Modeling and optimization of friction stir stitching of AISI 201 stainless steel via Box-Behnken design methodology
References
- Aliakbari, S., Ketabchi, M., Mirsalehi, S.E., 2018. Through-thickness friction stir processing; a low-cost technique for fusion welds repair and modification in AA6061 alloy. Journal of Manufacturing Processes, 35, 226-232.10.1016/j.jmapro.2018.08.006
- Azizi, D., Shafaei, S. Z., Noaparast, M., Abdollahi, H., 2012. Modeling and optimization of low-grade Mn bearing ore leaching using response surface methodology and central composite rotatable design. Trans. Nonferrous Met. Soc. China, 22, 2295-2305.10.1016/S1003-6326(11)61463-5
- Derazkola, H.A., Khodabakhshi, F., Gerlich, A.P., 2020. Fabrication of a nanostructured high strength steel tube by friction-forging tubular additive manufacturing (FFTAM) technology. Journal of Manufacturing Processes, 58, 724-735.10.1016/j.jmapro.2020.08.070
- Filho, I.R.S., Junior, D.R.A., Gauss, C., Sandim, M.J.R., Suzuki, P.A., Sandim, H.R.Z., 2019. Austenite reversion in AISI 201 austenitic stainless steel evaluated via in situ synchrotron X-ray diffraction during slow continuous annealing. Materials Science and Engineering A, 755, 267-77.10.1016/j.msea.2019.04.014
- Filho, I.R.S., Sandim, M.J.R., Cohen, R., Nagamine, L.C.C.M., Hoffmann, J., Bolmaro, R.E., Sandim, H.R.Z., 2016. Effects of strain-induced marten-site and its reversion on the magnetic properties of AISI 201 austenitic stainless steel. Journal of Magnetism and Magnetic Materials, 419, 156-165.10.1016/j.jmmm.2016.06.027
- Filho, I.R.S., Zilnyk, K.D., Sandim, M.J.R., Bolmaro, R.E., Sandim, H.R.Z., 2017. Strain partitioning and texture evolution during cold rolling of AISI 201 austenitic stainless steel. Materials Science and Engineering: A, 702, 161-172.10.1016/j.msea.2017.07.010
- Ghelich, R., Jahannama, M. R., Abdizadeh, H., Torknik, F. S., Vaezi, M. R, 2019. Central composite design (CCD)-Response surface methodology (RSM) of effective electrospinning parameters on PVP-B-Hf hybrid nanofibrous composites for synthesis of HfB2-based composite nanofibers, Composites Part B, 166, 527-541.10.1016/j.compositesb.2019.01.094
- Heydari, F., Amadeh, A.A., Ojo, O.O., Hasanniya, M.H., Tamizifar, M., 2019. Microstructure and mechanical properties of autobody steel joined by friction stir spot welding. Sādhanā, 44, 1-1010.1007/s12046-019-1057-5
- Li, B., Shen, Y., 2011. The investigation of abnormal particle-coarsening phenomena in friction stir repair weld of 2219-T6 aluminum alloy. Materials and Design, 32, 3796-3802.10.1016/j.matdes.2011.03.029
- Ojo, O.O., 2019. Multi-Objective Optimization of Friction Stir Spot Welds of Aluminum Alloy Using Entropy Measurement. International Journal of Engineering Research in Africa, 45, 28-41.10.4028/www.scientific.net/JERA.45.28
- Perry, M.E.J., Griffiths, R.J., Garcia, D., Sietins, J.M., Zhu, Y., Yu, H.Z., 2020. Morphological and microstructural investigation of the non-planar interface formed in solid-state metal additive manufacturing by additive friction stir deposition. Additive Manufacturing, 35, 101293.10.1016/j.addma.2020.101293
- Reimann, M., Goebel, J., dos Santos, J.F., 2017. Microstructure and mechanical properties of keyhole repair welds in AA 7075-T651 using refill friction stir spot welding. Materials and Design, 132, 283-294.10.1016/j.matdes.2017.07.013
- Rouzbehani, R., Kokabi, A.H., Sabet, H., Paidar, M., Ojo, O.O., 2018. Metallurgical and mechanical properties of underwater friction stir welds of Al7075 aluminum alloy. Journal of Materials Processing Technology, 262, 239-256.10.1016/j.jmatprotec.2018.06.033
- Soleymani, A.R., Saien, J., Chin, S., Le, H.A., Park, E., Jurng, J., 2015. Modeling and optimization of a sono-assisted photocatalytic water treatment process via central composite design methodology. Process Safety and Environmental Protection, 94, 307-314.10.1016/j.psep.2014.07.004
- Teng, J., Wang, D., Wang, Z., Zhang, X., Li, Y., Cao, J., Xu, W., Yang, F., 2017. Repair of arc welded DH36 joint by underwater friction stitch welding. Materials and Design, 118, 166-278.10.1016/j.matdes.2017.01.016
- Tunç, I.D., Erol, M., Güneş, F., Sütçü, M., 2020. Growth of ZnO nanowires on carbon fibers for photocatalytic degradation of methylene blue aqueous solutions: An investigation on the optimization of processing parameters through response surface methodology/central composite design. Ceramics International, 46, 7459-7474.10.1016/j.ceramint.2019.11.244
- Vahdati, M., Moradi, M., 2020. Statistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach. Iranian Journal of Materials Forming, 7, 32-45.
- Wang, Z., Teng, J., Wang, D., Cui, L., Liu, H., Yang, J., Zhang, Y., Zhu, H., 2019. Observations of repair process by friction stitch welding in simulated wet conditions-Flaws, microstructure and hardness evolutions in overlapping welds. Journal of Materials Processing Technology, 264, 220-233.10.1016/j.jmatprotec.2018.09.013
- Zhang, G., Xiao, C., Ojo, O.O., 2021. Dissimilar friction stir spot welding of AA2024-T3/AA7075-T6 aluminum alloys under different welding parameters and media. Defence Technology, 17, 531-544.10.1016/j.dt.2020.03.008
- Zhang, X., Deng, C., Wang, D., Wang, Z., Teng, J., Cao, J., Xu, W., Yang, F., 2016. Improving bonding quality of underwater friction stitch welds by selecting appropriate plug material and welding parameters and optimizing joint design. Materials and Design, 91, 398-410.10.1016/j.matdes.2015.11.114
Language: English
Page range: 132 - 140
Submitted on: Jun 22, 2021
Accepted on: Dec 20, 2021
Published on: May 19, 2022
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2022 Olatunji Oladimeji Ojo, Isaac Ojo Obasha, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.