6523. DOI: 10.3390/app10186523
- Krauze, K., Bołoz, Ł., Wydro, T., 2015. Parametric Factors for the Tangential-Rotary Picks Quality Assessment. Archives of Mining Sciences 60, 265–281. DOI: 10.1515/amsc-2015-0018
- Krauze, K., Bołoz, Ł., Wydro, T., Mucha, K., 2019. Investigations into the wear rate of conical picks with abrasion-resistant coatings in laboratory conditions. IOP Conf. Ser.: Mater. Sci. Eng. 679, 012012. DOI: 10.1088/1757-899X/679/1/012012
- Liu, W., Deng, K., Li, R., Li, L., Zhu, X., Gong, S., 2022. The Performance and Failure Mechanism of Drill Bit in Granite Formation Drilling. Arab J Sci Eng. DOI: 10.1007/s13369-022-07578-8
- Midor, K., Wilkowski, G., 2021. Recertification of a Quality Management System based on ISO 9001 - is it a must for a modern manufacturing company? Production Engineering Archives 27, 217–222. DOI: 10.30657/pea.2021.27.29
- Plinninger, R., Spaun, G., Thuro, K., 2002. Predicting tool wear in drill and blast. Tunnels and Tunnelling International 34.
- Riane, R., Kidouche, M., Illoul, R., Doghmane, M.Z., 2022. Unknown Resistive Torque Estimation of a Rotary Drilling System Based on Kalman Filter. IETE Journal of Research 68, 2640–2651. DOI: 10.1080/03772063.2020.1724834
- Saad, A.M., Youness, F., 2023. Towards Improved Management Within the Cottage Industry: Product Lifecycle Management Case. Management Systems in Production Engineering 31, 102–110. DOI: 10.2478/mspe-2023-0013
- Saai, A., Bjørge, R., Dahl, F., Antonov, M., Kane, A., Diop, J.-B., Ojala, N., 2020. Adaptation of Laboratory tests for the assessment of wear resistance of drill-bit inserts for rotary-percussive drilling of hard rocks. Wear 456–457, 203366. DOI: 10.1016/j.wear.2020.203366
- Sakiz, U., Aydin, H., Yarali, O., 2022. Investigation of the rock drilling performance of rotary core drilling. Bulletin of Engineering Geology and The Environment 81. DOI: 10.1007/s10064-021-02534-6
- Shankar, V.K., Kunar, B.M., Murthy, C.S., Ramesh, M.R., 2020. Measurement of bit-rock interface temperature and wear rate of the tungsten car-bide drill bit during rotary drilling. Friction 8, 1073–1082. DOI: 10.1007/s40544-019-0330-2
- Siwiec, D., Pacana, A., 2021. Method of improve the level of product quality. Production Engineering Archives 27, 1–7. DOI: 10.30657/pea.2021.27.1
- Skowron, A., 2015. Tool Lifecycle Management In Industrial Practice. Management Systems in Production Engineering 69–75. DOI: 10.12914/MSPE-04-02-2015
Language: English
Page range: 304 - 310
Submitted on: Apr 27, 2023
Accepted on: Jul 14, 2023
Published on: Aug 28, 2023
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2023 Łukasz Bołoz, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.