Experimental studies of the possibility of laser processing as a cleaner method of achieving a surface with good adhesion
References
- Berkel, R., Willems, E., Lafleur, M., 1997. The Relationship between Cleaner Production and Industrial Ecology. Journal of Industrial Ecology, 1, 51-6610.1162/jiec.1997.1.1.51
- Capello, E., Chiarello, P., Previtali, B., Vedani, M., 2003. Laser welding and surface treatment of a 22Cr-5Ni-3Mo duplex stainless steel. Materials Science and Engineering A351, 334-34310.1016/S0921-5093(02)00841-9
- Chichilnisky, G., 1997. What is Sustainable Development? Land Economics 73(4), 467-9110.2307/3147240
- Ciecińska, B., 2021. Using Lasers as Safe Alternatives for Adhesive Bonding. Emerging Research and Opportunities. IGI Global, Hershey-USA10.4018/978-1-7998-4634-5
- Çoban, O., Akman, E., Bora, M. Ö., Oztoprak, B. G., Demir, A., 2019. Laser Surface Treatment of CFRP Composites for a Better Adhesive Bonding Owing to the Mechanical Interlocking Mechanism. Polymer Composites, 40, 3611-3622, DOI: 10.1002/pc.25224
- Genna, S., Leone, C., Ucciardello, N., Guliani, M., 2017. Increasing Adhesive Bonding of Caron Reinforces Thermoplastic Matrix by Laser Surface Treatment. Polymer engineering and Science 2, 685-692, DOI: 10.1002/pen.24577
- Hens, L., Block, C., Cabello-Eras, J.J., Sagastume-Gutierez, A., Garcia-Lorenzo, D., Chamorro, C., Herrera Mendoza, K., Haeseldonckx, D., Vandecasteele, C., 2018. On evolution of “Cleaner Production: as a concept and a practice. Journal of Cleaner Production 172, 3323-3333, DOI: 10.1016/j.jclepro.2017.11.082
- Jabareen, Y., 2008. A new conceptual framework for sustainable development. Environ Dev Sustain 10, 179-192, DOI 10.1007/s10668-006-9058-z
- Jakóbczak, Ż., 2022. ISO 4624 – Próba siły przyczepności powłok do podłoża. https://portalkorozyjny.pl/iso-4624-proba-odrywania-dooceny-przyczepnosci/ (available on-line 28.04.2022)
- Landete-Ruiz, M. D., Martín-Martínez, J. M., 2015. Improvement of adhesion and paint ability of EVA copolymers with different vinyl acetate contents by treatment with UV-ozone. International Journal of Adhesion & Adhesives 58, 34-43, DOI: 10.1016/j.ijadhadh.2015.01.003
- Langer, M., Rechner, R., Thieme, M., Jansen, I., Beyer, E., 2012. Surface analytical characterization of Nd:YAG-laser pre-treated Al Mg3 as a preparation for bonding. Solid State Science 14, 926-935, DOI:10.1016/j.solidstatesciences.2012.04.029
- Mandolfino, C., Lertora, E., Genna, S., Leone, C., Gambaro, C., 2015. Effect of laser and plasma surface cleaning on mechanical properties of adhesive bonded joints. Procedia CIRP 33, 458-463, DOI: 10.1016/j.procir.2015.06.054
- Montealegre, M. A., Castro, G., Rey, P., Arias, J. L., Vázquez, P., González, M., 2010. Surface treatments by laser technology. Contemporary Materials I-1, 19-30, DOI: 10.5767/anurs.cmat.100101.en.019M
- Muna, K. A., 2018. Laser Surface Treatment and Modification of Aluminum Alloy Matrix Composites. Lasers in Manufacturing and Materials Processing 5, 81-94, DOI: 10.1007/s40516-018-0054-6
- Nowosielski, R., Babilas, R., Pilarczyk, W., 2007. Sustainable technology as a basis of cleaner production. Journal of Achievements in Materials and Manufacturing Engineering, 20/1-2, 527-530
- Parris, T. M., Kates, R. W., 2003. Characterizing and measuring sustainable development. Annu. Rev. Environ. Resour. 28, 559-86, DOI: 10.1146/annurev.energy.28.050302.105551
- Radek, N., Tokar, D., Kalinowski, A., Pietraszek, J., 2021, Influence of laser texturing on tribological properties of DLC coatings. Production Engineering Archives, 27(2), 119-123, DOI: 10.30657/pea.2021.27.15
- Rotel, M., Zahavi, J., Tamir, S., Buchman, A., Dodiuk, H., 2000. Pre-bonding technology based on excimer laser Surface treatment. Applied Surface Science, 154-155, 610-61610.1016/S0169-4332(99)00384-0
- Ulewicz, R., Nový, F., 2018. Influence of laser treatment on properties of high speed tool. Technical Transactions 10, 195-200, DOI: 10.4467/2353737XCT.18.157.9307
- Zhu, C., Wan, H., Min, J., Lin, J., Carlson, B. E., Maddela, S., 2019. Application of pulsed Yb: Fiber laser to surface treatment of Al alloys for improves adhesive bonded performance. Optics and Lasers in Engineering 119, 65-76, DOI: 10.1016/j.optlaseng.2019.03.017
- PN-EN 10088-1:2004-12 Stainless steels – Part 1: List of stainless steels
- PN-EN 573-3:2019-12 Aluminum and aluminum alloys – Chemical composition and types of wrought products – Part 3: Chemical composition and types of articles
- PN-EN ISO 4287:1999 Geometrical product specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters
- PN-EN ISO 4624:2004 Paints and varnishes – Pull-off test for adhesion
Language: English
Page range: 233 - 240
Submitted on: Feb 7, 2022
Accepted on: Jun 9, 2022
Published on: Aug 5, 2022
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2022 Barbara Ciecińska, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.