Investigation of corrosion rate of X55CrMo14 stainless steel at 65% nitrate acid at 348 K
By: Tomasz Lipiński
References
- Dalmau, A., Richard, C., Igual–Muñoz, A., 2018. Degradation mechanisms in martensitic stainless steels: Wear, corrosion and tribocorrosion appraisal, Tribology International, 121, 167-179.10.1016/j.triboint.2018.01.036
- Dudek, A., Wrońska, A., Adamczyk, L., 2014. Surface remelting of 316L+434L sintered steel: microstructure and corrosion resistance, Journal Solid State Electronics, 18(11), 2973-2981.10.1007/s10008-014-2483-2
- Duryahina, Z.A., Makhorkin, I.M., Lazko, H.V., Bychyns’kyi, V.I., 2007. Evaluation of temperature fields in corrosion-resistant steels under the action of laser radiation, Materials Science, 43(6), 800-806.10.1007/s11003-008-9025-y
- El-Meligy, M., El-Bitar, T., 2020. Hot workability of 420 J1 martensitic stainless steel, Procedia Manufacturing, 50, 771-776.10.1016/j.promfg.2020.08.139
- Führer, U., Aktaa, J., 2018. Modeling the cyclic softening and lifetime of ferritic-martensitic steels under creep-fatigue loading, International Journal of Mechanical Sciences, 136, 460-474.10.1016/j.ijmecsci.2017.12.042
- Cheng X.L., Ma H.Y., Chen S.H., Chen X., Chen S.H., Yang H.Q., 1998. Corrosion of Iron in Acid Solutions with Hydrogen Sulfide Corrosion Sciences, 41(2), 321-329.10.1016/S0010-938X(98)00125-5
- Christopher, J., Choudhary, B.K., 2018. On the onset of necking instability in tempered martensitic 9% Cr steels, Mechanics Research Communications, 94, 114-119.10.1016/j.mechrescom.2018.10.004
- Krynke, M., Selejdak, J., Borkowski, S., 2012. The Quality of Materials Applied for Slewing Bearing Raceway, Materials Engineering, 19(4), 157-163.
- Lipiński, T., 2016. Corrosion Resistance of 1.4362 Steel in Boiling Nitric Acid, Manufacturing Technology, 16(5), 1004-1009.10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1004
- Lipiński, T., 2017. Corrosion Effect of 20% NaCl Solution on Basic Carbon Structural S235JR Steel. 16th International Scientific Conference Engineering for Rural Development, Proceedings 16, Jelgava, 24-26.05.2017, 1069-1074.10.22616/ERDev2017.16.N225
- Lipiński, T., Wach, A., 2015. Dimensional Structure of Non-Metallic Inclusions in High-Grade Medium Carbon Steel Melted in an Electric Furnace and Subjected to Desulfurization, Solid State Phenomena, 223, 46-53.10.4028/www.scientific.net/SSP.223.46
- Liu, Z., Wang, X., Dong, C., 2020. Effect of boron on G115 martensitic heat resistant steel during aging at 650 °C, Materials Science and Engineering, 787, 139529.10.1016/j.msea.2020.139529
- Majewski, G., Orman, Ł.J., Telejko, M., Radek, N., Pietraszek, J., Dudek A., 2020. Assessment of thermal comfort in the intelligent buildings in view of providing high quality indoor environment, Energies 13(8), 1973.10.3390/en13081973
- Martensitic stainless steel, www.outokumpu.com, (accesss 15.02.2021)
- Miletić, I., Ilić, A., Nikolić, R.R., Ulewicz, R., Ivanović, L., Sczygiol, N., 2020. Analysis of Selected Properties of Welded Joints of the HSLA Steels, Materials, 13, 1301, DOI: 10.3390/ma1306130110.3390/ma13061301714379532183036
- Pan, L., Kwok, C.T., Lo, K.H., 2020. Friction-stir processing of AISI 440C high-carbon martensitic stainless steel for improving hardness and corrosion resistance, Journal of Materials Processing Technology, 277, 11644810.1016/j.jmatprotec.2019.116448
