References
- Badawi, A.M., Hegazy, M.A., El-Sawy, A.A., Ahmed, H.M., Kamel, W.M., 2010. Novel quaternary ammonium hydroxide cationic surfactants as corrosion inhibitors for carbon steel and as biocides for sulfate reducing bacteria (SRB). Mat. Chem. Phys., 124, 458-465.
- Balaban, Y.A., Kandemir, S.U., 2004. Investigation on some schiff bases as HCl corrosion inhibitors for carbon steel. Mater. Chem. Phys., 85, 420-426.
- Bielski, A., 2021. Mixing effects in the river downstream from pollution discharge point. Technical Transactions 118, art. e2021004, DOI: 10.37705/TechTrans/e2021004
- Chang-bin, T., Dao-xin, L., Zhan, W., Yang, G., 2011. Electro-spark alloying using graphite electrode on titanium alloy surface for biomedical applications. Appl. Surf. Sci., 257, 6364-6371.
- Czyczuła,W, Rochel, M., 2021. Operational problems of tramway infra-structure in sharp curves. Technical Transactions 118, art. e2021015. DOI: 10.37705/TechTrans/e2021015
- Dabek, L., Kapjor, A. Orman, L.J., 2019. Distilled water and ethyl alcohol boiling heat transfer on selected meshed surfaces. Mechanics & Industry, 20, art. 701, DOI: 10.1051/meca/2019068
- Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model. METAL 2017 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1252-1257
- http://www.fanar.pl [on-line access 07.09.2022].
- Konstanty, J., 2005. Powder metallurgy diamond tools. Elsevier, Oxford.
- Kurp P, Danielewski H., 2022. Metal expansion joints manufacturing by a mechanically assisted laser forming hybrid method – concept. Technical Transactions 119, art. e2022008, DOI: 10.37705/TechTrans/e2022008
- Majewski, G., Orman, L.J., Telejko, M., Radek, N., Pietraszek, J., Dudek, A., 2020. Assessment of Thermal Comfort in the Intelligent Buildings in View of Providing High Quality Indoor Environment. Energies, 13, art. 1973, DOI: 10.3390/en13081973
- Maltsevich, I., 2021. Technological structures in construction during the implementation of the National Strategy for Sustainable Development – 2035. Construction of Optimized Energy Potential, 10(2), 61-68, DOI: 10.17512/bozpe.2021.2.08
- Markovic, S., Arsic, D., Nikolic, R.R., Lazic, V., Hadzima, B., Milovanovic, V.P., Dwornicka, R., Ulewicz, R., 2021. Exploitation Characteristics of Teeth Flanks of Gears Regenerated by Three Hard-Facing Procedures. Materials, 14(15), art. 4203, DOI: 10.3390/ma14154203
- Orman, Ł.J., 2014. Boiling heat transfer on single phosphor bronze and copper mesh microstructures. EFM13 – Experimental Fluid Mechanics, 67, art. 2087, DOI: 10.1051/epjconf/20146702087
- Orman, L.J., Radek, N., Pietraszek, J., Szczepaniak, M., 2020. Analysis of Enhanced Pool Boiling Heat Transfer on Laser-Textured Surfaces. Energies, 2020, art. 2700, DOI: 10.3390/en13112700
- Pacana, A., Czerwinska, K., Dwornicka, R., 2019. Analysis of non-compliance for the cast of the industrial robot basis. METAL 2019 28th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 644-650, DOI: 10.37904/metal.2019.869
- Pacana, A., Gazda, A., Malindzak, D., Stefko, R., 2014. Study on improving the quality of stretch film by Shainin method. Przemysł Chemiczny, 93, 243-245.
- Pacana, A., Siwiec, D., Bednarova, L., 2020. Method of Choice: A Fluorescent Penetrant Taking into Account Sustainability Criteria. Sustainability, 12, art. 5854, DOI: 10.3390/su12145854
- Pietraszek, J., 2003. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. Neural Networks and Soft Computing, 19, 250-255, DOI: 10.1007/978-3-7908-1902-1_35
- Pietraszek, J., 2012. Fuzzy Regression Compared to Classical Experimental Design in the Case of Flywheel Assembly. Artificial Intelligence and Soft Computing, 7267, 310-317, DOI: 10.1007/978-3-642-29347-4_36
- Pietraszek, J., Gądek-Moszczak, A., 2013. The Smooth Bootstrap Approach to the Distribution of a Shape in the Ferritic Stainless Steel AISI 434L Powders. Solid State Phenomena, 197, 162-167, DOI: 10.4028/www.scientific.net/SSP.197.162
- Pietraszek, J., Gądek-Moszczak, A., Toruński, T., 2014. Modeling of Errors Counting System for PCB Soldered in the Wave Soldering Technology. Advanced Materials Research, 874, 139-143, DOI: 10.4028/www.scientific.net/AMR.874.139
- Piotrowski, J.Z., Orman, L.J., Lucas, X. Zender-Swiercz, E., Telejko, M., Koruba, D., 2014. Tests of thermal resistance of simulated walls with the reflective insulation. EFM13 - Experimental Fluid Mechanics, 67, art. 2095, DOI: 10.1051/epjconf/20146702095
- Poorqasemi, E., Abootalebi, O., Peikari, M., Haqdar, F., 2009. Investigating accuracy of the Tafel extrapolation method in HCl solutions. Corros. Sci., 51, 1043-1054.
