The use of combined quality management instruments to analyze the causes of non-conformities in the castings of the cover of the rail vehicle bearing housing
By: Karolina Czerwińska
and Adam Piwowarczyk
and Adam Piwowarczyk References
- Bielski, A., 2021. Mixing effects in the river downstream from pollution discharge point. Technical Transactions 118, art. e2021004, DOI: 10.37705/TechTrans/e2021004
- Birol, Y., 2010. Effect of solution heat treatment on the age hardening capacity of dendritic and globular AlSi7Mg0.6 alloys. International Journal of Materials Research 101, 439-444, DOI: 10.3139/146.110293
- Brungs, D., 1997. Light weight design with light metal castings. Materials and Design 18, 285-291, DOI: 10.1016/s0261-3069(97)00065-4
- Cavaliere, P., Cerri, E., Leo, P., 2004. Effect of heat treatments on mechanical properties and fracture behavior of a thixocast A356 aluminum alloy. Journal of Materials Science, 39, 1653-1658, DOI: 10.1023/B:JMSC. 0000016165.99666.dd
- Czyczuła, W., Rochel, M., 2021. Operational problems of tramway infrastructure in sharp curves. Technical Transactions, 118, e2021015, DOI: 10.37705/TechTrans/e2021015
- Danielewski, H., Skrzypczyk, A., Zowczak, W., Gontarski, D., Płonecki, L., Wiśniewski, H., Soboń, D., Kalinowski, A., Bracha, G., Borkowski, K., 2021. Numerical analysis of laser-welded flange pipe joints in lap and fillet configurations. Technical Transactions, 118, e2021030, DOI: 10.37705/TechTrans/e2021030
- Falęcki, Z., 1997. Analiza wad odlewów. AGH, Kraków.
- Hurtalová, L., Tillová, E., Chalupová, M., 2013. The structure analysis of secondary (Recycled) AlSi9Cu3 cast alloy with and without heat treatment. Engineering Transactions 61, 197-218.
- Hurtalová, L., Belan, J., Tillová, E. Chalupová, M. 2011. Changes in Structural Characteristics of Hypoeutectic Al-Si Cast Alloy after Age Hardening. Materials Science, 18, 228-233, DOI: 10.5755/j01.ms.18.3.2430
- Julis, M., Pospisilova, S., Zapletal, J., Podrabsky, T., 2011. Study of micro-structure and mechanical properties of aluminum alloy AlSi7Mg0.6 after different cooling methods. Chemicke Listy, 105, 812-813.
- Kalinowski, A., Radek, N., Broncek, J., 2021. Safety of operation and maintenance activities of rolling stocks by the example of electric multiple units EN96. Communications - Scientific Letters of the University of Žilina, 23, F11-F19, DOI: 10.26552/COM.C.2021.1.F11-F19
- Korzekwa, J., Gądek-Moszczak, A., Zubko, M., 2018. Influence of the Size of Nanoparticles on the Microstructure of Oxide Coatings. Materials Science, 53, 709-716, DOI: 10.1007/s11003-018-0127-x
- Kozakowski, S., 2001. Badanie odlewów - technologie odlewnicze, typowe dla nich wady i metody ich ujawniania. Biuro Gamma, Warszawa.
- Kubecki, A., Śliwiński, C., Śliwiński, J., Lubach, I., Bogdan, L., Maliszewski, W., 2021. Assessment of the technical condition of mines with mechanical fuses. Technical Transactions 118, e2021025, DOI: 10.37705/Tech-Trans/e2021025
- Kurp, P., Danielewski, H., 2022. Metal expansion joints manufacturing by a mechanically assisted laser forming hybrid method – concept. Technical Transactions, 119, e2022008, DOI: 10.37705/TechTrans/e2022008
- Lipiński, T., 2017. Roughness of 1.0721 steel after corrosion tests in 20% NaCl. Production Engineering Archives, 15, 27-30, DOI: 10.30657/pea. 2017.15.07
- Lipiński, T., Wach, A., 2014. Influence of outside furnace treatment on purity medium carbon steel. 23rd International Conference on Metallurgy and Materials, Ostrava, Tanger, 738-743.
- Łuszczak, M., Dańko, R., 2013. Stan zagadnienia w zakresie odlewania du-żych odlewów strukturalnych ze stopów aluminium. Archives of Foundry Engineering, 13, 113-116.
- Łybacki, W., Zawadzka, K., 2008. Wspomaganie diagnostyki wad odlewniczych narzędziami zarzadzania jakością. Archiwum Technologii Maszyn i Automatyzacji, 28, 89-101.
