Effect of non-zero mean stress bending-torsion fatigue on fracture surface parameters of 34CrNiMo6 steel notched bars
References
- Abbott, E.J., Firestone, F.A., 1933. Specifying surface quality, Mech. Eng. 65, 569-572.
- Arsalani, M., Razfar, M.R., Abdullah, A., Khajehzadeh, M., 2020. Fatigue behavior improvement of hardened parts using sequential hard turning, grinding, and ball burnishing operations, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.10.1177/1464420720951889
- Böhm, M., Kowalski, M., Niesłony, A., 2015. Multiaxial fatigue test stand concept – Stand and control design, Adv. Intell. Syst. Comput. DOI: 10.1007/978-3-319-10990-9_4110.1007/978-3-319-10990-9_41
- Branco, R., Costa, J.D., Berto, F., Antunes, F.V., 2017. Effect of loading orientation on fatigue behaviour in severely notched round bars under non-zero mean stress bending-torsion, Theor. Appl. Fract. Mech., 92, 185-197. DOI: 10.1016/J.TAFMEC.2017.07.01510.1016/j.tafmec.2017.07.015
- Branco, R., Costa, J.D.M., Antunes, F.V., Perdigão, S., 2016. Monotonic and cyclic behavior of DIN 34CrNiMo6 tempered alloy steel, Metals (Basel). DOI: 10.3390/met605009810.3390/met6050098
- Branco, R., Costa, J.D.M., Berto, F., Razavi, S.M.J., Ferreira, J.A.M., Capela, C., Santos, L., Antunes, F., 2018. Low-cycle fatigue behaviour of AISI 18Ni300 maraging steel produced by selective laser melting, Metals (Basel). DOI: 10.3390/met801003210.3390/met8010032
- Carpinteri, A., Spagnoli, A., Vantadori, S., Viappiani, D., 2008. A multiaxial criterion for notch high-cycle fatigue using a critical-point method. Eng. Fract, Mech. DOI: 10.1016/j.engfracmech.2006.11.00210.1016/j.engfracmech.2006.11.002
- Feng, X., Senin, N., Su, R., Ramasamy, S., Leach, R., 2019. Optical measurement of surface topographies with transparent coatings, Opt. Lasers Eng. 121, 261–270. DOI: 10.1016/J.OPTLASENG. 2019.04.01810.1016/j.optlaseng.2019.04.018
- Fonte, M., Romeiro, F., Freitas, M., 2007. Environment effects and surface roughness on fatigue crack growth at negative R-ratios, Int. J. Fatigue 29, 1971-1977. DOI: 10.1016/J.IJFATIGUE.2007.02.02710.1016/j.ijfatigue.2007.02.027
- Goldsmith, N.T., Wanhill, R.J.H., Molent, L., 2019. Quantitative fractography of fatigue and an illustrative case study, Eng. Fail. Anal. 96, 426-435. DOI: 10.1016/J.ENGFAILANAL.2018.10.01310.1016/j.engfailanal.2018.10.013
- International Organization for Standardization, 2012. Geometrical product specifications (GPS) - Surface texture: Areal Part 2: Terms, definitions and surface texture parameters, Int. Stand. ISO. DOI: 10.1136/bmjopen-2015-00936610.1136/bmjopen-2015-009366460642826443663
- ISO 4287, 1997. Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters, Int. Organ. Stand. 25.
