Relationship between surface roughness and chip morphology when turning hardened steel
By: Youcef Abidi
References
- Abidi, Y., Boulanouar, L., 2017. Analyse de la correlation entre la rugosite et la vibration de coupe en usinage des aciers durcis.U.P.B. Sci. Bull., Series D, 79, 4, 157-170.
- Abidi, Y., Boulanouar, L., Amirat, A., 2018. Experimental study on wear of mixed ceramic tool and correlation analysis between surface roughness and cutting tool radial vibrations during hard turning of AISI 52100 steel, Journal of Engineering Science and Technology, 13, 4, 943-963.
- Anthony, X.M., 2015. Analysis of cutting force and chip morphology during hard turning of AISI D2 steel, Journal of Engineering Science and Technology, 10, 3, 282-290.
- Azizi, M.W., Keblouti, O., Boulanouar, l., Yallese, M.A., 2020. Design optimization in hard turning of E19 alloy steel by analysing surface roughness, tool vibration and productivity, Structural Engineering and Mechanics, 73,5, 501-513.
- Barry, J., Byrne, G., 2002, The Mechanisms of Chip Formation in Machining Hardened Steels,Transactions of the ASME, 124, 528-535.
- Ben Salem, S., Bayraktar, E., Boujelbene, M.,Katundi, D., 2012. Effect of cutting parameters on chip formation in orthogonal cutting, Journal of Acheivementsin Materials and Manufacturing Engineering, 50, 1, 7-17.
- Bouacha, K., Yallesse, M.A., Mabrouki, T., Rigal, J.F., 2010. Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool, Int. Journal of Refractory Metals & Hard Materials, 28, 349-361.
- Bouziane, A., Boulanouar, l., Azizi, M.W., Keblouti, O., Belhadi, S. 2018. Analysis of cutting forces and roughness during hard turning of bearing steel, Structural Engineering and Mechanics, 66, 3, 285-294.
- Das, A., Khan, A., Mohanty, S., 2015. Optimization of machining parameters using taguchi approach during hard turning of alloy steel with uncoated carbide under dry cutting environment, International Journal of lean Thinking, 6, 2, 1-15.
- Daymi, A., Boujelbene, M., Ben Salem, S., Hadj Sassi, B., Torbaty, S., 2009, Effect of the cutting speed on the chip morphology and the cutting forces, Archives of Computational Materials Science and Surface Engineering, 1, 2, 77-83.
- D’Addona, D.M.,Raykar, S.J., 2016, Analysis of surface roughness in hard turning using wiper insert geometry, Procedia CIRP,41, 841-846.
- Dogra, M., Sharma, V.S., Sachdeva, A., Suri, N.M., Dureja, J.S., 2010. Tool wear, chip formation and workpiece surface issues in CBN hard turning: a review, International Journal of Precision Engineering and Manufacturing, 11, 2, 341-358.
- Ekinović, S., Begović, E., Fakić, B., Burić, A., Čeliković, A., 2014. Cold air dry machining Part 2: SEM and metallographic analysis of the chip, 18th Trends in the Development of Machinery and Associated Technology · TMT 2014, Budapest, Hungary,21-24.
- Elshwain, A., 2020. Comprehensive Study of Chip Morphology in Turning Hardened Tool Steel under Nitrogen Gas and Oil Mist Conditions, International Conference on Technical Sciences (ICST2019), March 2019, 1176-1182.
- Keblouti, O., Boulanouar, L., Azizi, M.W., Bouziane, A., 2019. Multi response optimization of surface roughness in hard turning with coated carbide tool based on cutting parameters and tool vibration, Structural Engineering and Mechanics, 70, 4, 395-405.
- Khorasani, A.M., Yazdi, M.R.S.,Safizadeh, M.S., 2012. Analysis of machining parameters effects on surface roughness: a review, Int. J. Computational Materials Science and Surface Engineering, 5, 1, 69-84.
- Kumar, C.S,Patel, S.K.,2017. Experimental and numerical investigations on the effect of varying AlTiN coating thickness on hard machining performance of Al2O3-TiCN mixed ceramic inserts, Surface & Coatings Technology, 309, 266-281.
- Mabrouki, T., Courbon, C., Zhang, Y., Rech, J. Nélias, D., Asad, M. Hamdi, H., Belhadi, S.,Salvatore, F., 2016. Some insights on the modelling of chip formation anditsmorphology during metal cutting operations, Comptes Rendus Mécanique, 344, 4, 335-354.
- Meddour, I., Yallese, M.A., Khattabi, R., Elbah, M., Boulanouar, L., 2015. Investigation and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool: cutting conditions optimization, Int J Adv Manuf Technol, 77, 1387-1399.
- Motorcu, A.R., 2011. Tool life performances, wear mechanisms and surface roughness characteristics when turning austenised and quenched AISI 52100 bearing steel with ceramics and CBN/TiC cutting tools, Indian Journal of Engineering & Materials Sciences, 18, 137-146.
- Neslušan, M., Šípek, M., Mrázik, J.,2012. Analysis of chip formation during hard turning through acoustic emission, Materials Engineering - Mate-riálové inžinierstvo, 19, 1-11.
- Ozel, U., Hsu, T.K.,Zeren, E., 2005. Effects of cutting edge geometry, work-piece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel, Int J Adv Manuf Technol,25, 262-269.
- Rajeev, D., Dinakaran, D., Kanthavelkumaran, N., Austin, N.,2016. Experimental study of surface roughness in hard turning of AISI4140 steel with coated carbide tool, World Applied Sciences Journal, 34, 10, 1310-1317.
- Sadik, M.I., Lindström, B., 1995. The effect of restricted contact length on tool performance, Journal of Materials Processing Technology, 48, 275-282.
- Sahoo, A.K.,Sahoon, B., 2012. Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts, Measurement, 45, 2153-2165.
- Vyas, A., Shaw, M.C., 1999. Mechanics of saw-tooth chip formation in metal cutting”, Journal of Manufacturing science and Engeneering, 121(2), 163-172.
- Watmon, T.B., Ijeh, A.C., 2010. Coating cutting tools with hard substance lowers friction coefficient and improves tool life - a review, Proceedings of the International Multiconference of Engineer and Computer Scientists, 3, Hong Kong, March 17-19.
- Yadav, L., 2016. Analysis of chip formation during hard turning through acoustic emission. International Journal of Mechanical Engineering, 4, 11, 34-38.
- Zhang, S., Li, J., Zhu, X., Lv, H., 2013. Saw-tooth chip formation and its effect on cutting force fluctuation in turning of inconel 718, International Journal of Precision Engineering and Manufacturing, 14, 957-963.
- Zhang, X.P., Wu, S.B., 2016. Chip control in the dry machining of hardened AISI 1045 steel, Int J Adv Manuf Technol, 88, 3319-3327.
Language: English
Page range: 92 - 98
Submitted on: Jun 28, 2020
Accepted on: Aug 3, 2020
Published on: Sep 29, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2020 Youcef Abidi, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.