- Marković, S., Arsić, D., Nikolić, R., Lazić, V., Hadzima, B., Milovanović, V., Dwornicka, R., Ulewicz, R., 2021. Exploitation characteristics of teeth flanks of gears regenerated by three hard-facing procedures. Materials 14, 4203, DOI: 10.3390/ma14154203834814534361396
- Morawski, M., Talarczyk, T., Malec, M., 2021. Depth control for biomimetic and hybrid unmanned underwater vehicles. Technical Transactions 118, e2021024, DOI: 10.37705/TechTrans/e2021024
- Mueller, M.G., Fornabaio, M., Zagar, G., Mortensen, A., 2016. Microscopic strength of silicon particles in an aluminium-silicon alloy. Acta Materialia, 105, 165-175, DOI: 10.1016/j.actamat.2015.12.006
- Naik, A., 2021. HMM-based phoneme speech recognition system for the control and command of industrial robots. Technical Transactions, 118, e2021002, DOI: 10.37705/TechTrans/e2021002
- Ostasz, G., Czerwińska, K., Pacana, A., 2020. Quality management of aluminum pistons with the use of quality control points. Management Systems In Production Engineering, 28, 29-33, DOI: 10.2478/mspe-2020-0005
- Pacana, A., Bednarova, L., Pacana, J., Liberko, I., Wozny, A., Malindzak, D., 2014. Effect of selected factors of the production process of stretch film for its resistance to puncture. Przemysl Chemiczny, 93, 2263-2264.
- Pacana, A., Czerwińska, K., Bednarova, L., 2018. Discrepancies analysis of casts of diesel engine piston. Metalurgija, 57, 324-326.
- Pacana, A., Czerwińska, K., Bednarova, L., 2019. Comprehensive improvement of the surface quality of the diesel engine piston. Metalurgija, 58, 329-332.
- Pacana, A., Pasternak-Malicka, M., Zawada, M., 2016. Decision support in the production of packaging films by cost-quality analysis. Przemysł Chemiczny, 95, 1042-1044, DOI: 10.15199/62.2016.5.31
- Pacana, A., Siwiec, D., Bednárová, L., 2019. Analysis of the incompatibility of the product with fluorescent method. Metalurgija, 58, 337-340.
- Pezda, J., 2017. Zastosowanie metody ATND do oceny właściwości mechanicznych okołoeutektycznego stopu AlSi12Cu2(Fe). Inżynieria Maszyn, 22, 47-57.
- Pliszka, I., Radek, N., 2017. Corrosion Resistance of WC-Cu Coatings Produced by Electrospark Deposition. Procedia Engineering, 192, 707-712, DOI: 10.1016/j.proeng.2017.06.122
- PN-EN 1706:2011 (2011). Aluminum and aluminum alloys castings. Chemical composition and mechanical properties, PKN, Warszawa.
- Pietraszek, J., Dwornicka, R., Szczotok, A., 2016. The bootstrap approach to the statistical significance of parameters in the fixed effects model. ECCOMAS 2016 – Proc. 7th European Congress on Computational Methods in Applied Sciences and Engineering, 3, 6061-6068, DOI: 10.7712/100016.2240.9206
- Pietraszek, J., Gądek-Moszczak, A., Radek, N., 2014. The estimation of accuracy for the neural network approximation in the case of sintered metal properties. Studies in Computational Intelligence, 513, 125-134, DOI: 10.1007/978-3-319-01787-7_12
- Poloczek, Ł., Kiełbus, A., 2016. Wpływ czynników technologicznych na jakość odlewów ze stopów aluminium. Zarządzanie Przedsiębiorstwem, 19, 14-19.
- Pysz, S., Maj, M., Czekaj, E., 2014. High-Strength Aluminium Alloys and Their Use in Foundry Industry of Nickel Superalloys. Archives of Foundry Engineering, 14, 71-76.10.2478/afe-2014-0065
- Radek, N., 2009. Determining the operational properties of steel beaters after electrospark deposition. Eksploatacja i Niezawodność, 44, 10-16.