- Jamali, J., Mahmoodi, M.J., Hassanzadeh-Aghdam, M.K., Wood, J.T., 2019. A mechanistic criterion for the mixed-mode fracture of unidirectional polymer matrix composites, Compos, Part B Eng. 176, 107316. DOI: 10.1016/J.COMPOSITESB.2019.10731610.1016/j.compositesb.2019.107316
- Jollivet, T., Greenhalgh, E., 2015. Fractography, a Powerful Tool for Identifying and Understanding Fatigue in Composite Materials, Procedia Eng. 133, 171-178. DOI: 10.1016/J.PROENG.2015.12.64610.1016/j.proeng.2015.12.646
- Kaplonek, W., Nadolny, K., Królczyk, G.M., 2016. The use of focus-variation microscopy for the assessment of active surfaces of a new generation of coated abrasive tools, Meas. Sci. Rev. DOI: 10.1515/msr-2016-000710.1515/msr-2016-0007
- Kowal, M., Szala, M., 2020. Diagnosis of the microstructural and mechanical properties of over century-old steel railway bridge components, Eng. Fail. Anal. 110, 104447. DOI: 10.1016/J.ENGFAILANAL. 2020.10444710.1016/j.engfailanal.2020.104447
- Lachowicz, C. T., Owsiński, R. 2020. Comparative analysis of fatigue energy characteristics of S355J2 steel subjected to multi-axis loads, Materials, 13(11) https://doi:10.3390/ma1311247010.3390/ma13112470732129032481750
- Macek, W., 2019a. Post-failure fracture surface analysis of notched steel specimens after bending-torsion fatigue, Eng. Fail. Anal. DOI: 10.1016/j.engfailanal.2019.07.05610.1016/j.engfailanal.2019.07.056
- Macek, W., 2019b. Fractal analysis of the bending-torsion fatigue fracture of aluminium alloy, Eng. Fail. Anal. 99, 97-107. DOI: 10.1016/J.ENGFAILANAL.2019.02.00710.1016/j.engfailanal.2019.02.007
- Macek, Wojciech, Branco, R., Szala, M., Marciniak, Z., Ulewicz, R., Sczygiol, N., Kardasz, P., 2020a. Profile and Areal Surface Parameters for Fatigue Fracture Characterisation, Materials (Basel). 13, 3691. DOI: 10.3390/ma1317369110.3390/ma13173691750432832825494
- Macek, W., Branco, R., Trembacz, J., Costa, J.D., Ferreira, J.A.M., Capela, C., 2020. Effect of multiaxial bending-torsion loading on fracture surface parameters in high-strength steels processed by conventional and additive manufacturing. Eng. Fail. Anal. 118. DOI: 10.1016/j.engfailanal.2020.10478410.1016/j.engfailanal.2020.104784
- Pawliczek, R., Prażmowski, M., 2015. Study on material property changes of mild steel S355 caused by block loads with varying mean stress, Int. J. Fatigue. DOI: 10.1016/j.ijfatigue.2015.05.01910.1016/j.ijfatigue.2015.05.019
- Pejkowski, Ł., Skibicki D., Seyda J., 2018. Stress-strain response and fatigue life of a material subjected to asynchronous loadings, AIP Conference Proceedings 2028, 020016; DOI: 10.1063/1.506640610.1063/1.5066406
- Robak, G., 2020. Using a variable value of the fictitious radius to estimate fatigue life of notched elements, Fatigue and Fracture of Engineering Materials and Structures, 43(9), 2006-2023. DOI: 10.1111/ffe.1328010.1111/ffe.13280
- Rozumek, D., Marciniak, Z., Lesiuk, G., Correia, J.A., de Jesus, A.M.P., 2018. Experimental and numerical investigation of mixed mode I + II and I + III fatigue crack growth in S355J0 steel, Int. J. Fatigue 113, 160-170. DOI: 10.1016/J.IJFATIGUE.2018.04.00510.1016/j.ijfatigue.2018.04.005
- Saito, S., Ogawa, F., Itoh, T., 2020. Investigation of fatigue strength under wide-ranged biaxial stress for two types of stainless steel using a thin-walled hollow cylinder specimen, Int. J. Fatigue 105611. DOI: 10.1016/J.IJFATIGUE.2020.10561110.1016/j.ijfatigue.2020.105611
- Senin, N., Thompson, A., Leach, R.K., 2017. Characterisation of the topography of metal additive surface features with different measurement technologies, Meas. Sci. Technol. DOI: 10.1088/1361-6501/aa7ce210.1088/1361-6501/aa7ce2
