Multi-Independent Optimization while Turning of Inconel-600 alloy using Grey Interactive Exploration
By: Sachin Sonawane
, Sandeep Wangikar and Kuldip Pukale
, Sandeep Wangikar and Kuldip Pukale References
- Abidi, Y., 2020. Relationship between surface roughness and chip morphology when turning hardened steel. Production Engineering Archives, 26(3), 92–98.10.30657/pea.2020.26.19
- Abidi, Y., 2021. Analysis of the compromose between cutting tool life, productivity and roughness during turning of C45 hardened steel. Production Engineering Archives, 27(1), 30–35.10.30657/pea.2021.27.4
- Camposeco-Negrete, C., de Dios Calderon Najera, J., Miranda-Valenzuela, J. C., 2016. Optimization of cutting parameters to minimize energy consumption during turning of AISI 1018 steel at constant material removal rate using robust design, International Journal of Advanced Manufacturing Technology. 83, 1341–1347.10.1007/s00170-015-7679-9
- Chandrasekaran, K., Marimuthu, P., Raja, K., 2013. Prediction model for CNC turning on AISI316 with single and multi-layered cutting tool using box behnken design. International Journal of Engineering, Transactions A: Basics, 26(4), 401–410.10.5829/idosi.ije.2013.26.04a.09
- Deshpande, Y.V., Andhare, A.B., Padole, P.M., 2018. Application of ANN to estimate surface roughness using cutting parameters, force, sound and vibration in turning of Inconel 718. SN Applied Sciences, 1, 104–112.10.1007/s42452-018-0098-4
- Eskandri, B., Davoodi, B., Ghorbani, H., 2018. Multi-objective optimization of parameters in turning of N-155 iron-nickel base super alloy using gray realtional analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 233–245.10.1007/s40430-018-1156-y
- Ezugwu, E.O., Wang, Z.M., Machado, A.R., 1999. The machinability of nickel-based alloys: a review. Journal of Materials Processing Technology, 86, 1–16.10.1016/S0924-0136(98)00314-8
- Gunay, M., Korkmaz, M.E., Yasar, N., 2020. Performance analysis of coated carbide tool in turning of Nimonic 80A superalloy under different cuttting environments. Journal of Manufacturing Processes, 56,678–687.10.1016/j.jmapro.2020.05.031
- Kacal, A., 2020. Effect of machining parameters on turning of Inconel X750 using PVD coated carbide inserts. Journal of Scientific and Industrial Research, 79, 226–231.
- Khanna, N., Agrawal, C., Dogra, M., Pruncu, C.I., 2020. Evaluation of tool wear, energy consumption, and surface roughness during turning of Inconel 718 using sustainable machining technique. Journal of Materials Research Technology, 9, 5794–5804.10.1016/j.jmrt.2020.03.104
- Krynke, M., 2021. Management Optimizing the Costs and Duration Time of the Process in the Production System. Production Engineering Archives, 27(3), 163–170, DOI: 10.30657/pea.2021.27.2110.30657/pea.2021.27.21
- Mou, W., Zhu, S., 2020. Vibration, tool wear and surface roughness characteristic in turning of Inconel 718 alloy with ceramic insert under LN2 machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 369–380.10.1007/s40430-020-02438-8
- Parida, A. K., Maity, K., 2019. FEM analysis and experimental investigation of force and chip formation in hot turning of Inconel 625. Defence Technology, 15, 852–860.10.1016/j.dt.2019.04.012
- Sonawane, S.A., Ronge, B.P., Pawar, P.M., 2019. Multi-characteristic optimization of WEDM for Ti-6Al-4V by applying grey relational investigation during profile machining. Journal of Mechanical Engineering and Sciences, 13, 6059–6087.10.15282/jmes.13.4.2019.22.0478
- You, S.H., Lee, J.H., Oh, S.H., 2019. A study on cutting characteristics in turning operations of Titanium alloy used in automobile. International Journal of Precision Engineering and Manufacturing, 20, 209–216.10.1007/s12541-019-00027-x
- Yousefi, S., Zohoor, M., 2019. Effect of cutting parameters on the dimensional accuracy and surface finish in the hard turning of MDN250 steel with cubic boron nitride tool, for developing knoledged base expert system. International Journal of Mechanical and Materials Engineering, 14, 1–13.10.1186/s40712-018-0097-7
Language: English
Page range: 277 - 282
Submitted on: Jun 13, 2021
Accepted on: Sep 22, 2021
Published on: Nov 20, 2021
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2021 Sachin Sonawane, Sandeep Wangikar, Kuldip Pukale, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.