- Radek, N., Bartkowiak, K., 2010. Performance properties of electro-spark deposited carbide-ceramic coatings modified by laser beam. Physics Procedia, 5, 417-423.
- Radek, N., Konstanty, J., Pietraszek, J., Orman, Ł.J., Szczepaniak, M., Przestacki, D., 2021. The effect of laser beam processing on the properties of WC-Co coatings deposited on steel. Materials, 14, 538.
- Radek, N., Sladek, A., Bronček, J., Bilska, I., Szczotok, A., 2014. Electro-spark alloying of carbon steel with WC-Co-Al2O3: deposition technique and coating properties. Advanced Materials Research, 874, 101-106.
- Radek, N., Szczotok, A., Gądek-Moszczak, A., Dwornicka, R., Bronček, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Archives of Metallurgy and Materials, 63, 809-816, DOI:10.24425/122407
- Radzajewski, P., 2021. Calculation of brake-force distribution on three-axle agricultural trailers using simulation methods. Technical Transactions 118, art. e2021029, DOI: 10.37705/TechTrans/e2021029
- Radzyminska-Lenarcik, E., Ulewicz, R., Ulewicz, M., 2018. Zinc recovery from model and waste solutions using polymer inclusion membranes (PIMs) with 1-octyl-4-methylimidazole. Desalination and Water Treatment, 102, 211-219, DOI: 10.5004/dwt.2018.21826
- Regulski, P, Abramek, K., 2022. The application of neural networks for the life-cycle analysis of road and rail rolling stock during the operational phase. Technical Transactions 119, art. e2022002. DOI: 10.37705/TechTrans/e2022002
- Salmaliyan, M., Malek-Ghaeni, F., Ebrahimnia, M., 2017. Effect of electro spark deposition process parameters on WC-Co coating on H13 steel. Surf. Coat. Tech., 321, 81-89.
- Sandenbergh, R.F., Van der Lingen, E., 2005. The use of Tafel back extrapolation to clarify the influence of ruthenium and palladium alloying on the corrosion behaviour of titaniumin concentrated hydrochloric acid. Corros. Sci., 47, 3300-3311.
- Singh, A.K., Quraishi, M.A., 2010. Investigation of adsorption of ionized derivatives at mild steel/hydrochloric acid interface: Electrochemical and weight loss methods. Mater. Chem. Phys., 123, 666-677.
- Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE, 13, art. e0202556, DOI: 10.1371/journal.pone.0202556
- Skrzypczak-Pietraszek, E., Urbanska, A., Zmudzki, P., Pietraszek, J., 2019. Elicitation with methyl jasmonate combined with cultivation in the Plant-form (TM) temporary immersion bioreactor highly increases the accumulation of selected centellosides and phenolics in Centella asiatica (L.) Urban shoot culture. Engineering in Life Sciences, 19, 931-943, DOI: 10.1002/elsc.201900051
- Solmaz, R., 2010. Investigation of the inhibition effect of 5-((E)-4-phenylbuta-1,3-dienylideneamino)-1,3,4 thiadiazole-2-thiol schiff base on mild steel corrosion in hydrochloric acid. Corros. Sci., 52, 3321-3330.
- Styrylska, T., Pietraszek, J,. 1992. Numerical modeling of non-steady-state temperature-fields with supplementary data. Zeitschrift für Angewandte Mathematik und Mechanik, 72, T537-T539
- Ulewicz, R., 2015. Hardening of steel X155CrVMo12-1 surface layer. Journal of the Balkan Tribological Association, 21, 166-172.
- Wójcicka K., 2021. The efficiency of municipal sewage treatment plants inspiration for water recovery. Technical Transactions 118, art. e2021023, DOI: 10.37705/TechTrans/e2021023
Language: English
Page range: 94 - 100
Submitted on: Oct 4, 2022
Accepted on: Dec 20, 2022
Published on: Feb 15, 2023
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2023 Norbert Radek, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.