- Singh, A.K., Datta, S., Chattopadhyay, A., Riddick, J.C., Hall, A.J., 2019. Fatigue crack initiation and propagation behavior in Al – 7075 alloy under in-phase bending-torsion loading, Int. J. Fatigue 126, 346–356. DOI: 10.1016/J.IJFATIGUE.2019.05.02410.1016/j.ijfatigue.2019.05.024
- Sinha, S., Nene, S.S., Frank, M., Liu, K., Lebensohn, R.A., Mishra, R.S., 2020. Deformation mechanisms and ductile fracture characteristics of a friction stir processed transformative high entropy alloy, Acta Mater. 184, 164–178. DOI: 10.1016/J.ACTAMAT.2019.11.05610.1016/j.actamat.2019.11.056
- Slámečka, K., Pokluda, J., Kianicová, M., Major, S., Dvořák, I., 2010. Quantitative fractography of fish-eye crack formation under bending-torsion fatigue, Int. J. Fatigue 32. DOI: 10.1016/j.ijfatigue.2009.07.00910.1016/j.ijfatigue.2009.07.009
- Stach, S., Sapota, W., Ţălu, Ş., Ahmadpourian, A., Luna, C., Ghobadi, N., Arman, A., Ganji, M., 2017. 3-D surface stereometry studies of sputtered TiN thin films obtained at different substrate temperatures, J. Mater. Sci. Mater. Electron. DOI: 10.1007/s10854-016-5774-910.1007/s10854-016-5774-9
- Stemp, W.J., Macdonald, D.A., Gleason, M.A., 2019. Testing imaging confocal microscopy, laser scanning confocal microscopy, and focus variation microscopy for microscale measurement of edge cross-sections and calculation of edge curvature on stone tools: Preliminary results, J. Archaeol. Sci. Reports 24, 513-525. DOI: 10.1016/J.JASREP.2019.02.01010.1016/j.jasrep.2019.02.010
- Susmel, L., Petrone, N., 2003. Multiaxial fatigue life estimations for 6082-T6 cylindrical specimens under in-phase and out-of-phase biaxial loadings, Eur. Struct. Integr. Soc. 31, 83-104. DOI: 10.1016/S1566-1369(03)80006-710.1016/S1566-1369(03)80006-7
- Szala, M., 2017. Application of computer image analysis software for determining incubation period of cavitation erosion – preliminary results, ITM Web Conf. 15 06003 DOI: 10.1051/itmconf/2017150600310.1051/itmconf/20171506003
- Trško, L., Lago, Ján, Jambor, M., Nový, F., Bokůvka, O., Florková, Z. 2020. Microstructure and residual stress analysis of Strenx 700 MC welded joint, Production Engineering Archives, 26(2), 41-44. DOI: 10.30657/pea.2020.26.0910.30657/pea.2020.26.09
- Ulewicz, R., Nový, F., Novák, P., Palček, P., 2019. The investigation of the fatigue failure of passenger carriage draw-hook, Eng. Fail. Anal. 104, 609-616. DOI: 10.1016/j.engfailanal.2019.06.03610.1016/j.engfailanal.2019.06.036
- Ulewicz, R., Szataniak, P., Novy, F. 2014. Fatigue Properties Of Wear Resistant Martensitic Steel, Metal 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings
- Vanderesse, N., Texier, D., Bocher, P., 2020. Effect of porosities on brazed martensitic steel tensile properties: 2D and 3D pre-mortem vs postmortem characterizations, Mater. Charact. 160, 110084. DOI: 10.1016/J.MATCHAR.2019.11008410.1016/j.matchar.2019.110084
- Wu, Q., Liu, X., Liang, Z. et al. 2020. Fatigue life prediction model of metallic materials considering crack propagation and closure effect, J Braz. Soc. Mech. Sci. Eng. 42, 424. DOI: 10.1007/s40430-020-02512-110.1007/s40430-020-02512-1
- Yang, D., Xiao, X., Liu, Y., & Sun, J., 2019. Peripheral milling-induced residual stress and its effect on tensile–tensile fatigue life of aeronautic titanium alloy Ti–6Al–4V, The Aeronautical Journal, 123(1260), 212-229. DOI: doi:10.1017/aer.2018.15110.1017/aer.2018.151
Language: English
Page range: 167 - 173
Submitted on: Oct 3, 2020
Accepted on: Nov 18, 2020
Published on: Dec 31, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2020 Wojciech Macek, Mirosław Szala, Jarosław Trembacz, Ricardo Branco, José Costa, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.