Influence of Shot Peening on the Wear Behaviour of Medium Carbon Steel
References
- Abens, M., Muruganatham, R., Asulvel, S., 2019. Friction-wear behavior of shot peened aluminium 7075 – T651 alloy. Indian Journal of Engineering and Materials Science, 26(2), 20-26.
- Bagherifard, S., Beni, N. R., Kajanek, D., Donnini, R., Monti, S., Molla, F. M., Hadzima, B., Guagliano, M., 2021. Inclined and multi-directional surface impacts accelerate biodegradation and improve mechanical properties of pure iron. Journal of the Mechanical Behavior of Biomedical Materials, 119, 104476.
- Bagherifard, S., Molla, F. M., Kajanek, D., Donnini, R., Hadzima, B., Guagliano, M., 2019. Accelarated biodegradation and improved mechanical performance of pure iron through surface grain refinement. Acta Biomaterialia, 98, 88-102.
- Baiker, S., et al., 2012. Shot Peening – A Dynamic Application and Its Future. MFN Wetziken.
- Bhavar, V., Patie, S., Kattire, P., Date, P., Singh, R., 2017. Influence of shot peening on DIN 1.2714 hot work tool steel. Journal of Material Science and Chemical Engineering, 5, 81-90.
- Bílik, J., Baca, J., 2004. Mechanical Strenghtening of Surface Layers by Dynamic Shot Peening. In. Conference Metal 2004, Hradec nad Moravicí.
- Bokůvka, O., Nicoletto, G., Guagliano, M., Kunz, L., Palček, P., Nový, F., Chalupová, M., 2014. Fatigue of Materials at Low and High Frequency Loading. EDIS – UNIZA, Žilina.
- Gangopadlhyay, A., Mc Watt, D., 2008. The effect of novel surface textures on tappet Shims on Valvetrian friction and Wear. Tribology Transaction, 51, 221-230.
- Holzmann, M., Klesnil, M., 1972. Brittle and fatigue fracture of materials and construction. SNTL Praha, (in Czech).
- Höppel, H.W., Prell, M., May, L., Göken, M., 2010. Influence of grain size and precipitates on the fatigue lives and deformation mechanisms in the UHCF regime, Proc. Eng., 1025-1034.
- Jech. J., 1983. Heat Treatment of Steels. SNTL, Praha, (in Czech).
- Lago, J., Trško, L., Jambor, M., Nový, F., Bokůvka, O., Mičian, M., Pastorek, F., 2019. Fatigue life improvement of the high strength steel welded joints by ultrasonic impact peening. Metals, 9, 619.
- Miková, K., Bagherifard, S., Bokůvka, O., Guagliano, M., Trško, L., 2013. Fatigue behavior of X70 microalloyed steel after severe shot peening. Int. J. Fatigue, 55, 33-42.
- Mitrovic, S., Adamovic, D., Zivic, F., Dzunic, D., Pastic, M., 2014. Friction and wear behavior of shot peened surface of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact. Applied Surface Science 290, 223-232.
- Moravčík, R., Hazlinger, M., Palcut, M., Trško, L., Pastorek, F., 2021. Surface Engineering. Aleš Čeněk, s. r. o., Plzeň, 195-247.
- Moravčík, R., Hazlinger, M., 2017. Degradation Processes and Life-time Prediction. Aleš Čeněk, s. r. o., Plzeň, 64-66.
- Nový, F., Chalupová, M., Činčala, M., Bokůvka, O., 2008. Influence of surface quality on the fatigue crack initiation. Acta Mechanica Slovaca, 12(4), 209-2014.
- Palacios, M., Bagherifard, S., Guagliano, M., Fernández Pariente, I., 2014. Influence of severe shot peening on wear behavior of an aluminium alloy. Fatigue and Fracture of Engineering Materials and Structures, 37(7), 821-829.
- Skočovský, P., Palček, P., Konečná, R., Várkoly, L., 2000. Construction Materials. EDIS – UNIZA, Žilina, (in Slovak).
- Skočovský, P., Bokůvka, O., Konečná, R., Tillová, E., 2015. Materials Science. EDIS – UNIZA, Žilina, (in Slovak).
- Steels, Production Program II. Part, Volume 2, Standard ČSN 41 4160 (GOST:50chG, 50 chGA), GŘHŽ, Praha, 1980 (in Czech).
- Trško, L., Bokůvka, O., Nový, F., Guagliano, M., 2014. Effect of severe shot peening on ulta-high-cycle fatigue of a low-alloy steel. Mater. Des., 57, 103-113.
- Trško, L., Guagliano, M., Lukáč, P., Bokůvka, O., Nový, F., 2015. Effects of severe shot peening on the surface state of AW 7075 Al alloy. Kov. Mater. Met. Mater, 53, 239-243.
- Ulewicz, R., Mazur, M., Bokůvka, O., 2013. Structure and mechanical properties of fine-grained steels. Periodica Polytechnica Transportation Engineering, 41(2), 111-115.
- Vaško, A., Belan, J., Kuchariková, L., 2017. Comparison of low and high frequency fatigue tests. Production Engineering Archives. 17(17), 14-17.
- Wu, J., Liu, H., Wei, P., Lin, Q., Zhou, S., 2020. Effect of shot peening coverage on residual stress and surface roughness of 18CrNiMo7-6 steel. International Journal of Mechanical Sciences, 183, 105785.
- Yan, Z., Zhu, P., Chen, Z., Zhang, H., Zhang, Y., Zhang, Yu., 2022. Effect of shot peening on the surface properties and wear behavior of heavy-duty-axle gear steels. Journal of Materials Research and Technology, 17, 22-32.
- Zammit, A., Abela, S., Wagner, L., Mhaede, M., Grech, M., 2013. Tribological behavior of shot peened Cu-Ni austempered ductile iron. Wear, 302, 829-836.
Language: English
Page range: 241 - 245
Submitted on: Apr 28, 2022
Accepted on: Jun 8, 2022
Published on: Aug 5, 2022
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2022 Martin Vicen, Otakar Bokůvka, Libor Trško, Mário Drbul, Ružica Nikolić, František Nový, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.