- Radek, N., Dwornicka, R., 2020. Fire properties of intumescent coating systems for the rolling stock. Communications - Scientific Letters of the University of Žilina, 22, 90-96, DOI: 10.26552/com.C.2020.4.90-96
- Radzajewski, P., 2021. Calculation of brake-force distribution on three-axle agricultural trailers using simulation methods. Technical Transactions 118, e2021029, DOI: 10.37705/TechTrans/e2021029
- Radzymińska-Lenarcik, E., Ulewicz, R., Ulewicz, M., 2018. Zinc recovery from model and waste solutions using polymer inclusion membranes (PIMs) with 1-octyl-4-methylimidazole. Desalination and Water Treatment, 102, 211-219, DOI: 10.5004/dwt.2018.21826
- Regulski, P., Abramek, K., 2022. The application of neural networks for the life-cycle analysis of road and rail rolling stock during the operational phase. Technical Transactions, 119,. e2022002, DOI: 10.37705/Tech-Trans/e2022002
- Salomon, A., Voigt, C., Fabrichnaya, O., Aneziris, C.G., Rafaja, D., 2017. Formation of Corundum, Magnesium Titanate, and Titanium(III) Oxide at the Interface between Rutile and Molten Al or AlSi7Mg0.6 Alloy. Advanced Engineering Materials, 19, 1700106, DOI: 10.1002/adem. 201700106
- Sawicki, T., 2021. Improved rack and pinion drive. Technical Transactions 118, e2021013, DOI: 10.37705/TechTrans/e2021013
- Siwiec, D., Bednarova, L., Pacana., A., Zawada, M., Rusko, M. 2019. Decision support in the selection of fluorescent penetrants for industrial nondestructive testing. Przemysł Chemiczny, 98, 1594-1596, DOI: 10.15199/62.2019.10.12
- Słowiński, K., Piekarczyk, M., Król, M., 2021. Verification of the cylindrical tank shell stability using the stress design and the MNA-LBA procedure. Technical Transactions, 118, e2021021, DOI: 10.37705/Tech-Trans/e2021021
- Szczotok, A., Pietraszek, J., Radek, N., 2017. Metallographic Study and Repeatability Analysis of γ’ Phase Precipitates in Cored, Thin-Walled Castings Made from IN713C Superalloy. Archives of Metallurgy and Materials, 62, 595-601, DOI: 10.1515/amm-2017-0088
- Szczotok, A., Roskosz, S., 2005. New possibilities of light microscopy research resulting from digital recording of images. Materials Science-Poland, 23, 559-565.
- Thoni Alutec Sp. z o.o., 2021. Unpublished materials. Stalowa Wola.
- Traneva, V., Atanassova, V., Tranev, S., 2019a. Index matrices as a decision-making tool for job appointment. Lecture Notes in Computer Science 11189, 158-166, DOI: 10.1007/978-3-030-10692-8_18
- Traneva, V., Tranev, S., Szmidt, E., Atanssov, K., 2018. Three dimensional intercriteria analysis over intuitionistic fuzzy data. Advances in Intelligent Systems and Computing, 643, 442-449, DOI: 10.1007/978-3-319-66827-7_40
- Traneva, V., Tranev, S., 2019b. An interval-valued intuitionistic fuzzy approach to the assignment problem. Advances in Intelligent Systems and Computing, 1029, 1279-1287, DOI: 10.1007/978-3-030-23756-1_150
- Tybulczuk, J., Seredyński, J.,Szanda, M., 2006. Zarządzanie jakością w procesie produkcyjnym odlewów ze stopów Al-Si o specyficznych wymaganiach mechanicznych w „INNOWACJA” Sp. z o.o. w Nowej Dębie. Archiwum Odlewnictwa, 6, 18(1), 53-58.
- Ulewicz, M., Lesińska, U., Bocheńska, M., 2010. Transport of lead across polymer inclusion membrane with p-tert -butylcalix[4]arene derivative. Physicochemical Problems of Mineral Processing, 44, 245-256.
- Wójcicka, K., 2021. The efficiency of municipal sewage treatment plants inspiration for water recovery. Technical Transactions, 118, e2021023, DOI: 10.37705/TechTrans/e2021023
- Wysoczański, A., Kamyk, Z., Yvinec, Y., 2021. Analysis of the possibility of employing 3D printing technology in crisis situations. Technical Transactionsm 118, e2021008, DOI: 10.37705/TechTrans/e2021008
- Yang, Q., Xia, C., Deng, Y., Li, X., Wang, H., 2019. Microstructure and Mechanical Properties of AlSi7Mg0.6 Aluminum Alloy Fabricated by Wire and Arc Additive Manufacturing Based on Cold Metal Transfer (WAAM-CMT). Materials 12, 2525, DOI: 10.3390/ma12162525671923231398869
Language: English
Page range: 289 - 294
Submitted on: May 11, 2022
Accepted on: Jul 20, 2022
Published on: Aug 5, 2022
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2022 Karolina Czerwińska, Adam Piwowarczyk, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.