Influence of laser texturing on tribological properties of DLC coatings
References
- Antoszewski, B., 2010. Textured surface layers-shaping with selected beam technologies and tribological properties, Wydawnictwo Politechniki Świętokrzyskiej, Kielce.
- Bochenek, D., Niemiec, P., Korzekwa, J., Durtka, B., Stokłosa, Z., 2018. Microstructure and properties of the ferroelectric-ferromagnetic PLZT-ferrite composites, Symmetry, 10, art. 59, DOI: 10.3390/sym1003005910.3390/sym10030059
- Chatys, R., Orman, Ł.J., 2017. Technology and properties of layered composites as coatings for heat transfer enhancement, Mechanics of Composite Materials, 53, 351-360, DOI: 10.1007/s11029-017-9666-810.1007/s11029-017-9666-8
- Dudek, A., Wlodarczyk, R., 2010. Structure and properties of bioceramics layers used for implant coatings, Solid State Phenomena, 165, 31-36, DOI: 10.4028/www.scientific.net/SSP.165.3110.4028/www.scientific.net/SSP.165.31
- Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobȩdza, J., 2017. The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model, METAL 2017 26th Int. Conf. on Metallurgy and Materials, Ostrava, Tanger, 1252-1257.
- Esteve, J., Polo, M.C., Sanchez, G., 1999. Diamond and diamond-like carbon films, Vacuum, 52, 133-139,10.1016/S0042-207X(98)00231-0
- Galindo, H., Prieto, P., Rincon, C., Sanchez, N.A, Zambrano, G., 2000. Characterization of diamond-like carbon (DLC) thin films prepared by R.F. magnetron sputtering, Thin Solid Films, 373, 247-250.10.1016/S0040-6090(00)01090-7
- Korzekwa, J., Bara, M., Pietraszek, J., Pawlus, P., 2016. Tribological behaviour of Al2O3/inorganic fullerene-like WS2 composite layer sliding against plastic, International Journal of Surface Science and Engineering, 10, 570-584, DOI: 10.1504/IJSURFSE.2016.08103510.1504/IJSURFSE.2016.081035
- Korzekwa, J., Gądek-Moszczak, A., Zubko, M., 2018. Influence of the Size of Nanoparticles on the Microstructure of Oxide Coatings, Materials Science, 53, 709-716, DOI: 10.1007/s11003-018-0127-x10.1007/s11003-018-0127-x
- Lipiński, T., 2015a. Influence of surface refinement on microstructure of Al-Si cast alloys processed by welding method, Manufacturing Technology, 15, 576-581.10.21062/ujep/x.2015/a/1213-2489/MT/15/4/576
- Lipiński, T., 2015b. Modification of Al-11% Si alloy with Cl-based modifier, Manufacturing Technology, 15, 581-587.10.21062/ujep/x.2015/a/1213-2489/MT/15/4/581
- Lipiński, T., 2017. Corrosion effect of 20% NaCl solution on basic carbon structural S235JR steel, Engineering for Rural Development, 16, 1069-1074, DOI: 10.22616/ERDev2017.16.N22510.22616/ERDev2017.16.N225
- Lipiński, T., Karpisz, D., 2020a. Effect of animal slurry on carbon structural s235jr steel at 318 K, METAL 2020 29th Int. Conf. on Metallurgy and Materials, Ostrava, Tanger, 643-648, DOI: 10.37904/metal.2020.356910.37904/metal.2020.3569
- Lipiński, T., Karpisz, D., 2020b. Effect of modification time on microstructure and tensile strength AlSi9Mg alloy with Sr, Ti and B additions using in agricultural machinery, Engineering for Rural Development, 19, 1476-1481, DOI: 10.22616/ERDev2020.19.TF36710.22616/ERDev.2020.19.TF367
- Lipiński, T., Karpisz, D., 2020c. Effect of NaNO3, NaClO3 and TiO2 on mechanical properties AlSi7Mg alloy, METAL 2020 29th Int. Conf. on Metallurgy and Mate-rials, Ostrava, Tanger, 886-891, DOI: 10.37904/metal.2020.362710.37904/metal.2020.3627
- Lipiński, T., Wach, A., Karpisz, D., 2020. Influence the non-metallic inclusions on bending fatigue strength of medium-carbon structural steel melted in an electric furnace, METAL 2020 29th Int. Conf. on Metallurgy and Materials, Ostrava, Tanger, 25-30, DOI: 10.30657/pea.2020.26.1810.30657/pea.2020.26.18
- Madej, M., 2013. Properties of tribological systems with diamond-like coatings, Wydawnictwo Politechniki Świętokrzyskiej, Kielce.10.4028/www.scientific.net/AMR.874.9
- Madej, M., 2014. The effect of TiN and CrN interlayers on the tribological behavior of DLC coatings, Wear, 317, 179-187.10.1016/j.wear.2014.05.008
- Majewski, G., Telejko, M., Orman, Ł.J., 2017. Preliminary results of thermal comfort analysis in selected buildings, E3S Web of Conferences, 17, art. 00056, DOI: 10.1051/e3sconf/2017170005610.1051/e3sconf/20171700056
- Mansano, R.D., Mousinho, A.P., Salvadori, M.C., 2010. Nanostructured diamond-like carbon films characterization, Journal of Alloys and Compounds, 495, 620-624.10.1016/j.jallcom.2009.10.195
- Orman, L.J., 2014. Boiling heat transfer on single phosphor bronze and copper mesh microstructures, EPJ Web of Conferences, 67, art. 2087, DOI: 10.1051/epjconf/2014670208710.1051/epjconf/20146702087
- Ozimina, D., Madej M., Kowalczyk J., Suchanek J., Taticek F., Kolariikova M., 2012. Wear of diamond-like coatings depending on the type of coating composition and materials of the rubbing pair. Tribiologia, 3, 127-136.
