Tribological behavior of low-alloyed steel after nitriding
References
- Atapour, A., Ashrafizadeh, F., 2008. Tribology and cyclic oxidation behaviour of plasma nitride valve steel, Surface and Coatings Technology, 4922-4929.10.1016/j.surfcoat.2008.04.051
- Binder, C., Bendo, T., Hammes, G., Klein, A.N., de Mello, J.D.B., 2015. Effect of nature of nitride phases on sliding wear of plasma nitride sintered iron, Wear 332-333, 995-1005.10.1016/j.wear.2015.01.083
- Bronček, J., Vicen, M., Fabian, P., Radek, N., 2020. Investigation of the tribo-logical properties of the nitride layer on heat-treated Steel 100Cr6, Current Methods of Construction Design, Lecture Notes in Mechanical Engineering, ISSN 2195-4364, 463-471.10.1007/978-3-030-33146-7_53
- Drábik, M., Ballo, V., Truchlý, M., Frkáň, J., Roch, T., Kvetková, L., Satrapinskyy, L., Kúš, P., 2016. Influence of plasma pretreatment on the performance of industrial tungsten carbide coatings deposited at low temperature on 100Cr6 bearing steel substrates, Surface and Coatings Technology, Vol. 293, 2-9.10.1016/j.surfcoat.2016.01.035
- Drabik, M.,Truchlý, M., Ballo, V., Roch, T., Kvetková, L., Kúš, P., 2018. Influence of substrate material and its plasma pretreatment on adhesion and properties of WC/a-C:H nano-composite coatings deposited at low temperature, Surface and coatings technology, 333,138-147.10.1016/j.surfcoat.2017.10.081
- Hazlinger, M., Moravčík, R., 2013. Chemical-heat treatment of materials, 1st edition – STU Bratislava. ISBN 978-80-227-3924-5 (In Slovak).
- Kuffova, M., Čelko, P., 2015. Application of plasma nitriding on low-alloy (50CrV4+QT) steel in order to improve its fatigue resistance, Kovove materialy – Metallic materials, 53, 4430450.10.4149/km_2015_6_443
- Landová, M., Brezinová, J., 2017. Effect of tribological conditions for properties thermal spraying, Production Engineering Archives, 14, 37-39.10.30657/pea.2017.14.09
- Li, C., Takeichi, Y., Shimizu, S., Uemura, M., Dzimko, M., Tsuya, Y., 2000. Tribological behavior of bonded solid lubricant film in air and in vacuum, Communications -Scientific Letters of University of Zilina, 2(3), 77-83.10.26552/com.C.2000.1.77-83
- Takeichi, Y., Dzimko, M., Winkelmann, W., 2010. The effects of MoO3 powder lubrication on tribological properties of sliding pair exposed to high temperature, Communications -Scientific Letters of University of Zilina, 12(2), 67-71.10.26552/com.C.2010.2.67-71
- Terres, M.A., Ammari, L., Chérif, A., 2017. Study of the Effect of Gas Nitriding Time on Microstructure and Wear Resistance of 42CrMo4 Steel, Materials Sciences and Applications, 8, 493-507.10.4236/msa.2017.86034
- Ulewicz, R., Nový, N., Mazur, M., Szataniak, P., 2014. Fatigue properties of the HSLA steel in high and ultra-high cycle region, Production Engineering Archives, 4(3), 18-21.10.30657/pea.2014.04.05
- Zhou, Z. A., Fu, W. T., Zhang, R. H., Qi, J. J., Jin, G. F., Wang, Z. H., Sun, S. H., 2018. Analysis of gas nitriding characteristics under different cold hardening and nitriding pressure conditions for low-carbon low-alloy steel, Strength of Materials, 50(1), 211-217.10.1007/s11223-018-9961-1
Language: English
Page range: 78 - 83
Submitted on: May 11, 2020
Accepted on: Jul 7, 2020
Published on: Sep 29, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2020 Martin Vicen, Otakar Bokůvka, Ružica Nikolić, Jozef Bronček, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.