- Pietraszek, J., Gądek-Moszczak, A., Radek, N., 2015. the estimation of accuracy for the neural network approximation in the case of sintered metal properties. Recent Developments in Computa-tional Collective Intelligence, 125-134.10.1007/978-3-319-01787-7_12
- Pietraszek, J., Skrzypczak-Pietraszek, E., 2014. The Optimization of the Technological Process with the Fuzzy Regression, Advanced Materials Research, 874, 151-155.10.4028/www.scientific.net/AMR.874.151
- Saha, N., Basu, J., Sen, P., Majumdar, G., 2020, Electrochemical behaviour of martensitic stainless steel with blood, Materials Today: Proceedings, 26(2), 677-680.10.1016/j.matpr.2019.12.364
- Scendo, M., Trela, J., Radek, N., 2012. Purine as an effective corrosion inhibitor for stainless steel in chloride acid solutions, Corrosion Reviews, 30(1-2), 33-45.10.1515/corrrev-2011-0039
- Scendo, M., Trela, J., Radek, N., 2014. Influence of laser power on the corrosive resistance of WC-Cu coating, Surface & Coatings Technology 259, 401-407.10.1016/j.surfcoat.2014.10.062
- Seidametova, G., Vogt, J., Serre, I., 2018. The early stage of fatigue crack initiation in a 12%Cr martensitic steel, International Journal of Fatigue, 106, 38-48.10.1016/j.ijfatigue.2017.09.006
- Selejdak, J., 2003. Influencing factors onto quality of welded pipes, Metalurgija, 42(1), 65-67.
- Szabracki, P., Lipiński, T., 2013. Effect of Aging on the Microstructure and the Intergranular Corrosion Resistance of X2CrNiMoN25-7-4 Duplex Stainless Steel, Solid State Phenomena, 203-204, 59-62.10.4028/www.scientific.net/SSP.203-204.59
- Szabracki, P., Lipiński, T., 2014. Influence of sigma phase precipitation on the intergranular corrosion resistance of X2CrNiMoN25-7-4 super duplex stainless steel. 23rd International Conference on Metallurgy and Materials METAL, 2014, 476-481.
- Lipiński, T., 2016. Corrosion rate of the X2CrNiMoN22-5-3 duplex stainless steel annealed at 500°C, Acta Phisica Polonica A, 130(4), 993-995.10.12693/APhysPolA.130.993
- Uhlig, H.H., Revie, R.W., 1985. Corrosion and corrosion control, 3rd Edition, John Wiley and Sons.
- Ulewicz, R., Mazur, M., Bokůvka, O., 2013. Structure and mechanical properties of fine-grained steels, Periodica Polytechnica Transportation Engineering, 41(2), 111-115.10.3311/PPtr.7110
- Ulewicz, R., Nový, F., 2017. Fatigue resistance and influence of cutting technology on the mechanical properties of modern steels used in the automotive industry, Procedia Engineering, 192, 899-904.10.1016/j.proeng.2017.06.155
- Ulewicz, R., Nový, F., 2019, Quality management systems in special processes, Transportation Research Procedia, 40, 113-118.10.1016/j.trpro.2019.07.019
- Ulewicz, R., Nový, F., Selejdak, J., 2014, Fatigue strength of ductile iron in ultra-high cycle regime, Advanced Materials Research, 874, 43-4810.4028/www.scientific.net/AMR.874.43
- Vicen, M., Bronček, J., Nový, F., 2019. Investigation of tribological properties of CarbonX coating deposited on 100Cr6 steel, Production Engineering Archives, 25(25), 52-55.10.30657/pea.2019.25.10
- Yang, Y., Cheng,Y.F., 2012. Parametric effects on the erosion–corrosion rate and mechanism of carbon steel pipes in oil sands slurry, Wear, 276-277, 141–148.10.1016/j.wear.2011.12.010
Language: English
Page range: 108 - 111
Submitted on: Mar 9, 2021
Accepted on: Jun 14, 2021
Published on: Jun 12, 2021
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2021 Tomasz Lipiński, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.