- Pacana A., Czerwińska K., Dwornicka R., 2019. Analysis of non-compliance for the cast of the industrial robot basis. METAL 2019 28th Int. Conf. on Metallurgy and Mate-rials, Ostrava, Tanger, 664-650.10.37904/metal.2019.869
- Pietraszek J., Dwornicka R., Szczotok A., 2016. The bootstrap approach to the statistical significance of parameters in the fixed effects model. ECCOMAS Congress 2016 – Proc. 7th European Congress on Computational Methods in Applied Sciences and Engineering, 3, 6061-6068, DOI: 10.7712/100016.2240.920610.7712/100016.2240.9206
- Pietraszek, J., Goroshko, A., 2014. The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome, Advanced Materials Research, 874, 145-149, DOI: 10.4028/www.scientific.net/AMR.874.14510.4028/www.scientific.net/AMR.874.145
- Pliszka, I., Radek, N., 2017. Corrosion Resistance of WC-Cu Coatings Produced by Electrospark Deposition, Procedia Engineering, 192, 707-712.10.1016/j.proeng.2017.06.122
- Radzyminska-Lenarcik E., Ulewicz R., Ulewicz M., 2018. Zinc recovery from model and waste solutions using polymer inclusion membranes (PIMs) with 1-octyl-4-methylimidazole, Desalination and Water Treatment, 102, 211-219, DOI: 10.5004/dwt.2018.2182610.5004/dwt.2018.21826
- Ryk G., Klingerman Y., Etsion I., 2002. Experimental investigation of laser surface texturing for reciprocating automotive components, Tribology Transactions, 45, 444-449.10.1080/10402000208982572
- Skrzypczak-Pietraszek, E., 2015. Phytochemistry and biotechnology approaches of the genus Exacum, In: Rybczyński J., Davey M., Mikuła A. (eds) The Gentianaceae – Vol. 2: Biotechnology and Applications, Springer, Berlin, Heidelberg, 383-401, DOI: 10.1007/978-3-642-54102-5_1610.1007/978-3-642-54102-5_16
- Szala, M., Dudek, A., Maruszczyk, A., Walczak, M., Chmiel, J., Kowal, M., 2019. Effect of atmospheric plasma sprayed TiO2–10% NiAl cermet coating thickness on cavitation erosion, sliding and abrasive wear resistance, Acta Physica Polonica A, 136, 335-341, DOI: 10.12693/APhysPolA.136.33510.12693/APhysPolA.136.335
- Tokar, D., 2019. Evaluation of the properties of laser textured DLC coatings, Master’s thesis, Kielce.
- Trzewiczek, K., Szczotok, A., Gadek-Moszczak, A., 2014. Evaluation of the state for the material of the live steam superheater pipe coils of V degree, Advanced Materials Research, 874, 35-42, DOI: 10.4028/www.scientific.net/AMR.874.310.4028/www.scientific.net/AMR.874.3
- Ulewicz, R., 2014. Application of servqual method for evaluation of quality of educational services at the university of higher education, Polish Journal of Management Studies, 9, 254-264.
- Ulewicz, R., Nový, F., Selejdak, J., 2014. Fatigue strength of ductile iron in ultra-high cycle regime, Advanced Materials Research, 874, 43-48, DOI: 10.4028/www.scientific.net/AMR.874.4310.4028/www.scientific.net/AMR.874.43
- Wojnar, L., Gadek-Moszczak, A., Pietraszek, J., 2019. On the role of histo-morphometric (stereological) microstructure parameters inthe prediction of vertebrae compression strength, Image Analysis and Stereology, 38, 63-73, DOI: 10.5566/ias.202810.5566/ias.2028
Language: English
Page range: 119 - 123
Submitted on: Mar 8, 2021
Accepted on: Jun 14, 2021
Published on: Jun 12, 2021
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2021 Norbert Radek, Dorota Tokar, Artur Kalinowski, Jacek Pietraszek, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.