Quality of automotive sand casting with different wall thickness from progressive secondary alloy
References
- Bacaicoa, I., Luetje, M., Zeismann, F., Geisert, A., Fehlbier, M., Brueckner-Foit, A., 2019. On the role of Fe-content on the damage behavior of an Al-Si-Cu alloy. Procedia Structural Integrity, 23, 33-38, DOI: 10.1016/j.prostr.2020.01.05910.1016/j.prostr.2020.01.059
- Cais, J., 2015. Electron microscopy. Metalografie, Centrum pro studium vysokého školství, Praha. (in Czech)
- Castro-Sastre, M.Á., García-Cabezón, C., Fernández-Abia, A.I., Martín-Pedrosa, F., Barreiro, J., 2021. Comparative Study on Microstructure and Corrosion Resistance of Al-Si Alloy Cast from Sand Mold and Binder Jetting Mold. Metals, 11(9), 1421, DOI: 10.3390/met1109142110.3390/met11091421
- Davor, S., Špada, V., Iljkić, D., 2019. Influence of natural aging on the mechanical properties of high pressure die casting (HPDC) EN AC 46000-AlSi9Cu3(Fe) Al alloy. Materials Testing 61(5), 448-454, DOI: 10.3139/120.11134110.3139/120.111341
- Fiocchi, J., Biffi, C.A., Tuissi, A., 2020. Selective laser melting of high-strength primary AlSi9Cu3 alloy: Processability, microstructure, and mechanical properties. Materials & Design, 191, 108581, DOI: 10.1016/j.matdes.2020.10858110.1016/j.matdes.2020.108581
- Ji, S., Yang, W., Gao, F., Watson, D., Fan, Z., 2013. Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloys. Materials Science and Engineering: A, 564, 130-139, DOI: 10.1016/j.msea.2012.11.09510.1016/j.msea.2012.11.095
- Kasala, J., Pernis, R., Pernis, I., Ličková, M., 2011. Influence of iron and mangan quality on porn level in the Al-si-Cu, Chem. Letters, 105, 627-629. (in Slovak)
- Kasińska, J., Bolibruchová, D., Matejka, M., 2020. The Influence of Remelting on the Properties of AlSi9Cu3 Alloy with Higher Iron Content. Materials (Basel), 13(3), 575, DOI: 10.3390/ma1303057510.3390/ma13030575704071131991831
- Kaufman, J., Rooy, E., 2004. Aluminum alloy castings: properties, processes, and applications, ASM International, USA.10.31399/asm.tb.aacppa.9781627083355
- Kuchariková, L., Liptáková, T., Tillová, E., Kajánek, D., Schmidová, E., 2018. Role of Chemical Composition in Corrosion of Aluminum Alloys. Metals, 8(8), 581, DOI: 10.3390/met808058110.3390/met8080581
- Kuchariková, L., Tillová, E., Pastirčák, R., Uhríčik, M., Medvecká, D., 2019. Effect of Wall Thickness on the Quality of Casts from Secondary Aluminium Alloy. Manufacturing Technology, 19(5), 797-801, DOI: 10.21062/ujep/374.2019/a/1213-2489/MT/19/5/797.10.21062/ujep/374.2019/a/1213-2489/MT/19/5/797
- Li, F., Zhang, J., Bian, F., Fu, Y., Xue, Y., Yin, F., Xie, Y., Xu, Y., Sun, B., 2015. Mechanism of Filling and Feeding of Thin-Walled Structures during Gravity Casting. Materials, 8(6), 3701-3713. DOI: 10.3390/ma8063701.10.3390/ma8063701
- Mahta, M., Emamy, M., Cao, M., Xinjin, J., Campbell, John., 2008. Overview of Β-Al5FeSi phase in Al-Si alloys. Materials Science Research Trends, 251-272.
- Mae, H., Teng, X., Bai, Y., Wierzbicki, T., 2008. Comparison of ductile fracture properties of aluminum castings: Sand mold vs. metal mold. International Journal of Solids and Structures, 45(5), 1430-1444, DOI: 10.1016/j.ijsolstr.2007.10.016.10.1016/j.ijsolstr.2007.10.016
- Qi, M., Li, J., Kang, Y., 2019. Correlation between segregation behavior and wall thickness in a rheological high pressure die-casting AC46000 aluminum alloy. Journal of Materials Research and Technology, 8(4), 3565-3579, DOI: 10.1016/j.jmrt.2019.03.016.10.1016/j.jmrt.2019.03.016
- Reyes, A.E.S., Guerrero, G.A., Ortiz, G.R., Gasga, J.R., Robledo, J.F.G., Flores, O.L., Costa, P.S., 2020. Microstructural, microscratch and nanohardness mechanical characterization of secondary commercial HPDC AlSi9Cu3-type alloy. Journal of Materials Research and Technology, 9, 4, 8266-8282, DOI: 10.1016/j.jmrt.2020.05.098.10.1016/j.jmrt.2020.05.098
- Roučka, J., 2004. Metalurgy of non-ferrous alloys, Cerm, Brno.(in Czech)
- Tillová, E., Chalupová, M., 2009. Structural analysis of Al-Si, EDIS, Žilina. (in Slovak)
Language: English
Page range: 172 - 177
Submitted on: Feb 17, 2022
Accepted on: Mar 28, 2022
Published on: May 19, 2022
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2022 Lucia Pastierovičová, Lenka Kuchariková, Eva Tillová, Mária Chalupová, Richard Pastirčák, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.